522805
38
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
28
ENGLISH
3. While pressing the VOL button ., use the ^ and v Cursor
buttons ⁄0 to call up the portion of the macro to be changed.
Pressing the ^ button advances through the macro steps and
pressing the
v button regresses through the macro steps.
To rewrite an existing macro step, simply press the button for
the new step. The old step will be erased and rewritten with
the new step.
To insert a new step in between existing steps in a macro,
after step 3 press the MEMO button ⁄6 , then press the button
for the new step. The numbers of the other steps will be
adjusted accordingly to accommodate the new step. Since
only 10 steps may be stored in any macro, the tenth step will
be erased if an step is inserted when the total number of
steps is already 10.
• To erase a step in a macro, after step 3 call up the number of
the step to be erased and press the CLEAR button 5.
• If while editing macros no buttons are pressed for
approximately 1 minute, the remote controller will
automatically return to normal mode, and no macro changes
will be programmed in the memory.
4. When you are finished editing macros, use a ballpoint pen or
other sharp point to press the MACRO button x. END will be
displayed on LCD a and the display will return to normal.
USING MACROS
The following procedure will show how to use the function buttons for
which you have programmed macros.
1. Press the Function button , for the desired macro for 3
seconds. MACRO is displayed on LCD a for approximately 1
second, after which the number of steps in the macro is
displayed on LCD c.
The remote controller will do nothing if no macros are
programmed. The macro steps are executed in order and the
names of their buttons are displayed on the LCD. Also, the
step numbers displayed on LCD c disappear as each step is
executed.
2. After all macro commands have been transmitted, the remote
controller returns to normal mode.
To cancel the transmission of a programmed macro, use the
Cursor buttons ⁄0 to press 7.
3. Press the buttons for the operations you wish to program as a
macro in the sequence you want the macro to program them. The
name of the button pressed appears on LCD a. The number of
steps in the macro is displayed on LCD c and this number
increases by 1 with each button pressed.
For example, press LD, PLAY.
Each function button can be programmed to perform up to 10
steps in sequence.
• If, while programming, no buttons are pressed for
approximately 1 minute, the remote controller will
automatically return to normal mode, and no macro will be
programmed in the memory.
4. When you are finished programming macros, use a ballpoint pen
or other sharp point to press the MACRO button x. LCD a will
display END, and the display will return to normal.
Macros cannot be programmed for the MODE z, MACRO
x, <3 ⁄1, VOL
/ ., MEMO ⁄6 or CLEAR ⁄5 buttons.
In the macro mode it is possible to program the memory to
perform macros containing up to 10 steps.
Each of the function operations (11 including CD, DVD, etc.)
can be used in a macro more than once, however for all
except AMP, only the first function operation will be
transmitted as a signal from the remote controller.
Accordingly, within a single macro, it is not possible to switch
between multiple function operations. (This is to prevent the
switching of the receiver function operation.) Within a macro,
the second time a function operation is used, it will only be
used on the remote controller itself and no signal will be
transmitted to the component.
EDITING MACROS
Macros may be edited using following procedure.
1. Use a ballpoint pen or other sharp point to press the MACRO
button x until the MACRO and LEARN indicators are displayed
blinking on the LCD.
2. Press the Function button , to be changed. Let’s use the
example of the laser disc player, by pressing the LD Function
button ,.
LD-M is displayed blinking on LCD a.
The number of steps in the completed macro is highlighted
on LCD c. In this example there are 3 macro programs in
memory.
The
is highlighted if no macros have been programmed,
and the remote controller is ready for macro programming.
MEMO
GUIDE
MUTE
CH
VOL
1
2
3
4
5
6
7 8 0
9
CD
DVD
CD-R/MD
DSS TV VCR
TUNER
TAPE
PHONO
AUTO
SRS
6.1
5ch-ST.
Dolby H
P-DIRE.
2CH OSD SLEEP
AMP
2
LD
CLEAR
OK
CH
VOL
CD
DVD
CD-R/MD
DSS T V VCR
PHONO
OK
GUIDE
MUTE
1
2
3
4
5
6
78 0
9
TUNER
TAPE
AUTO
SRS
6.1
5ch-ST.
Dolby H
P-DIRE.
2CH OSD SLEEP
AMP
2
LD
CLEAR
MEMO
MEMO
GUIDE
MUTE
1
2
3
4
5
6
7 8 0
9
TUNER
TAPE
AUTO
SRS
6.1
5ch-ST.
Dolby H
P-DIRE.
2CH OSD SLEEP
AMP
2
LD
CLEAR
MEMO
CLEAR
GUIDE
MUTE
1
2
3
4
5
6
78 0
9
DSS TV VCR
TUNER
TAPE
PHONO
AUTO
SRS
6.1
5ch-ST.
Dolby H
P-DIRE.
2CH OSD SLEEP
AMP
2
LD
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz PS17 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz PS17 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info