6608
26
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
ENGLISH
22
5 CS II (CIRCLE SURROUND II )
PARAMETER
1.
Select CS II in the SETUP MAIN MENU with
the
or cursor buttons, and press the
ENTER button.
2.
To Select desired contents as below, press
the or cursor buttons.
TRUBASS:
Set the TRUBASS level between 0 and 6 level in
1 level interval with the
or cursor buttons.
TRUBASS produced by the speakers are an
octave below the actual physical capabilities of
the speakers adding exciting, deeper bass
effects.
SRS DIALOG:
Set the SRS DIALOG level between 0 and 6 in 1
level intervals with the or cursor buttons.
This can be popped out of the surround audio
effects, allowing the listener to easily discern what
the actors say.
If NONE was selected for the Center speaker
setting, in the Speaker size set up menu, then this
setting will not appear.
After you complete this portion of the set up, move
cursor to MAIN with the or cursor buttons and
press the
ENTER
button.
4 PL II (PRO LOGIC II )
MUSIC PARAMETER
Pro Logic II-Music mode creates a rich and
enveloping surround ambience from stereo
sources such as CDs.
In this
mode, SR7500 includes three controls to
fine-tune the soundfield as follows.
Select PL II MUSIC in the SETUP MAIN MENU
with the
or cursor buttons, and press the
ENTER button.
PARAMETER:
Select DEFAULT or CUSTOM with the or
cursor buttons.
If you select CUSTOM, you can adjust three
parameters as listed below.
PANORAMA:
Select the Panorama mode On or Off with the
or cursor buttons.
Panorama wraps the sound of the front left and right
speakers around you, for an exciting perspective.
DIMENSION:
Set the Dimension level between 0 and 6 level in
1 level intervals with the or cursor buttons.
Adjust the soundfield either towards the front or
towards the rear.
This can be useful to help achieve a more
suitable balance from all the speakers with
certain recordings.
CENTER WIDTH:
Set the Center width level between 0 and 7 in 1
level intervals with the or cursor buttons.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the
center is mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend for the front image.
If NONE was selected for the Center speaker
setting, in the Speaker size set up menu, then
this setting will not appear.
After you complete this portion of the set up, move
cursor to MAIN with the or cursor buttons and
press the ENTER button.
4PL II MUS I C PARAMET ER
PARAMETER : DEFAULT
PANORAMA : OFF
DIMENSION : 4
CENTER WI DTH : 0
MA I N EX I T
3 PREFERENCE
1.
Select PREFERENCE in the SETUP MAIN
MENU with the
or cursor buttons, and
press the ENTER button.
2.
To select a desired content, press the or
cursor buttons.
STANDBY MODE:
When this function is set to ECONOMY, you
can reduce the power consumption when the
unit is in the standby mode.
Note:
TV-AUTO and RS-232C are disabled in the
ECONOMY setting.
TV AUTO:
Select the TV AUTO ON/OFF function to enable
or disable with the or cursor buttons. (refer
to page 29)
OSD Info:
Select the OSD information function to enable or
disable with the or cursor buttons.
If you select ENABLE, the SR7500 will display
the status of the feature (Volume up/down, input
select, etc..) on the TV monitor. But if you do not
desire this information, select DISABLE .
VIDEO CONVERT:
Select the VIDEO CONVERT function to enable
or disable with the or cursor buttons. (Video
cable connection: Refer to page 24)
LFE LEVEL:
Select the output level of the LFE signal included
in the Dolby Digital signal or the DTS signal.
Select 0 dB, -10 dB or OFF with the or
cursor buttons.
After you complete this portion of the set up, move
the cursor to MAIN with the or cursor buttons
and press the
ENTER
button.
3 PREFERENCE
STANDBY MODE : ECONOMY
TV-AUTO : DISABLE
OSD I NFO : ENABLE
VIDEO CONVERT : ENABLE
LFE LEVEL : 0 dB
MA I N EX I T
MIC SETUP ERROR (MIC SET ERROR)
The microphone (MC-10) is not properly
connected.
Check the microphone connection.
AMBI NOISE ERROR (AMBI NOISE ER)
Measurement cannot be done correctly
because of excessive ambient noise.
Either temporarily turn off power to noisy
devices such as air conditioning or move
them out of the room.
Retry measurement when the room is
quiet.
SPEAKER SET ERROR (SPK SET ERROR)
The speakers are not properly connected.
Recheck speaker layout and
connections.
5CSII PARAMETER
TRUBASS : 0
SRS D I ALOG : 0
MA I N EX I T
Notes:
The measured speaker distance may differ from
the actual distance from speakers. Nevertheless,
the measured value is suitable for the speakers.
To make changes to individual speakers, select 2.
SPEAKER SETUP on the SETUP MAIN MENU,
then select MANUAL for 2-1 SPEAKER SETUP.
The included microphone is designed specifically
for this receiver. Other microphones do not
guarantee suitable measurement results. Use the
included microphone to conduct measurements.
During measurement, press the ENTER or EXIT
button to cancel measurement.
In some rooms, an error may occur during auto
speaker setup or it may not be possible to set
Speaker distance correctly because of room
acoustics. In such case, set the speaker distance by
MANUAL setup.
Error Indications During Measurement
If trouble occurs during measurement, an error
message is displayed on the monitor screen and
FL display. Those errors and their remedies are
described below. The message appearing on the
FL display is given in ( ).
SR7500N DFU_01_ENG 2_3 04.10.13, 5:14 PMPage 22 Adobe PageMaker 6.5J/PPC
Downloaded from www.Manualslib.com manuals search engine
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz SR-8500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz SR-8500 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Marantz SR-8500

Marantz SR-8500 Gebruiksaanwijzing - English - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info