INTRO SCAN PLAY
EQ SELECTION
PROGRAM BUTTON
Press INTRO button once in play mode to activate
introscan playback immediately; the player play the first 10
seconds of each track in a sequential order from the first
track. You may press this button once again to exit
introscan play mode and return to normal playback from the
track it's arrived at.
Press EQ button on the remote or press and hold EQ
button on the unit continuously during disc playback mode
to select EQ sound effects among ROCK, POP, CLASSIC,
JAZZ and FLAT.
To program tracks, follow the steps below:
1. Press PROGRAM/MEM/TIME Button on the main unit or
press PROGRAM/MEM button on the remote in
CD/MP3/WMA Stop mode.
2. Press SKIP/SEARCH buttons to select tracks during
CD/MP3/WMA program mode.
3. Press the PROGRAM/MEM/TIME Button on the main
unit or press PROGRAM/MEM button on the remote to
save this track to memory and step into the next
programming step.
4. Repeat the processes specified above to go on with the
programming.
5. After programming is finished, press the PLAY/PAUSE
button to enter Program Playback.
6. A total of 20 tracks can be programmed for CD, and 99
tracks for MP3/WMA. You may press STOP button to
terminate programmed playback. In program stop mode,
press STOP button again to clear the programming.
DIGITAL TUNER OPERATION
To store the current radio station, follow the steps
below:
Press FUNCTION button to enter Tuner mode.
Press TUNING/SKIP button on the main unit or
SKIP/SEARCH&TUNING&TIME/ALARM ADJUST
FORWARD or BACKWARD buttons to Manually tune the
frequency.
Press and hold SKIP/SEARCH&TUNING&TIME/ALARM
ADJUST buttons or TUNING/SKIP button for 2 seconds to
automatically tune the radio frequency. When the tuning
goes to one station available, broadcasting starts
immediately.
1. Press TUNING BACKWARD or FORWARD button to
select your desired frequency first.
2. Press PROG/MEM/TIME button on the main unit or
PROG/MEM button on the remote.
3. Then press M+ or M- button to select a memory position.
4. Then press PROG/MEM/TIME button on the main unit or
PROG/MEM button on the remote again to store the
frequency.
5. Repeat the processes specified above to go on with the
storing.
6. To recall the preset station frequency, press the M+/M-
buttons. A total 10 stations can be stored in Memory for
FM.
5