6614
65
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
63
ENGLISH
ENGLISH
TROUBLESHOOTING
In case of trouble, check the following before calling for service:
1. Are the connections made properly?
2. Are you operating the unit properly following the users guide?
3. Are the power amplifiers and speaker working properly?
If the unit does not operate properly, check items shown in the following table.
If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the
internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest
Marantz authorized dealer or the Marantz Service Center in your country.
CAUSE
The power plug is not connected.
Mute is on.
The input cable is not connected
correctly.
The master volume control is turned all
the way down.
The function selector position is wrong.
The headphones are connected to the
headphone jack.
The input cable is connected incorrectly.
The speaker cable is connected incorrectly.
The center speaker cable connection is
incomplete.
STEREO has been selected for the
Surround mode.
Center = NONE has been selected in
SETUP mode.
The surround speaker cable connection
is incomplete.
STEREO has been selected for the
Surround mode.
Surround = NONE has been selected in
the SETUP mode.
The surround back speaker cable
connection is incomplete.
The surround mode is not EX/ES mode.
Surround back = NONE has been
selected in the SPEAKER SIZE menu.
SYMPTOM
The SR9600 cannot be turned on.
No sound and picture are
output even when power is on.
No speaker output.
Incorrect audio or video for
selected source.
Incorrect audio from a channel.
No audio is output from the
center channel speaker.
No audio is output from the
surround speakers.
No audio is output from the
surround back speakers.
REMEDY
Connect the power plug to the outlet.
Cancel mute using the remote control unit.
See the connection diagram and connect the
cables correctly.
Adjust the master volume.
Select the correct position.
Disconnect the headphones. (Speakers will not
output sound when headphones are connected.)
Connect the cable correctly by referring to the
connection diagram.
Connect the cable correctly by referring to the
connection diagram.
Connect the cable correctly.
When STEREO is selected for the Surround mode,
no sound will be output from the center speaker.
Set another Surround mode.
Make the correct setting.
Connect the cable correctly.
When STEREO has been selected for the
Surround mode, no sound will be output from the
surround speaker. Set another Surround mode.
Make the correct setting.
Connect the cable correctly.
Set surround mode EX/ES.
Make the correct setting.
Note:
After PROTECT appears on the units display, the standby indicator may start flashing. If it does, there is a
problem in the unit or the connection. If this problem reoccurs even when power is activated from the remote
control unit, call for servicing.
SYMPTOM
Cannot select the EX/ES or
THX EX mode.
Cannot select THX ULTRA 2
CINEMA MUSIC, GAMES.
Cannot select the Neo:6
mode.
Ca not select the CS
II
mode.
No output to SUBWOOFER
OUT.
Noise is produced during DTS-
encoded CD or laserdisc play.
A specific channel does not
produce output.
AM or FM reception fails.
Noise is heard during AM
reception.
Noise is heard during FM
reception.
Cannot get programmed
station when the PRESET
button is pressed.
Control with the remote
control unit fails.
MRAC is not working.
CAUSE
Surround Back = NONE has been
selected in the SPEAKER SIZE menu.
The input signal is incompatible.
Surround Back = 1ch, NONE has been
selected in the
SPEAKER SIZE
menu
The input signal is incompatible.
The input signal is incompatible.
The input signal is incompatible.
Subwoofer = NONE has been selected
in the Setup mode.
Analog has been selected for input.
Nothing recorded on source.
Antenna connection is incomplete.
Reception is affected by other electrical
fields.
The radio waves from the broadcasting
station are weak.
Preset data has been erased.
Batteries are exhausted.
Remote control unit function key setting
is wrong.
The distance between the SR9600 and
the remote control unit is too far.
Something is blocking the SR9600 and
the remote control unit.
Headphones are connected.
REMEDY
Make the correct setting.
Use a 5.1channel source.
Make the correct setting.
Use a 5.1channel source.
Use a 2 channel Dolby Digital input signal, PCM
input signal or analog input signal.
Use a 2 channel Dolby Digital input signal, PCM
input signal or analog input signal.
Select Subwoofer = YES.
Be sure to perform digital connection, select digital
input, then play.
Check the encoded channel on the source side.
Correctly connect the indoor AM and FM antennas
to AM and FM antenna outlets.
Try changing the location where the AM indoor
antenna is set up.
Install an FM outdoor antenna.
Disconnecting power plug for long periods of time
will erase preset data. If this happens, input the
preset data again.
Replace all the batteries with new ones.
Select a different position from which equipment
will be controlled.
Move closer to the SR9600.
Remove the offending object.
Disconnect the headphones.
SR9600U DFU_01_ENG 4_4 05.4.27, 5:49 PMPage 63 Adobe PageMaker 6.5J/PPC
65

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz SR-9600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz SR-9600 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info