6592
15
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
11
ENGLISH
⁄5 CURSOR / OK button
Used to operate on-screen and other displays used by receivers and
other components.
⁄6 CH SEL. (channel select) button
(when AMP mode is selected)
Used to call up SETUP MAIN MENU and adjust speaker levels or 6.1
ch input level.
⁄7 SETUP button
(when AMP mode is selected)
Used to call up the setup menu of the SR7300.
⁄8 CONTROL buttons
These buttons are used when operating the CD player, TAPE deck,
etc.
The function of these buttons are dependent on the function button
selected.
(when AMP mode is selected)
ATT button
When the input signal is too high and the voice distorts even by throt-
tling the SR7300 VOLUME control, turn on this function. ATT is indi-
cated when this function is activated.
The input level is reduced. Attenuator is invalid for use with the output
signal of REC OUT.
Note:
This function is unavailable during the digital input is selected.
SPK A/B button
Speaker mode is switched in the following sequence.
A B A+B off
MULTI button
This button is used to switch the unit to multi room mode.
⁄9 Input selector buttons/ FUNCTION SE-
LECTOR buttons (AUDIO/VIDEO INPUT)
Used to switch the remote controller to the command sets for specific
sources (amplifier, receiver, etc.), thereby allowing a single remote
controller to control up to 11 different components. To use these
buttons to switch the amplifiers source, press the desired button twice
within 2 seconds. The AMP button ⁄9 is used only to switch command
set of the remote controller itself and therefore does not transmit any
signal. Further, the function buttons may also be programmed to
execute macros. (A macro allows a complex string of operations to be
performed in series simply by pressing a single button.) One button
can be programmed to learn sequences containing up to 10
commands. The following is an example of such a sequence that can
be activated automatically using a macro:
Turn the receiver ON Switch the function to DVD Set the
Surround Mode to VIRTUAL Set the DVD player to Play.
¤0 EXIT button
(when AMP mode is selected)
Used to exit SETUP MAIN MENU.
¤1 TEST button
(when AMP mode is selected)
Used to enter the test tone menu.
¤2 MENU/OSD button
(when AMP mode is selected)
When this button is pressed, the current setting are displayed on the
TV monitor.
¤3 VOLUME / buttons
Used to adjust the volume on receivers and other components (TV)
equipped with volume control.
¤4 P.SCAN (preset scan) button
(when TUNER mode is selected)
Used to start preset scan when SR7300 is selected TUNER mode.
¤5 MUTE button
Muting button of the SR7300. Press this button decrease the sound
temporarily . Press this button again to return to the previous sound.
¤6 MEMO button
Memory enable button for various preset functions.
¤7 NIGHT button
(when AMP mode is selected)
Pressing this button prevents the Dolby Digital signal from playback at
a loud voice. This function reduces the voice by 1/3 to 1/4 at maximum.
Thus, it eliminates the occurrence of an abruptly loud voice at night.
However, the function is valid only for the case when the Dolby Digital
signal is entered into OPTICAL or COAXIAL and data to compress the
voice exists in the signal to be played back.
When this button is pressed, NIGHT indicator lights up.
¤8 PTY button (European model only)
(when TUNER mode is selected)
Used to display the programme type information of the current station.
The RDS system categorizes programmes according to their genre
into different programme type (PTY) groups.
¤9 F.DIR/SEAR button
(when TUNER mode is selected)
Used to select the mode of frequency direct input.
‹0 DISP./RDS button (European model only)
(when TUNER mode is selected)
Selects display mode function in RDS (Radio Data System) by this
button.
(when AMP mode is selected)
( When this button is pressed once, the display is dimmed.
When this button is pressed twice, the display is turned off and
DISPLAY OFF indicator lights up.
Press this button again to turn the display ON again.)
‹1 A/D button
This is used to switch between the analog and digital inputs.
‹2 SLEEP (sleep timer) button
This button is used for setting the sleep timer. It can be operated the
same way as the button in unit.
‹3 7.1/6.1CH IN button
Press this button to select the output of an external multi channel decoder.
‹4 POWER ON, OFF buttons
(when AMP mode is selected)
Press to switch the power of the SR7300 ON or OFF.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz SR-7300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz SR-7300 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info