WIRELESS SMOKE DETECTOR SD90 USER MANUAL
For use with Marmitek security systems of the types:
• SafeGuard
• TotalGuard
• HomeGuard MS8000
• Security System MS9470, MS9770, MS9970
• Security System Protector 28
• Home Automation Controller SC2200, SC2700, SC2800, SC9000
Please read these instructions carefully and completely before initial activation; they contain
information for the correct installation of this wireless smoke alarm.
SAFETY WARNINGS
• The SD90 smoke detector is designed specifically for localised home use. If smoke is detected, the
appliance will sound a piercing alarm. Make sure the smoke detector is installed in such a way that the
built-in siren will be heard by residents even when they are asleep. If necessary, install several smoke
detectors. For additional functionality, you can also use the smoke detector in combination with
Marmitek security systems. In this way, you can receive a telephone warning when the smoke detector
gives an alarm. Attention: the operation of this additional function is not included in the
manufacturer's liability.
• Do not use cleaning products on the smoke detector. Keep it clean with a dry or slightly moistened cloth.
• This product is not a toy. Keep out of reach of children.
• Check the detector every week to make sure it is in proper working order.
• To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose
the components to rain or moisture. Do not use the product close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright light sources.
• The product should only be repaired or serviced by a qualified repairman.
• In case of improper usage or if you have opened, altered and repaired the product yourself, all
guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the
product or when the product is used for purposes other than specified. Marmitek does not accept
responsibility for additional damage other than covered by the legal product responsibility.
• Batteries: keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never use
old and new batteries or different types of batteries together. Remove the batteries when you are not
using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting
them in the product. Wrong positioning can cause an explosion.
TABLE OF CONTENTS
1. General information and function 4
2. Application 4
3. Registering the smoke detector with the SC9000 base station of the SafeGuard / TotalGuard 4
4. Registering the smoke detector with the base stations of the types MS9470, MS9770, MS9970,
SC2200, SC2700, SC2800, Protector 28 4
5. Registering the smoke detector with the base station of the type Homeguard MS8000 4
6. Positioning 5
7. Installation 5
8. What happens when the alarm goes off? 6
9. Changing the battery 6
10. Reset to the factory settings 6
3SD90
TM
ENGLISH
