785585
7
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
OPERATION
EN / GMDSS Mass Charger Alarm Interface / January 2013 / Copyright © 2013 Mastervolt 7
3.3.1 Main Menu
The Main Menu offers a quick status overview of the
battery system and battery charger. It is immediately
accessible by pressing the Select button shortly. None of
the displayed information can be modified at this menu.
There are two modes to display the measured parameters
at the Main Menu:
Standard menu. If this mode is chosen, all below
mentioned screens will be shown, except the screen
marked with *. (Install menu, F2 = OFF)
Short menu. If this mode is chosen, the screens which
are marked with ** will not be shown. (Install menu, F2
= ON)
The desired mode can be selected at the Install menu,
function F2 (see section 3.3.2).
If the GMDSS Interface is adjusted to the
Standard menu, and function F1: Scroll main
menu is set to ON, scrolling through the Main
Menu is done automatically. If the function F1:
Scroll main menu is set to OFF, you can scroll
through the Main Menu by touching the Select
button shortly.
Status charger
Shows the model of the connected
Mass series battery charger and the
actual charge stage of the Three
Stage Charge algorithm.
Voltage and charge current*
Shows the actual battery voltage
(Volt) and the charge current (Amps).
Charge current**
Shows the actual charge current (%)
as percentage of the nominal charge
current.
Battery voltage **
Shows the actual battery voltage
(Volt).
Battery current**
Shows the actual charge current
(Amps).
3.3.2 Install menu
The Install menu is used to adjust the GMDSS-Interface
in accordance with the electrical installation.
To enter the Install Menu, hold the Select button pressed
for at least 1 second.
To leave the Install Menu wait 20 seconds or scroll to
RETURN and hold the Select button pressed until you
return to the Main Menu.
Touch the Select button shortly to scroll
through the functions as described below.
If a value can be adjusted, the display shows
an arrow. When the arrow is pointing
downwards (È) the displayed value can be
decreased by pressing the Mute button
shortly. If the arrow is pointing upwards (Ç)
the value can be increased.
To change the direction of this arrow, hold the
Select button pressed until the pointing
direction of the arrow changes.
To protect the GMDSS-Interface against
unintended adjustment of set points, the Lock
all settings function is activated every time
you enter the Install menu. When activated
(“ON”), the settings mentioned in this chapter
cannot be changed. See F0 Lock all settings
to unlock.
F0: Lock all settings
To unlock the settings of the GMDSS Interface, hold the
Select button pressed until this function switches to OFF.
Factory setting: ON
Adjustable range: ON/OFF
F1: Scroll main menu
If this function is set to ON, scrolling through the Main
Menu is done automatically. If set to OFF, you can scroll
through the Main Menu manually by touching the Select
button.
Factory setting: ON
Adjustable range: ON/OFF
F2: Main menu short
If this function is set to OFF, all screens mentioned in
section 3.3.1 will be shown, except screen marked with *.
If set to ON, screens marked with ** will not be shown.
Factory setting: OFF
Adjustable range: ON/OFF
M 24/25
Bulk
26.4V
024.0A
CHG CUR.
089%
BAT VOLT
26.4V
BAT CUR.
024.0A
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mastervolt GMDSS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mastervolt GMDSS in de taal/talen: Engels als bijlage per email.

De handleiding is 0.68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info