VIDEO OUTPUT SELECT switch
TV or monitor with
audio/video inputs
S-video cable (Not supplied)
To
S-VIDEO
OUT
To S-video input
To 21-pin SCART
terminal of TV set
21-pin
SCART
socket
Video Cassette
Recorder
AV1
AV2
To AUDIO OUT (L/R)/
VIDEO OUT
Audio/Video cable
(Supplied)
To video input
To audio inputs
To A/V EUROCONNECTOR (AUX)
To A/V
EUROCONNECTOR
(TV)
To 21-pin SCART
socket
21-pin SCART Cable
(Not supplied)
❍
Refer to the owner’s manual of your TV as well.
❍
Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
❍
Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted
because DVD video discs are copy protected.
❍
In case of the TV set corresponding to RGB signal, the RGB signal is automatically selected in the TV (Only when the
“VIDEO OUTPUT Switch” is set to “RGB” on the Rear Panel).
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this
DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well
as the speakers (Refer to “Selecting Digital Audio Output” on page 37).
Notes
If the TV has an S-video input, connect
the DVD player with the S-video cable.
When using A/V EUROCONNECTOR (TV)’s
RGB signal, set the VIDEO OUTPUT switch to
RGB or when using S-VIDEO OUT jack, set the
VIDEO OUTPUT switch to S-VIDEO.
