453865

Marantz UD5005 Handleiding

65
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
LICENSE
3
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
0. This License Agreement applies to any software library
or other program which contains a notice placed by
the copyright holder or other authorized party saying
it may be distributed under the terms of this Lesser
General Public License (also called “this License”).
Each licensee is addressed as “you”.
A “library” means a collection of software functions
and/or data prepared so as to be conveniently linked
with application programs (which use some of those
functions and data) to form executables.
The “Library”, below, refers to any such software
library or work which has been distributed under these
terms. A “work based on the Library” means either
the Library or any derivative work under copyright
law: that is to say, a work containing the Library or a
portion of it, either verbatim or with modications and/
or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation
in the term “modication”.)
“Source code” for a work means the preferred form of
the work for making modications to it. For a library,
complete source code means all the source code for
all modules it contains, plus any associated interface
denition les, plus the scripts used to control
compilation and installation of the library.
Activities other than copying, distribution and
modication are not covered by this License; they are
outside its scope. The act of running a program using
the Library is not restricted, and output from such a
program is covered only if its contents constitute a
work based on the Library (independent of the use
of the Library in a tool for writing it). Whether that is
true depends on what the Library does and what the
program that uses the Library does.
1. You may copy and distribute verbatim copies of the
Library’s complete source code as you receive it, in
any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to
the absence of any warranty; and distribute a copy of
this License along with the Library.
You may charge a fee for the physical act of transferring
a copy, and you may at your option offer warranty
protection in exchange for a fee.
2. You may modify your copy or copies of the Library or
any portion of it, thus forming a work based on the
Library, and copy and distribute such modications
or work under the terms of Section 1 above, provided
that you also meet all of these conditions:
a) The modied work must itself be a software library.
b) You must cause the les modied to carry prominent
notices stating that you changed the les and the
date of any change.
c) You must cause the whole of the work to be
licensed at no charge to all third parties under the
terms of this License.
d) If a facility in the modied Library refers to a function
or a table of data to be supplied by an application
program that uses the facility, other than as an
argument passed when the facility is invoked, then
you must make a good faith effort to ensure that,
in the event an application does not supply such function
or table, the facility still operates, and performs whatever
part of its purpose remains meaningful.
(For example, a function in a library to compute
square roots has a purpose that is entirely well-
dened independent of the application. Therefore,
Subsection 2d requires that any application-
supplied function or table used by this function
must be optional: if the application does not supply
it, the square root function must still compute
square roots.)
These requirements apply to the modied work
as a whole. If identiable sections of that work are
not derived from the Library, and can be reasonably
considered independent and separate works in
themselves, then this License, and its terms, do not
apply to those sections when you distribute them as
separate works. But when you distribute the same
sections as part of a whole which is a work based on
the Library, the distribution of the whole must be on
the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each
and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights
or contest your rights to work written entirely by you;
rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on
the Library.
In addition, mere aggregation of another work not
based on the Library with the Library (or with a work
based on the Library) on a volume of a storage or
distribution medium does not bring the other work
under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU
General Public License instead of this License to a
given copy of the Library. To do this, you must alter all
the notices that refer to this License, so that they refer
to the ordinary GNU General Public License, version
2, instead of to this License. (If a newer version than
version 2 of the ordinary GNU General Public License
has appeared, then you can specify that version
instead if you wish.) Do not make any other change in
these notices.
Once this change is made in a given copy, it is
irreversible for that copy, so the ordinary GNU General
Public License applies to all subsequent copies and
derivative works made from that copy.
This option is useful when you wish to copy part of the
code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion
or derivative of it, under Section 2) in object code or
executable form under the terms of Sections 1 and
2 above provided that you accompany it with the
complete corresponding machine-readable source
code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used
for software interchange.
If distribution of object code is made by offering
access to copy from a designated place, then offering
equivalent access to copy the source code from the
same place satises the requirement to distribute
the source code, even though third parties are not
compelled to copy the source along with the object
code.
5. A program that contains no derivative of any portion
of the Library, but is designed to work with the Library
by being compiled or linked with it, is called a “work
that uses the Library”. Such a work, in isolation, is
not a derivative work of the Library, and therefore falls
outside the scope of this License.
However, linking a “work that uses the Library” with
the Library creates an executable that is a derivative
of the Library (because it contains portions of the
Library), rather than a “work that uses the library”. The
executable is therefore covered by this License.
Section 6 states terms for distribution of such
executables.
When a “work that uses the Library” uses material
from a header le that is part of the Library, the object
code for the work may be a derivative work of the
Library even though the source code is not.
Whether this is true is especially signicant if the work
can be linked without the Library, or if the work is
itself a library. The threshold for this to be true is not
precisely dened by law.
If such an object le uses only numerical parameters,
data structure layouts and accessors, and small
macros and small inline functions (ten lines or less in
length), then the use of the object le is unrestricted,
regardless of whether it is legally a derivative work.
(Executables containing this object code plus portions
of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you
may distribute the object code for the work under the
terms of Section 6. Any executables containing that
work also fall under Section 6, whether or not they are
linked directly with the Library itself.
6. As an exception to the Sections above, you may also
combine or link a “work that uses the Library” with the
Library to produce a work containing portions of the
Library, and distribute that work under terms of your
choice, provided that the terms permit modication
of the work for the customer’s own use and reverse
engineering for debugging such modications.
You must give prominent notice with each copy of
the work that the Library is used in it and that the
Library and its use are covered by this License. You
must supply a copy of this License. If the work during
execution displays copyright notices, you must include
the copyright notice for the Library among them, as
well as a reference directing the user to the copy of
this License. Also, you must do one of these things:
a) Accompany the work with the complete
corresponding machine-readable source code
for the Library including whatever changes were
used in the work (which must be distributed
under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the
complete machine-readable “work that uses the
Library”, as object code and/or source code, so
that the user can modify the Library and then relink
to produce a modied executable containing the
modied Library. (It is understood that the user
who changes the contents of denitions les in the
Library will not necessarily be able to recompile the
application to use the modied denitions.)
b) Use a suitable shared library mechanism for linking
with the Library. A suitable mechanism is one that
(1) uses at run time a copy of the library already
present on the user’s computer system, rather than
copying library functions into the executable, and
(2) will operate properly with a modied version of
the library, if the user installs one, as long as the
modied version is interface-compatible with the
version that the work was made with.
c) Accompany the work with a written offer, valid
for at least three years, to give the same user the
materials specied in Subsection 6a, above, for a
charge no more than the cost of performing this
distribution.
d) If distribution of the work is made by offering access
to copy from a designated place, offer equivalent
access to copy the above specied materials from
the same place.
e) Verify that the user has already received a copy of
these materials or that you have already sent this
user a copy.
For an executable, the required form of the “work that
uses the Library” must include any data and utility
programs needed for reproducing the executable
from it. However, as a special exception, the materials
to be distributed need not include anything that is
normally distributed (in either source or binary form)
with the major components (compiler, kernel, and so
on) of the operating system on which the executable
runs, unless that component itself accompanies the
executable.
It may happen that this requirement contradicts the
license restrictions of other proprietary libraries that
do not normally accompany the operating system.
Such a contradiction means you cannot use both them
and the Library together in an executable that you
distribute.
7. You may place library facilities that are a work based
on the Library side-by-side in a single library together
with other library facilities not covered by this License,
and distribute such a combined library, provided that
the separate distribution of the work based on the
Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the
same work based on the Library, uncombined with
any other library facilities. This must be distributed
under the terms of the Sections above.
b) Give prominent notice with the combined library of
the fact that part of it is a work based on the Library,
and explaining where to nd the accompanying
uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or
distribute the Library except as expressly provided
under this License. Any attempt otherwise to copy,
modify, sublicense, link with, or distribute the Library is
void, and will automatically terminate your rights under
this License. However, parties who have received
copies, or rights, from you under this License will not
have their licenses terminated so long as such parties
remain in full compliance.
… 65 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Marantz-UD5005

Zoeken resetten

  • Het lampje van fl off blijft knipperen en krijg de speler niet meer aan. Gesteld op 10-11-2021 om 13:06

    Reageer op deze vraag Misbruik melden

  • Ik heb het volgende probleem de cd lade gaat niet meer open van de Marantz UD 5005? Gesteld op 12-11-2015 om 12:44

    Reageer op deze vraag Misbruik melden

    • Ik heb sinds kort hetzelfde probleem met hetzelfde apparaat. Op het moment dat ik op de 'open' knop druk, hoor ik wel de motor draaien die de la moet openen, maar er gebeurt niets. Als ik licht aan de la trek, lijkt het stevig vast te zitten. Het vreemde is, dat ik ook niets hoor ratelen, een geluid dat je zou verwachten als de motor wel draait, maar niet kan inhaken op de tanden van de la zelf. Het lijkt of de motor gezakt is, bijzonder, want het apparaat is niet van zijn plek geweest. Is er iemand die al een oplossing heeft gevonden? Geantwoord op 23-9-2016 om 20:03

      Waardeer dit antwoord (55) Misbruik melden

    • Is het probleem opgelost ? Ik heb namelijk hetzelfde probleem. Als ik een klein tikje op de bovenkant geef gaat ie wel open.... Geantwoord op 11-12-2016 om 10:04

      Waardeer dit antwoord (19) Misbruik melden

    • Altijd een DVD in laten zitten ( ik gebruik test DVD ) . . .
      Als lade no vast zit : aanzichtkaart ( briefkaart met foto ) voorzichtig aan bovenzijde in de gleuf duwen.
      Klaarblijkelijk "denkt" de senzor dat er een CD/DVD in ligt en lae gaat weer open.
      Niet vergeten daarna altijd een CD/DVD erin te laten zitten . . . Geantwoord op 5-12-2022 om 14:59

      Waardeer dit antwoord (4) Misbruik melden

    • Heb de speler open gemaakt. Het blijkt dat de CD magnetisch wordt geklemd tussen de het draai/uitlees apparaat en de cd lade. Dit draai/uitlees apparaat moet iets zakken als de lade wordt geopend maar de kracht van de magneet verhinderd dit. Ik weet niet of dit magneetveld uit zou moeten schakelen bij het openen van de lade. Dan zou het aan de elctronica liggen.
      Een cd in de lade laten zitten is inderdaad een oplossing. Geantwoord op 8-12-2023 om 11:52

      Waardeer dit antwoord (2) Misbruik melden

  • al enige tijd knippert een rood lichtje met FL-off eronder. Daardoor kan ik niets meer doen, hij gaat niet meer aan of uit.
    Iemand tips wat dit is en hoe het op te lossen? Gesteld op 10-5-2014 om 16:38

    Reageer op deze vraag Misbruik melden

    • Here is the solution. This is a common problem with this player. Common DVP 642 problem (only problem with a great player): They die, and you have a blinking red power button. This is actually surprisingly easy to fix. It's really easier than I make it look, but I'm just being really clear in case anyone reading this has never seen a soldering iron before. Here are the steps I did (and note that, if you're still under warranty, this will void your warranty). The decision to try this is up to your own discretion and may be a last ditch effort before throwing the player away. Short version: Check the board to see if capacitor C316 is bulging. If so, get a 1000u capacitor >=16V and replace it. Long version: 1. Unplug everything 2. Unscrew the side and rear screws to remove the top cover. 3. On the board where the power cable goes in, look for a capacitor (looks like a little drum with a '+' on the top) that is bulging upward either a little or a lot. It may be leaking some brown fluid as well. 4. I'm betting that the writing on the board at this location says 'C316'. If you google 'dvp642' and 'c316', you'll get hundreds of hits... 5. If that's the case, you'll need to find a capacitor and a soldering iron. Visit radio shack or similar electronics place and buy an elecrolytic capacitor that says 1000u (the 'u' is actually a lower case greek 'mu') with a voltage greater than or equal to 16v (this is not calculated: it's simply what others have reported success with. I couldn't find one and used a 35V one instead). You should be able to find one that looks somewhat similar to the damaged one (it might be a little bigger or smaller, but you'll want the same basic shape). This should cost less than $2. 6. Borrow or buy a cheap soldering iron and some solder. I borrowed one from a friend at work...this is NOT my area of expertise, so don't worry about the difficulty! 7. Now the tricky part: back on your DVD player, you need to get that board out. Unplug the two cables connecting to the board we're working on, unscrew the screws holding it down, and, using some pliers, hold down the wings of the little plastic piece that is still holding the board down and slide the board up. I flipped this around to get at the bottom while leaving the power cord in place. 8. Heat up the soldering iron. Locate the spot on the bottom of the board where the C316 capacitor is attached. Remove your new capacitor from the package. There should be one shorter leg which is the negative side. It will likely be marked this way as well. 9. One side of the capacitor should have a ' -' on it. Note which side this is. You may not be able to see it until it is removed, so be aware of needing to know this as you remove it. 10. After it is warm enough to melt solder, lay the soldering iron across the joints you identified as belonging to C316. Tug gently on C316 as you do this and it should soon come free. This is a little tricky to hold the iron, the board, and the capacitor all at once, so please don't burn yourself! Again, note which side is negative and which hole it came from. This is the negative hole, and the other is positive. There will likely be some solder left over around each hole. Just try not to let it run between the two holes or you will short out the connection. 11. Grab your new capacitor and line up the longer leg with the positive hole. Lay the soldering iron against that hole on the other side and push the leg through. Line up the negative leg/hole and repeat. Lay the iron across both to heat up enough to push the capacitor legs through and the capacitor down to the board. 12. Check the connections for each leg. There should be a small mound of solder joining each leg to the metal of the board, but not running to any other point of the board. If it's run to some other points, you'll need to do some searching to see how to clean up it up a little bit as I'm not an expert at this. If you need a little more solder, lay the iron across the joint for a few seconds, then feed your solder into the hot spot until a small amount flows over the joint. Remove the iron, wait a moment, then remove the solder. Look at the other solder joints on the board for a rough idea of how it should look. 13. Use some wire cutters to trim the legs down to the solder. 14. Pop the board back over the plastic piece and reconnect the cables. 15. At this point, you're on your own. Personally, I made sure I wasn't touching any metal and plugged it in. Since I didn't blow any fuses and the player seemed to work, I unplugged it, reassembled it, and went to watch a movie. Geantwoord op 29-11-2015 om 00:54

      Waardeer dit antwoord (7) Misbruik melden

  • Mijn afstandsbediening gaat niet meer ik sta op BD2 hoe kan ik terug naar BD1
    ik heb gelezen de toets stop indrukken en ook toets 1 maar waar kan ik toets 1 vinden dat is mij niet duidelijk Gesteld op 15-2-2014 om 23:55

    Reageer op deze vraag Misbruik melden

    • Je moet hierbij de afstandbediening gebruiken, deze staat dan anders ingestelf dan je bluray speler
      In de handleiding staat dat je de stop knop en de toets met opschrift 1 gedurende minimaal 5 seconden ingedrukt moet houden.
      Wanneer de afstandbediening wordt bediend verschijnt er op het display van de Bluray speler bijvoorbeeld BD2. Dat betekend dat in dat geval de Bluray speler staat ingesteld op BD2. In dat geval moet je de afstandbediening ook instellen op BD2. Dus door minimaal 5 seconden op de afstandbediening de toetsen stop en 2 ingedrukt te houden.

      Succes ermee!

      Gr.,
      Luit R.
      Geantwoord op 30-9-2014 om 16:42

      Waardeer dit antwoord Misbruik melden

  • Ik heb in het systeem van mijn ud 5005 afstandbediening bd1 naar bd2 gezet nu werkt mijn afstandbediening niet meer hoe kan ik dit terug zetten op bd1? Gesteld op 24-8-2012 om 16:17

    Reageer op deze vraag Misbruik melden

    • Je moet hierbij de afstandbediening gebruiken, deze staat dan anders ingestelf dan je bluray speler
      In de handleiding staat dat je de stop knop en de toets met opschrift 1 gedurende minimaal 5 seconden ingedrukt moet houden.
      Wanneer de afstandbediening wordt bediend verschijnt er op het display van de Bluray speler bijvoorbeeld BD2. Dat betekend dat in dat geval de Bluray speler staat ingesteld op BD2. In dat geval moet je de afstandbediening ook instellen op BD2. Dus door minimaal 5 seconden op de afstandbediening de toetsen stop en 2 ingedrukt te houden.

      Succes ermee!

      Gr.,
      Luit R. Geantwoord op 30-9-2014 om 16:43

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz UD5005 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz UD5005 in de taal/talen: Nederlands als bijlage per email.

De handleiding is 14,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info