6 © MARMITEK
No proper 3D picture
• You should point the remote control at the external infrared receiver, not at the switcher.
• Infrared signals have a maximum reach of approximately 10 metres. Try a shorter distance.
• Replace the battery in the remote control, it could be empty.
Remote control does not work
• Check whether the HDMI source has been set to 3D and/or that this is set to automatic.
• Both the HDMI source as well as the HD screen must support the same 3D formats.
• Check whether the proper 3D picture is reproduced by directly connecting the HDMI source
to the screen with an HDMI cable.
Do you still have questions? Please check out www.marmitek.com for more information.
TECHNICAL DATA
Resolution
Supported HDTV Resolutions 480p, 576i, 576p, 720p, 1080i, 1080p
Supported 3D formats 1080p@23.98/24Hz, 720p@59.94/60/50Hz
Supported PC Resolution (max) 1920 x 1200
Maximal Pixel Frequency (max) 225 MHz
Maximal Bit Rate (max) 2.25 Gbps
In- and outputs
HDMI Input (19-pin female) 3 HDMI
HDMI Output (19-pin female) 1 HDMI
Maximal HDMI cable length 15 metres
Remote control
Infrared remote control Battery included CR2025
Housing Switcher
Dimensions (H x W x D) 80 x 18 x 58mm
Weight 250 g
Ambient
Ambient temperature +0 to +40° C
Ambient humidity 10% to 85%
Power
External power adaptor Input: 100-240VAC @50-60Hz Output: 5VDC @ 300mA
Specifications may be modified without prior notice.
