553255
1
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
2
caseback time setting
time setting
1. push button to move hands.
2. set to correct time.
english
date models
date setting
1. pull the crown out to position 2.
2. turn the crown either clockwise or counter-clockwise and set the date for the
previous day. the direction that moves the date varies on different watch models.
time setting
1. pull the crown out to position 3.
2. turn crown to advance the time and continue until the day/date changes to the
present day.
3. set to the correct time.
4. push crown back to position 1.
321
date
front
pusher
button
for time
adjustment
back
3
chronograph with date fs20
(1 crown/2 pushers)
time setting
1. pull crown out to position 3. chronograph second hand will return to zero position.
do not return the crown to its normal position while the hands are returning to zero,
or else the position the hands are at when this is done will be recognized as the new
zero position.
2. turn to set hour, minute and 24 hour hands.
3. return crown to position 1.
date setting
1. pull crown out to position 2.
2. turn clockwise to set the date.
3. return crown to position 1.
chronograph operation
1. push a to start/stop the chronograph.
2. push b to reset the chronograph.
chronograph zero reset
1. pull crown out to position 3.
2. press a to set the chronograph second hand to 12:00 (zero) position. each press
advances the chronograph second hand one mark. if a is held down for over 2 seconds,
the chronograph second hand advances continuously.
3. return crown to position 1.
321
a
b
chronograph
second hand
chronograph
minute hand
24-hour hand
date
second hand
4
chronograph stopwatch vd53b
(1 crown/2 pushers)
time and date setting
1. before setting the time, make sure the chronograph is stopped and set to zero
(12:00) position.
2. pull crown out to position 2.
3. turn crown clockwise until the previous day’s date is displayed.
4. pull crown out to position 3 when the second hand is at the 12:00 position.
5. turn crown to set time.
note: 24-hour hand moves correspondingly with the hour and minute hands. when setting
the time be sure to check that the 24-hour hand is set properly.
6. return crown to position 1.
note: when the crown is in position 2, do not press the pushers. otherwise the
chronograph hands will move.
chronograph
1. press a to start/stop the chronograph.
2. press b to reset to zero.
split time
1. press b while the chronograph is running.
2. press b again to return to the chronograph.
3. press a to finalize timing.
4. press b to reset.
chronograph zero reset
1. if either of the chronograph hands is not at the zero (12:00) position, pull crown out to
position 3.
2. press a to move hands clockwise; press b to move hands counter-clockwise.
3. return crown to position 1.
321
a
b
24-hour hand
minute hand
second hand
5
big date chronograph 5040.b
(1 crown/2 pushers)
time setting
1. pull the crown out to position 3.
2. turn the crown to set the desired time.
3. push crown back to position 1.
date setting
1. pull the crown out to position 2.
2. turn the crown until the correct date is shown in the
date window.
3. push the crown back to position 1.
chronograph zero reset
1. pull the crown out to position 3.
2. press a and b simultaneously for at least 2 seconds. the center stop second hand
rotates 360 degrees.
3. push crown back to position 1.
chronograph operation
1. press a to start the chronograph.
2. press a to stop the timing.
3. press b to reset. the three chronograph hands will return to their zero positions.
date
second hand
minute hand
hour hand
center stop-second
minute counter
1/10 second counter
(hour counter after 30 minutes)
push button a
crown
push button b
6
digital fl133
time and date setting
1. press b three times in the time/calendar mode to enter into the time setting mode. second
will start flashing.
2. press c to adjust seconds to “00”.
3. press d to next setting item. setting sequence will be cycled by second, minute, hour,
date, month and day of week.
4. press c to adjust the flashing digit.
5. press b to return to the normal time mode.
alarm setting
1. in the time/calendar mode, press b twice to switch to alarm mode. hour will start
flashing.
2. press d to select next setting item. minute will be set and flashing.
3. press c to adjust flashing digit.
4. press b to return to the normal time mode from alarm setting mode.
alarm on/off and sound
1. hold c and depress d button at normal time mode to switch alarm on/off.
2. the alarm will sound for 30 seconds and can be stopped by pressing the c or d.
chime on/off
hold c and depress the b button to set chime on/off in normal time mode.
using the chronograph
1. press c to start/stop measurement.
2. press d to reset the chronograph.
3. press d to measure a split time while the chronograph is timing.
4. press d to return the display to the chronograph measurement.
5. press d to finalize the split time display with the chronograph in the split stop state.
6. press d to reset the chronograph.
A
C
B D
7
digital fdt0013
normal time display
12-hour format.
press a once to show date.
press a twice to show second.
press a again to return to normal time display.
normal time setting
press b to select the setting digit, and press a for increment of the blinking digit.
the setting sequence of b will be in the following sequence:
- 1st press: display the date
- 2nd press: set the month
- 3rd press: set the day
- 4th press: set the hour
- 5th press: set the minute
- the next depressing of the b-switch will return to normal display mode.
A
B
digital fl137d
normal time display
12-hour format
press a once to show date.
press a twice to show second.
press a again to return to normal time display.
12/24-hour display
in normal time display press b once to switch format.
press b again to return to original format.
time and date setting
press and hold b to enter setting mode, and press a for increment of the blinking digit.
the setting sequence of b will be in the following sequence:
- 1st press: display the year
- 2nd press: display the month
- 3rd press: display the day
- 4th press: display the hour
- 5th press: display the minute
- the next depressing of the b-switch will return to normal display mode.
A
B
8
led digital
time and date mode
1. press a to view time.
note: animation will be displayed for 2 seconds before time is shown.
2. with time shown, press a to view date.
time setting
1. press a to view time.
2. with time shown, press and hold b for 2 seconds.
3. press a to select 12 or 24 hour format.
4. press b for next setting field.
5. press a to set value.
6. repeat steps 4 and 5 until desired time is reached.
7. press b to exit time setting mode.
date setting mode
1. press a to view time. with time shown, press a again to view date mode.
2. with time shown, press and hold b for 2 seconds.
3. press a to set value.
4. press b for next setting field.
5. repeat steps 3 and 4 until desired time is reached.
6. press b to exit date setting mode.
A
B
mode
set
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marc Jacobs FS20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marc Jacobs FS20 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info