738395
13
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
1
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T: 01949 862 012 F: 01949 862 003 E: service@cda.eu W: www.cda.eu
MFU800 integrated under
counter freezer
Manual for Installation, Use and Maintenance
2
Important
The CDA Group Ltd cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product. Please note
that CDA reserve the right to invalidate the guarantee supplied
with this product following incorrect installation or misuse of the
appliance.
This appliance is not designed to be used by people (including
children) with reduced physical, sensorial or mental capacity, or
who lack experience or knowledge about it, unless they have had
supervision or instructions on how to use the appliance by someone
who is responsible for their safety.
Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.
Appliance information:
Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault
with your appliance and to register your appliance for guarantee
purposes.
Appliance Model
Serial Number
3
CE Declarations of Conformity:
This appliance has been designed, constructed and marketed in
compliance with safety requirements of EEC Directive 2006/95/EEC
(Low voltage) and requirements of EMC Directive 2004/108/EEC.
This appliance has been manufactured to the strictest standards and
complies with all applicable legislation, including Electrical safety
(LVD) and Electromagnetic interference compatibility (EMC). Parts
intended to come into contact with food conform to EEC/89/109.4
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed
of as urban waste. It must be taken to a special local authority
dierentiated waste collection centre or to a dealer providing this
service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and resources. As a
reminder of the need to dispose of household appliances separately,
the product is marked with a crossed-out wheeled dustbin.
4
Important
Never store inflammable or explosive items and strong
corrosive acids or alkalis in the appliance.
This is a household appliance, which is produced in
accordance with the national standard. It is intended for
food storage only, not for storage of blood, medicine and
biological products.
To prevent risk of fire, keep the appliance away from
petrol or any other inflammables.
To prevent risk of electromagnetic interference or other
accidents, do not place a microwave oven on top of
the refrigerator or use any electric appliance inside the
refrigerator.
Do not allow children to play with or near the appliance.
The internal surface of freezer compartment is very cold
when the appliance is running. Do not touch the surface
especially with wet hands.
Do not splash water onto the appliance. Keep it away
from places of high humidity that may have adverse
eect on the electric insulation performance.
Please remove the door, door seal and shelves before
disposal of the old appliance and put them away in a safe
place to prevent children from being entrapped.
5
Before First Use
You must allow the freezer to settle for at least twenty four hours
prior to switching the power on.
It is recommended that you clean the interior of the appliance prior
to first use, using a solution of bicarbonate of soda and warm water
and then thoroughly drying the interior.
The freezer may have an odour to it at first use. This will disappear as
the appliance cools.
Please note:
The appliance will work continuously until it comes down to the
correct temperature.
If the appliance is switched o, you should allow five minutes before
switching it on again to prevent unnecessary damage
to the compressor.
Never store inflammable or explosive items and strong corrosive
acids or alkalis in the appliance.
6
Use
Freezer
The freezer compartments are designed to store only frozen food.
Never put hot or warm foods in the freezer, allow them to cool fully
before putting them into the freezer.
Follow the instructions on the food packaging for storage of frozen
food. If no information is provided, foods should not be stored for
more than three months after the purchase date.
Store food in small packages (ideally less than 2.5kg). This
reduces the freezing time and improves the quality of the food
after thawing.
Wrap food before putting into the freezer. To stop the wrapping
sticking together, ensure it is dry.
Label the food before freezing with information including type of
food and dates of storage and expiry.
Once food is thawed, it must not be refrozen unless it has been
completely cooked. Only defrost as much food as is required to
prevent wastage.
Bottled or canned drinks should not be stored in the freezer
compartment as they could explode.
Only open the door for as long as is necessary. Leaving the
door open for long periods will aect the temperature inside the
appliance and waste energy.
Ensure all compartments are fully closed after use.
7
Control Panel
Thermostat dial
The thermostat can be set between
(least cold) and 5 (coldest)
When introducing large amounts of
fresh food into the freezer, turn the
thermostat dial to position 5. After 24
hours, return the thermostat dial to its
usual position.
fig. 1
1
2
3
4
5
8
Defrosting the Freezer
Do not use heaters or defrosting sprays in this appliance.
Never use any metallic or sharp objects to remove the ice as this
could damage the lining.
The freezer compartment should be defrosted regularly to ensure
the most ecient running of the freezer.
Once the ice is more than 5mm thick, the freezer should be
defrosted.
First remove the freezer drawers.
To speed up the process, place a bowl of warm water in the base of
the freezer compartment.
Once defrosting is complete, dry the inside of the freezer
compartment with a sponge or clean cloth.
The freezer should be cleaned using a solution of bicarbonate
of soda and lukewarm water. Do not use abrasive products or
detergents. After washing, rinse and dry thoroughly.
Clean the drawers separately by hand with soap and water. Do not
put them in the dishwasher.
Once cleaning is complete, then reconnect the power.
9
Troubleshooting
If you have any problems with your appliance, you should check
the troubleshooting prior to calling CDA Customer Care to prevent
unnecessary service calls and potential cost.
If the appliance is not working
Check there is power to the appliance:
The house fuses are intact and the fuse in the plug has not blown.
The thermostat is not set to 0 (o position).
The plug socket is functioning fine. To check this, plug another
electrical appliance in to see if the socket is working.
The temperature of the room is adequate (16°C or above).
The appliance is working, but not very well
The appliance is not overloaded.
The thermostat is set to an appropriate temperature.
The door is closing properly.
The cooling system at the rear of the appliance is clean and free of
dust, and not touching the rear wall.
There is enough ventilation at the side and rear walls.
The temperature of the room is adequate (16°C or above).
10
The appliance is noisy
The appliance is level and stable.
The side and rear walls are clear, and there is nothing resting on
the appliance.
The cooling gas in the refrigerator will make a slight bubbling
noise, even when the compressor is not running.
11
g. 2
g. 3
KIT
1
2
3
4
5
6
9
10
7
8
9
10
Installation
This appliance must never be installed close to heat sources i.e.
heating elements, radiators, cookers or in damp places.
The appliance should be mounted on a piece of wood (for example a
section of worktop or kitchen carcass) if a raised floor is to be fitted,
if the kitchen floor is to be tiled after installation, or if the installation
height of the appliance is greater than 850 mm.
Contents and Tools
Required
Fig. 2 - Installation kit contents
1. Wood screw (17 pcs)
2. Decor door fixing bracket
3. Decor door base fixings (2 pcs)
4. Decorative cover
5. Screw
6. Top bracket
Fig. 3 - Tools required
7. Spirit level
8. Spanner
9. Setsquare
10. Flathead screwdriver
12
g. 5
g. 3
g. 4
11
11
600
min
550
820-
890
595
548
min 25
819-
889
100- 170
5
6
11
11
Installation
Fig. 3 - Dimensions of the appliance
Fig. 4 - Fitting the worktop bracket
Remove the screw (5) on the top of the
appliance, locate the top bracket (6) and
fix the bracket with screw (5).
Fig. 5 - Fitting the spacer piece
Take out the spacer piece (11) located
on the side panel and remove the
protective tape. Stick the spacer piece
on the opposite side to the door hinges
of the appliance.
13
9
9
g. 8
Installation
Fig. 6 - Adjusting the appliance height
The height of the appliance can be
adjusted by the help of adjustable feet to
fit the furniture height. Use a spirit level
to ensure the appliance is level.
Fig. 7 - Aligning the appliance
Slide the appliance into the kitchen unit
and align the hinge surface with front
surface of the kitchen unit.
Fig. 8 - Fixing the appliance
Screw the hinges and metal bracket to
the kitchen unit using screws (1)
g. 6
g. 7
7
7
8
1
1
14
2
1
B-C
g. 11
Installation
Fig. 9 - Fitting the decor door bracket
Unscrew and remove the nuts and
washers from the appliance door. Place
fixing bracket on the appliance door by
inserting the holes to adjustment bolts.
Dimension B= Measure from the
underside surface of kitchen unit to the
bottom of fixing bracket.
Dimension C= Measure from the
underside surface of kitchen unit to the
top of next unit door.
Fig. 10 - Fitting the decor door bracket
Substract C from B and put the
fixing bracket (2) in place using this
measurement for vertical position
and place to the centre for horizontal
position. Secure the fixing bracket (2)
using screws(1).
Fig. 11 - Fitting the decor door
Place the decor door onto the appliance
door by inserting adjustment bolts into
the slots on the fixing bracket. Locate
the washers and screw the nuts onto the
adjustment bolts.
g. 9
g. 10
C
B
15
g. 14
Installation
Fig. 12 - Aligning the decor door
Close the door and check the alignment
with the other unit doors. Adjust the
decor door by screwing or unscrewing
the adjustment bolts for vertical
adjustment and by the help of the slots
on the fixing bracket for other directions.
Lock the screws into place as shown in
10.2.
Fig. 13 - Fitting the decor door base
fixings
With the appliance door open, remove
the screws at the bottom of the
appliance door. Locate the decor door
base fixings (3) and screw the fixings to
the appliance door and the decor door.
Fig. 14 - Fitting the decorative cover
Fit the decorative cover (4) on the decor
door fixing bracket.
g. 12
g. 13
10
10
8
1
3
4
16
Installation
Fig. 17 - Fitting the plinth
Fit the plinth section, providing minimum
25 mm gap between the cabinet door
and fix it.
Never cover over the ventilation slots.
Once installed the plinth must not block
the ventilation slots in the appliance.
This may require cutting the plinth down.
Failure to ensure adequate ventilation
may invalidate the warranty.
g. 17
min
25mm
17
Electrical Information
Warning! This appliance must be earthed.
The mains lead of this appliance has been fitted with a BS 1363A
13 amp fused plug. To change a fuse in this type of plug, follow the
steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the
fuse cover.
3. Replace fuse cover.
Important: Do not use the appliance without the fuse cover in
position.
How to connect an alternative plug
If the fitted plug is not suitable for your socket outlet, then it should
be cut o and disposed of safely to prevent the risk of electric shock.
A suitable alternative plug of at least 13 Amp rating to BS 1363 should
be used.
18
As the colours of the wires in the mains lead of this appliance may
not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:-
The wire which is coloured GREEN and YELLOW must be
connected to the terminal which is marked with letter (E) or by the
Earth symbol or coloured GREEN and YELLOW.
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter (N) or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter (L) or coloured RED.
If in doubt regarding the electrical connection of this appliance,
consult a qualified electrician. Do not shorten the supply cable, the
appliance may require removing for servicing.
N.B. Ensure that the plug socket is situated in an easily accessible
place.
If the power supply cord is damaged, it must replaced by a CDA
authorised agent.
19
E & O E. All instructions, dimensions and illustrations are provided for guidance only. CDA reserve the
right to change specifications without prior notice.
20
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T: 01949 862 012 F: 01949 862 003 E: service@cda.eu W: www.cda.eu
Passionate about style
To contact our Customer Care Department, or for Service,
please contact us on the details below.
Serviced by
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Matrix MFU800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Matrix MFU800 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info