494328
7
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
37
A
Fitting to a distribution box.
38
Connecting the power cord for use in a wall socket
If you wish to connect the RFIX35 to a wall socket, you must
connect the power cord provided.
To connect the power cord to the RFIX35, follow the steps
below.
Remove the cover of the RFIX35 by loosening the screw
at the top.
Use a Stanley knife to carefully cut open the recess on the
narrow side of the mounting plate so that the power cord
can be fed through.
Fit live and neutral to the connector and feed the cable
through the cable channel in the mounting plate.
Firmly tighten the cover of the RFIX35 to the mounting
plate again.
Assembly
(cont'd.)
39
Connecting of the power cord.
40
Standard or RF-secured mode
The RFIX35 can operate in
RF-secured mode
or standard mode (default).
Remote control RFIX35
Standard mode
RF-secured mode
Standard mode
RF-secured mode
41
Standard mode
In the standard mode the RFIX35 is compatible with existing
remote controls. In this mode the user must press separately
the address number and the command on the remote control.
The RFIX35 will receive the RF signals from the remote control
(an address with a command) and transmit it over the power
line to activate actuators or start macros.
RF-secured mode
In the RF-secured mode only commands from linked remote
controls will be accepted. Commands from other remote
controls within the receiving reach of the RFIX35 will be
ignored. To be able to use the RF-secured mode you will need
a remote control containing RF-security code. Up to 8 different
remote controls can be linked. Remote controls that are suitable
for RF-secured are the Marmitek X-10 ABX1 and the ABX3.
42
Receiving modes
Note: The default setting of the RFIX35 is letter
code "A" in the standard mode. In this mode, the
RFIX35 will accept commands on the same letter
code from other remote controls that are within
the range of the RFIX35. If you select letter code
"P" in the standard mode, the RFIX35 will also
accept commands from the other letter codes
within the range. As a result, third parties can
operate your lighting and equipment connected to
Marmitek X-10 Home. If you want to avoid this,
you must program the remote controls to the RF-
secured mode.
!
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marmitek RFIX35 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marmitek RFIX35 in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info