522805
30
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
20
ENGLISH
ON SCREEN DISPLAY
INFOMATION
The on-screen display, which can be activated by the Main unit or
remote, appears on the TV screen to show the current setting status
of the PS-17.
These are available, when OSD INFO setup is selected “ENABLE”.
Note:
Each video input function is set PAL or NTSC for TV format of OSD. If
this setup does not meet the video input signal, character of OSD can
notsynchronize.
So you can select these format function by function.
Press OSD button ⁄7 on the remote controller for 3 seconds or more.
“PAL” or “NTSC” will be shown on the FL display of PS-17, press OSD
button ⁄7 again to change the TV format.
The indicator on FL display will change “PAL” “NTSC” “PAL” .
This setup is memorized with each video input function.
1. GENERAL INFORMATION
When the OSD button is pressed, the current settings are displayed
on the TV monitor.
Press the OSD button again, and this display will disappear.
This information will disappear automatically in about 10 seconds
after the button is pressed.
VIDEO: Displays the current video source being
selected with the function selector
TV, LD, DVD, VCR1, DSS.
AUDIO: Displays the current audio source being
selected with the function selector
PHONO, CD, TAPE or CD-R.
DIGITAL INPUT: Displays the selected digital input .
DIG-1, DIG-2, DIG-3 , DIG-4 , DIG-5 or DIG-6.
DIGITAL OUTPUT: Displays the digital output that is being used
for recording
SOURCE , DIG-1, DIG-2, DIG-3 , DIG-4 , DIG-
5, DIG-6, OFF.
SURR-MODE: Displays the current surround mode
e.g.
AUTO, DOLBY, 6.1, SRS, 5-STEREO,
STEREO, S-DIRECT or 6CH INPUT.
DH ROOM: Displays the current DOLBY HEADPHONE
ROOM DH1, DH2, DH3 or BP (Bypass).
MAIN VOLUME: Displays the current volume level.
The volume level moves higher to right of the
display, and the pointer changes to “ ” at 0
dB.
Note:
The On-Screen Display signals can be output from the TV MONI
composite video (RCA) output and the TV MONI, S-Video output
jacks.
With some video equipment or software, the On-Screen Display
characters may be distorted due to noise or tracking adjustment
error.
2. FUCTION SELECT & SURROUND MODE
When a function or surround mode button is selected:
VIDEO: Displays the current video source. When DSS/TV, LD,
DVD, VCR or AUX is selected with the function selector,
both AUDIO and VIDEO shows the same name.
AUDIO: Displays the current analog audio input source.
DIGITAL: Displays the current digital input source.
SURR-MODE: Displays the current Surround mode as follows;
e.g.
AUTO, DOLBY, 6.1, SRS, 5-STEREO, STEREO, S-
DIRECT or 6CH INPUT.
LFE LEVEL: Displays the current LFE LEVEL.
3. MASTER VOLUME CONTROL
Displayed when the MASTER volume is varied or a buttons of the
remote handset is pressed.
The box display indicates the 0 dB level with a solid box “
”.
4. MUTE
When the MUTE ⁄3 button is pressed on the remote control, “MUTE”
will be shown on screen. Pressing MUTE button again will clear the
display, or adjust the volume.
5. SLEEP TIMER
When the SLEEP button is pressed, the setting on or off and the
remaining time of the sleep timer function are displayed.
You can change the mode between on, off and the amount of time to
elapse before the unit will shut itself off by cycling the SLEEP button.
DH ROOM DH1
MA I N
LFE LEVEL 0d B
MA I N
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz PS17 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz PS17 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info