Handleiding Marantz SR-6400 (pagina 33 van 38) (Engels)

6584

Verklein

Vergroot

Pagina terug

1/38

Pagina verder

ENGLISH

MACRO MODE

PROGRAMMING MACROS

Macros make it possible to use a single function

button to perform more complex series of operations

that would normally require pressing several

buttons. A single button can be programmed to

perform up to 10 steps in a sequence. A typical

example of such a series might be as follows:

• Turn the main amplifier power ON → Switch the

function to DVD → Set the Surround Mode to

Virtual → Set the DVD player to PLAY.

• No signals may be transmitted during macro

programming.

•

The various steps that make up a macro are set

initially to be sent one after another in 1 second

intervals, however these intervals may be

shortened to as little as 0.5 seconds or lengthened

to as much as 5 seconds using the Setup mode.

• In the macro mode, the number of steps in the

macro are displayed as well as the selected

function’s name.

• Macros may be programmed for each of the 12

function buttons as follows;

TV, DVD, VCR1, DSS, TUNER, CD, CDR, MD,

TAPE, AUX1, AUX2, AMP

Press and hold the T.MODE and MENU

button until the MACRO is displayed.

• MACRO and LEARN indicators are

displayed blinking on the LCD, also.

Press the Function button for which you wish

to program a series of operations.

In this case, let’s use the example of the DVD

player.

Press the DVD Function button. The LCD will

display DVD-M.

Characters displayed on the LCD include the

following, depending on the function button for

which the macro is being programmed:

TV-M, DVD-M, VCR-M, DSS-M, TUN-M,

CD-M, CDR-M, MD-M, TAP-M, AX1-M, AX2-

M, AMP-M

• If a macro has already been set for the

selected function button, the LCD will

blink.

Press the buttons for the operations you wish

to program as a macro in the sequence you

want the macro to program them.

For example, press DVD, PLAY.

• The number of steps in the macro is

displayed on LCD and this number

increases by 1 with each button pressed.

• Each function button can be programmed

to perform up to 10 steps in sequence.

When you are finished programming macros,

press and hold the OK button until the display

returns to USE mode.

• Macros cannot be programmed for the

MEMO, cursor/OK, VOL / or CL

buttons.

In the macro mode it is possible to program

the memory to perform macros containing

up to 10 steps.

• Each of the function operations (12

including CD, CD-R, etc.) can be used in a

macro more than once, however for all

except AMP, only the first function

operation will be transmitted as a signal

from the remote controller. Accordingly,

within a single macro, it is not possible to

switch between multiple function

operations. (This is to prevent the

switching of the receiver function

operation.) Within a macro, the second

time a function operation is used, it will

only be used on the remote controller itself

and no signal will be transmitted to the

component.

Note:

• If, while programming, no buttons are

pressed for approximately 1 minute, the

remote controll will automatically return to

normal mode, and no macro will be

programmed in the memory.

CONFIRMING MACROS

Macros may be confirmed using the following

procedure.

Press and hold the T.MODE and MENU button

until the MACRO is displayed on the LCD.

•

LEARN and MACRO are displayed blinking.

Press the Function button to be confirmed.

Let’s use the example of the DVD player, by

pressing the DVD Function button.

•

DVD-M, LEARN and MACRO are displayed

blinking.

Press the VOL button.

• DVD-1 is displayed and LEARN is

disappears.

• The programmed operation is transmitting.

Repeat step

until the last number of the

macro is displayed.

• The display will return to step

•

Each programmed operation is transmitting

when the number of the macro is displayed.

To return to the USE mode, press and hold

down the OK button until USE is displayed in

the display.

EDITING MACROS

Macros may be edited using the following procedure.

Press and hold the T.MODE and MENU

button until the MACRO are displayed on the

LCD.

• LEARN and MACRO is displayed blinking.

Press the Function button to be changed.

Let’s use the example of the DVD player, by

pressing the DVD Function button.

•

DVD-M, LEARN and MACRO are displayed

blinking.

Press the Cursor / buttons to select the

number of the macro to be edited.

• The programmed operation is displayed

after the number of the macro is displayed.

• The number of the macro can be changed

with the cursor / buttons.

• To rewrite an existing macro step, simply

press the button for the new step. The old

step will be erased and rewritten with the

new step.

• To insert a new step in between existing

steps in a macro, after step

press the

MEMO button, then press the button for

the new step. The numbers of the other

steps will be adjusted accordingly to

accommodate the new step. Since only 10

steps may be stored in any macro, the

tenth step will be erased if an step is

inserted when the total number of steps is

already 10.

• To erase a step in a macro, after step

call up the number of the step to be erased

and press the CL button.

Press the OK button to return step

To return the USE mode, press and hold down

the OK button until USE is displayed in the

display.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Marantz SR-6400 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info