MT-1950
3
ENG USER MANUAL
IMPORTANT SAFEGUARDS
This User Manual contains information on the use and care of this product. Please read this user manual carefully before using this device and save it for future reference.
• Before the first use, check the device specifications and the power supply in your network.
• Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
• For indoor use only.
• Do not use with a damaged cord, plug or other damages.
• Keep the power cord away from sharp edges and/or hot surfaces.
• Do not pull the cord, always pull the plug. Do not reel the cord around the device housing.
• Never attempt to dissemble and/or repair the item by yourself. If you encounter any problems, please contact the nearest customer service centre.
• Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.
• Always unplug the item and let it cool down before cleaning and/or removing parts. Keep unplugged when not in use.
• To avoid electric shock and/or fire, do not submerge in water or other liquids. If this occurs, immediately unplug the device and contact a service centre for inspection.
• This appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental capabilities. Neither for persons with a lack of experience and/or knowledge,
unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• This product uses circulated heated air to dry the products, make sure that there are no products in the base unit and that the air in and outlets are not blocked. This will have a direct result on
the drying of the product and might also endanger the device.
• Do not move the device while in operation, also do not cover the ventilator while in operation.
• The maximum continuous operation time for this device is 36 hours, after this period turn the device off and let it cool down for at least 2 hours.
• This device should be placed on top of a heat resistant surface.
BEFORE FIRST USE
• Wash the drying trays and the lid in warm soapy water.
• Clean the ventilator/heating unit with a damp cloth and wipe dry.
• Dry all parts thoroughly after cleaning.