6528

Marantz PM-11S1 Handleiding

11
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
Model PM-11S1 User Guide
Integrated Amplifier
ENGLISH
WARRANTY
For warranty information, contact your local Marantz distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a valuable purchase. It should be kept
in a safe place to be referred to as necessary for insurance purposes or when corresponding
with Marantz.
IMPORTANT
When seeking warranty service, it is the responsibility of the consumer to establish proof
and date of purchase. Your purchase receipt or invoice is adequate for such proof.
FOR U.K. ONLY
This undertaking is in addition to a consumer's statutory rights and does not affect
those rights in any way.
FRANÇAIS
GARANTIE
Pour des informations sur la garantie, contacter le distributeur local Marantz.
CONSERVER L'ATTESTATION D'ACHAT
L'attestation d'achat est la preuve permanente d'un achat de valeur. La conserver en
lieu sur pour s'y reporter aux fins d'obtention d'une couverture d'assurance ou dans
le cadre de correspondances avec Marantz.
IMPORTANT
Pour l'obtention d'un service couvert par la garantie, il incombe au client d'établir la
preuve de l'achat et d'en corroborer la date. Le reçu ou la facture constituent des
preuves suffisantes.
DEUTSCH
GARANTIE
Bei Garantiefragen wenden Sie sich bitte an Ihren Marantz-Händler.
HEBEN SIE IHRE QUITTING GUT AUF
Die Quittung dient Ihnen als bleibende Unterlage für Ihren wertvollen Einkauf Das
Aufbewahren der Quittung ist wichtig, da die darin enthaltenen Angaben für
Versicherungswecke oder bei Korrespondenz mit Marantz angeführt werden müssen.
WICHTIG!
Bei Garantiefragen muß der Kunde eine Kaufunterlage mit Kaufdatum vorlegen. Ihren
Quittung oder Rechnung ist als Unterlage ausreichend.
NEDERLANDS
GARANTIE
Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke Marantz.
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van een waardevol
artikel en dienen op een veilige plaats bewaard te worden voor evt, verwijzing bijv, in
verbend met verzekering of bij correspondentie met Marantz.
BELANGRIJK
Bij een evt, beroep op de garantie is het de verantwoordelijkheid van de consument
een gedateerd bewijs van aankoop te tonen. Uw kassabon of factuurzijn voldoende
bewijs.
ESPAÑOL
GARANTIA
Para obtener información acerca de la garantia póngase en contacto con su
distribuidor Marantz.
GUARDE SU RECIBO DE COMPRA
Su recibo de compra es su prueba permanente de haber adquirido un aparato de
valor, Este recibo deberá guardarlo en un lugar seguro y utilizarlo como referencia
cuando tenga que hacer uso del seguro o se ponga en contacto con Marantz.
IMPORTANTE
Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad
de demonstrar cuándo efectuó la compra. En este caso, su recibo de compra será la
prueba apropiada.
ITALIANO
GARANZIA
L’apparecchio è coperto da una garanzia di buon funzionamento della durata di un
anno, o del periodo previsto dalla legge, a partire dalla data di acquisto comprovata
da un documento attestante il nominativo del Rivenditore e la data di vendita. La
garanzia sarà prestata con la sostituzione o la riparazione gratuita delle parti difettose.
Non sono coperti da garanzia difetti derivanti da uso improprio, errata installazione,
manutenzione effettuata da personale non autorizzato o, comunque, da circostanze
che non possano riferirsi a difetti di funzionamento dell’apparecchio. Sono inoltre
esclusi dalla garanzia gli interventi inerenti l’installazione e l’allacciamento agli impianti
di alimentazione.
Gli apparecchi verranno riparati presso i nostri Centri di Assistenza Autorizzati. Le
spese ed i rischi di trasporto sono a carico del cliente.
La casa costruttrice declina ogni responsabilità per danni diretti o indiretti provocati dalla
inosservanza delle prescrizioni di installazione, uso e manutenzione dettagliate nel presente
manuale o per guasti dovuti ad uso continuato a fini professionali.
PORTUGUÊS
GARANTIA
Para informações sobre a garantia, contactar o distribuidor Marantz local.
GUARDAR O RECIBO DE COMPRA
O recibo é o registo permanente da compra que fez. Deve ser guardado num local
seguro, para ser apresentado em questões relacionadas com o seguro ou para quando
tiver de contactar a Marantz.
IMPORTANTE
Quando procurar assisténcia técnica ao abrigo da garantia, é da responsabilidade
do consumidor estabelecer a prova e data de compra. O recibe é prova adequada.
SVENSKA
GARANTI
För information om garantin, kontakta Marantz lokalagent.
SPAR KVITTOT
Kvittot är ett inköpsbevis på en värdefull vara. Det skall förvaras säkert och hänvisas
till vid försäkringsfall eller vidkorrespondens mod Marantz.
VIKTIGT
Fö att garantin skall gälla är det kundens sak att framställa bevis och datum om
köpet. Kvitto eller faktura är tillräokligt bevis fö detta.
DANSK
GARANTI
Henvend dem til Deres MARANTZ-forhandler angående inrformation om garantien.
GEM DERES KVITTERING
Deres købskvittering er Deres varige bevis på et dyrt køb. Den bør gemmes godt og
anvendes som bevis, hvis De vil tegne en forsikring, eller hvis De kommunikerer med
Marantz.
VIGTIGT
Det påhviler forbrugeren at skaffe bevis for købet og købsdatoen, hvis han eller hun ønsker
garantiservice. Deres købskvittering eller faktura er et fuldgyldigt bevis herpå.
PM-11S1N(Cover) 04.8.18, 1:49 AMPage 1 Adobe PageMaker 6.5J/PPC
CE MARKING
English
The PM-11S1 is in conformity with the EMC directive and low-voltage directive.
Français
Le PM-11S1 est conforme à la directive EMC et à la directive sur les basses tensions.
Deutsch
Das Modell PM-11S1 entspricht den EMC-Richtlinien und den Richtlinien für
Niederspannungsgeräte.
Nederlands
De PM-11S1 voldoet aan de EMC eisen en de vereisten voor laag-voltage.
Español
El PM-11S1 está de acuerdo con las normas EMC y las relacionadas con baja tensión.
Italiano
Il PM-11S1 è conforme alle direttive CEE ed a quelle per i bassi voltaggi.
Português
O PM-11S1 conforma com as diretrizes EMC e de baixa voltagem.
Svenska
PM-11S1 är tillverkad i enlighet med EMC direktiven och direktiven för lågvoltsutrusning.
Dansk
Model PM-11S1 er i overensstemmelse med EMC-direktiveet og direktivet om
lavspænding.
English
WARNINGS
-
Do not expose the equipment to rain or moisture.
- Do not remove the cover from the equipment.
-
Do not insert anything into the equipment through the ventilation
holes.
- Do not handle the mains lead with wet hands.
-
Do not cover the ventilation with any items such as tablecloths,
newspapers, curtains, etc.
-
No naked flame sources, such as lighted candles, should be placed
on the equipment.
-
When disposing of used batteries, please comply with
governmental regulations or environmental public instruction’s
rules that apply in your country or area.
-
Do not place anything about 0.2 meter above the top panel.
-
Make a space of about 0.1 meter around the unit.
Français
AVERTISSEMENTS
- Ne pas exposer l’appareil à la pluie ni à l’humidité.
- Ne pas essayer de retirer le boîtier de l’appareil.
- Ne rien insérer dans l’appareil par les orifices de ventilation.
- Ne pas manipuler le cordon d’alimentation avec les mains
mouillées.
- Ne pas recouvrir les ouïes de ventilation avec un objet
quelconque comme une nappe, un journal, un rideau, etc.
- Ne placer aucune source de flamme nue, comme une bougie
allumée, sur l'appareil.
- Pour mettre au rebut les piles usées, respecter les lois
gouvernementales ou les règlements officiels concernant
l’environnement qui s'appliquent à votre pays ou région.
- Ne placez aucun object à moins de 0,2 mètre environ du panneau
supérieur.
- Veiller à ce qu’aucun objet ne soit à moins de 0,1 mètre des côtés
de l'appareil.
Deutsch
WARNHINWEISE
- Das Gerät nicht Regen oder Feuchtigkeit aussetzen.
- Die Abdeckung nicht vom Gerät abnehmen.
- Keine Gegenstände durch die Belüftungsschlitze stecken.
- Das Netzkabel nicht mit feuchten oder nassen Händen anfassen.
- Decken Sie die Lüftungsöffnungen nicht mit einem Tischtuch,
einer Zeitung, einem Vorhang usw. ab.
- Es dürfen keine Gegenstände mit offener Flamme, wie etwa
brennende Kerzen, auf dem Gerät aufgestellt werden.
- Beachten Sie bei der Entsorgung der verbrauchten Batterien alle
geltenden lokalen und überregionalen Regelungen.
- Darauf achten, daß über dem Gerät ein Freiraum von mindestens
0,2 meter vorhanden ist.
- Auf allen Geräteseiten muß ein Zwischenraum von ungefähr 0,1
meter vorhanden sein.
Nederlands
WAARSCHUWINGEN
- Stel het apparaat niet bloot aan regen of vocht.
- Verwijder de afdekplaat van het apparaat niet.
- Duw niets door de ventilatieopeningen in het apparaat.
- Raak het netsnoer niet met natte handen aan.
- Bedek de ventilatieopeningen niet met enige voorwerpen, zoals
tafelkleden, kranten, gordijnen, enz.
- Plaats geen brandende voorwerpen, zoals kaarsen, op het
apparaat.
- Volg bij het weggooien van verbruikte batterijen de
overheidswetgeving of milieuvoorschriften op die van kracht zijn
in het land of de regio waarin u zich bevindt.
- Zorg dat er tenminste 0,2 meter vrije ruimte boven het toestel is.
- Zorg dat er 0,1 meter vrije ruimte rond het toestel is.
PM-11S1N(Cover) 04.8.18, 1:49 AMPage 2 Adobe PageMaker 6.5J/PPC
Español
ADVERTENCIAS
-
No exponga el equipo a la lluvia ni a la humedad.
- No extraiga la tapa del equipo.
- No introduzca nada en el interior del equipo a través de los
orificios de ventilación.
- No maneje el cable de alimentación con las manos mojadas.
- No cubra la ventilación con objetos como manteles, periódicos,
cortinas, etc.
- No deben colocarse sobre el equipo elementos con fuego, por
ejemplo velas encendidas.
- Cuando se eliminen baterías usadas, deben cumplirse las
reglamentaciones oficiales o las normas de protección
medioambiental aplicables en su país o en su zona.
- No ponga nada a menos de 0,2 metro por encima del panel
superior.
- Deje un espacio de unos 0,1 metro alrededor de la unidad.
Italiano
AVVERTENZE
- Non esporre l’apparecchio alla pioggia o all’umidità.
- Non rimuovere il coperchio dell’apparecchio.
- Non introdurre oggetti all’interno dell’apparecchio attraverso i fori
di ventilazione.
- Non toccare il cavo di alimentazione con le mani bagnate.
- Non coprire le fessure di ventilazione con tovaglie, giornali, tende
od oggetti analoghi.
- Non posare sull'apparecchio sorgenti di fiamme scoperte quali
candele accese.
- Smaltire le pile usate in conformità alle norme governative o
disposizioni ambientali vigenti nel proprio paese o zona.
- Non posare alcun oggetto sopra il pannello superiore, lasciando
libero uno spazio di circa 0,2 m.
- Lasciare 0,1 metro liberi tutto intorno l'unità.
Português
ADVERTÊNCIAS
-Não exponha o equipamento à chuva nem à humidade.
-Não retire a tampa do equipamento.
-Não atire nada para dentro do equipamento através dos orificíos
de ventilação.
-Não manuseie o cabo de alimentação com as mãos molhadas.
-Não cobrir os orifícios de ventilação com objectos tais como
toalhas de mesa, jornais, cortinas, etc.
-Não colocar chamas abertas tais como velas acesas, sobre o
aparelho.
- Ao deitar foras as pilhas usadas, favor observar os regulamentos
governamentais ou as regras com respeito ao meio ambiente
que se aplicam no seu país ou área de residência.
- Deixar um espaço completamente livre de cerca de 0,2 metro
acima do painel superior.
- Deixar um espaço de cerca de 0,1 metro ao redor do aparelho.
Svenska
VARNINGAR
- Utsätt inte utrustningen för regn eller fukt.
- Ta inte bort utrustningens hölje.
-
För inte in föremål i utrustningen genom ventilationshålen.
- Hantera inte nätsladden med våta händer.
-Täck inte för ventilationsöppningarna med några föremål som till
exempel bordsdukar, dagstidningar, gardiner e.d.
- Inga föremål med öppen låga, som till exempel tända stearinljus,
bör placeras på utrustningen.
-Följ de lagar och miljöskyddsråd som gäller i det land eller
område där du bor när du gör dig av med batterier.
- Placera inte någonting närmare än 0,2 meter ovanför apparaten
eller enheten.
- Se till att det finns omkring 0,1 meter fri plats runt omkring
enheten.
Dansk
ADVARSLER
- Udsæt ikke udstyret for regn eller fugt.
- Fjern ikke dækslet fra udstyret.
- Stik ikke noget ind i udstyret gennem ventilationshullerne.
-Rør ikke ved netledningen med våde hænder.
- Tildæk ikke ventilationsåbningerne med ting som duge, aviser,
gardiner og lignende.
- Kilder til åben ild, som for eksempel tændte sterarinlys, må ikke
anbringes på apparatet.
-Når du skiller dig af med gamle batterier, bedes du gøre dette i
overensstemmelse med de love, regler og miljømæssige
forskrifter, som er gældende i dit land eller område.
- Anbring ikke noget nærmere end 0,2 m over apparatets overside,
-Sørg for, at der er et frit område på omkring 0,1 m omkring
apparatet.
PM-11S1N(Cover) 04.8.18, 1:49 AMPage 3 Adobe PageMaker 6.5J/PPC
1
ENGLISH
ENGLISH
FOREWORD.......................................................................................................................................... 2
FEATURES ............................................................................................................................................ 3
BEFORE USE ........................................................................................................................................ 4
BEFORE MAKING CONNECTIONS ..................................................................................................... 5
ABOUT THE BALANCED INPUT JACKS ...........................................................................................................5
WIRING SPEAKER CABLE ................................................................................................................................5
BI-WIRING CONNECTION .................................................................................................................................6
COMPLETE BI-AMP CONNECTION ..................................................................................................................6
SPEAKER POSITIONING FOR SUPER AUDIO MULTI-CHANNEL SOUND ....................................................6
CONNECTIONS .................................................................................................................................... 7
NAMES AND FUNCTIONS OF PARTS ............................................................................................... 10
FRONT PANEL .................................................................................................................................................10
DISPLAY ...........................................................................................................................................................11
REAR PANEL ...................................................................................................................................................12
RC-11PMS1 REMOTE CONTROLLER ............................................................................................................ 13
BASIC OPERATION ............................................................................................................................ 15
PLAYBACK ........................................................................................................................................................15
RECORDING ....................................................................................................................................................16
HOW TO USE AND SET FEATURES .................................................................................................. 17
ABOUT FCBS ...................................................................................................................................................17
ABOUT THE BI-AMP MODE ............................................................................................................................ 17
ATTENUATION (ATT)........................................................................................................................................18
HOW TO OPERATE THE SIDE ILLUMINATION ...............................................................................................18
TRIMMING ........................................................................................................................................................19
HOW TO ADJUST DISPLAY CONTRAST ........................................................................................................21
HOW TO SET ID ...............................................................................................................................................21
TROUBLESHOOTING ......................................................................................................................... 22
OTHERS .............................................................................................................................................. 23
SPECIFICATIONS & DIMENSIONAL DRAWINGS .............................................................................. 24
CONTENTS
PM-11S1N ENG(P01-P06)A4 04.8.17, 11:34 PMPage 1 Adobe PageMaker 6.5J/PPC
2
ENGLISH
ENGLISH
FOREWORD
This section must be read before any connection is made to
the mains supply.
77
77
7 EQUIPMENT MAINS WORKING
SETTING
Your Marantz product has been prepared to comply with the
household power and safety requirements that exist in your
area.
PM-11S1 can be powered by 230V AC only.
77
77
7 COPYRIGHT
Recording and playback of any material may require consent.
For further information refer to the following:
— Copyright Act 1956
— Dramatic and Musical Performers Act 1958
— Performers Protection Acts 1963 and 1972
— Any subsequent statutory enactments and orders
PM-11S1N ENG(P01-P06)A4 04.8.17, 11:34 PMPage 2 Adobe PageMaker 6.5J/PPC
3
ENGLISH
ENGLISH
The PM-11S1 is an integrated amplifier developed on the con-
cepts of Marantz’s SC-7S1 and MA-9S1 flagship amplifiers.
•HDAM
SA2
The HDAM
SA2 is an evolved version of the HDAM
SA incor-
porated into the SC-7S1 and MA-9S1. It drives the phono
amplifier, balance buffer, line buffer, volume amplifier, voltage
amplifier and power buffer that comprise the PM-11S1.
Input Amplifier
• Current Feedback Phono Equalizer
The phono equalizer of the PM-11S1 supports MC/MM car-
tridges and incorporates the first-ever current feedback circuit
used with a Marantz product. The newly designed circuitry
employs both Marantz’s previous HDAM
and the newly de-
veloped HDAM
SA2.
• Current Feedback Balance Buffer
The PM-11S1 incorporates an HDAM
SA2-driven current feed-
back balance buffer that faithfully transfers signals from de-
vices of quality balanced output such as super audio CD play-
ers and D/A converters.
• Individual Input Buffer for Each Line
Input Jack
Each the CD, LINE 1, LINE 2, RECORDER 1 and RECORDER
2 input jack has its own input buffer built on HDAM
SA2 tech-
nology. By providing each line with its own buffer amp, it is
possible to prevent interference between input sources and
thereby faithfully transfer signals from the input source.
Preamplifier
• Linear Control Volume
The PM-11S1 incorporates linear control volume that carry
forward the design concepts of the SC-7S1. In combination
with the WM8816 by Wolfson and the HDAM
SA2, these lin-
ear control varistors improve S/N ratio, enabling smooth con-
trol in ±0.5 dB steps across a 0 - -100 dB range.
• Tone Control Amplifier
The PM-11S1 incorporates an adjustable jack-type tone con-
trol amplifier for controlling bass and treble in 2 dB steps across
a ±8 dB range. The left and right channels can be separately
adjusted from the remote controller.
FEATURES
Power Amplifier
• Dual Amplifier Structure
The PM-11S1 carries on the dual amplifier design concepts of
the MA-9S1 with separate voltage and power amplifiers. With
this dual amp structure, the power buffer powerfully drives the
speakers whereby shutting out the effects of return current
from the speakers. The voltage amplifier drives the power buffer
with ultra low distortion.
Power
• Choke Input Power Supply
The PM-11S1 incorporates a choke input power circuit built
with a high capacity smoothing capacitor in order to thoroughly
eliminate high frequency noise from the rectifier circuit and
external sources. It delivers a distortion-free power supply to
the input amplifier and preamplifier.
Functions
• Bi-Amp Mode
The complete bi-amp connection proposed by Marantz with
the SC-7S1 and MA-9S1 reproduces a sound environment
never before experienced. This same bi-amp connection has
been made possible with the PM-11S1. Two PM-11S1s are
connected by FCBS in a bi-amp mode that enables each to
work as a monaural integrated amplifier.
• Floating Control Bus System
A Floating Control Bus System (FCBS) enables the user to
connect up to four PM-11S1s, making possible a diversity of
applications with complete bi-amp and multiple channel con-
nections. Moreover, a ground loop is not formed between mul-
tiple connected PM-11S1s, therefore sound quality is not ad-
versely affected.
• Display
The PM-11S1 adopts an LCD to display input source and vol-
ume level. Compared to other types of display panels, an LCD
generates less drive noise and radiated noise, hence the ef-
fect on sound quality is minimal.
INTEGRARED AMPLIFIER PM-11S1
POWER ON/OFF
PHONES
VOLUME
A
TONE
SPEAKER
B
SPEAKER
REC OUT
PRE OUT
ATT.
MC
OPERATE
PHONO
DISPLAY
SELECTOR
INPUT
PM-11S1N ENG(P01-P06)A4 04.8.17, 11:34 PMPage 3 Adobe PageMaker 6.5J/PPC
4
ENGLISH
ENGLISH
77
77
7 Do Not Locate in the Following
Places
To ensure long-lasting use, do not locate the PM-11S1 where:
• Exposed to direct sunlight.
• Near to sources of heat such as heaters.
• Highly humid or poorly ventilated.
• Dusty.
• Subjected to mechanical vibrations.
• On wobbly, inclined or otherwise unstable surfaces
• Radiated heat is blocked such as in cramped audio racks.
To ensure proper heat radiation, ensure the below clear-
ance from walls and other equipment.
77
77
7 Keep Objects Off
Keep objects off the PM-11S1. Blocking the vent can result in
accident and damage.
77
77
7 Do Not Touch Hot Spots During
and Immediately After Use
During and immediately after use, the PM-11S1 is hot in ar-
eas other than the controls and rear panel connection jacks.
Do not touch hot spots and especially the top panel. Contact
with hot areas can cause burns.
BEFORE USE
L
TRIM
RC-11PMS1
FM/BAM/A
RETURN
TOP MENU
MENU
VOLUME
CLOSE
MODE
PHONO
CD
BALANCED
RECORDER 1
LINE 1
RECORDER 2
LINE 2
EXIT
TONE
ENTER
DISPLAY
ATT
SCAN
RANDOM REPEAT
+
-
OPEN/ SOUND
R
INTEGRARED AMPLIFIER PM-11S1
POWER ON/OFF
PHONES
VOLUME
A
TONE
SPEAKER
B
SPEAKER
REC OUT
PRE OUT
ATT.
MC
OPERATE
PHONO
DISPLAY
SELECTOR
INPUT
Left
10 cm or more
Above
20 cm or more
Right
10 cm or more
Rear
10 cm or more
77
77
7 Battery Handling
Improper use of dry cell batteries can result in electrolyte leaks,
rupture and corrosion. Read the following precautions before
use.
• If not planning to use the remote controller for an extended
period of 1 month or more, remove the batteries.
• Do not mix old batteries with new batteries.
• Load batteries in the proper direction indicated on the re-
mote controller.
• Do not mix batteries of differing type. Even batteries of the
same shape and size can have differing voltages.
• If batteries leak, wipe the case clean of any adhering elec-
trolyte and replace the old batteries with new batteries.
77
77
7 Accessories Check
Before use, check the below accessories were included in the
package.
• AC power cable
The power cable included in the package can be used with
the PM-11S1 only. It cannot be used with other equipment.
• RC-11PMS1 remote controller
• AAA batteries x 2
• Instruction Manual (This manual)
PM-11S1N ENG(P01-P06)A4 04.8.17, 11:34 PMPage 4 Adobe PageMaker 6.5J/PPC
5
ENGLISH
ENGLISH
ABOUT THE BALANCED INPUT
JACKS
q The PM-11S1 uses XLR connectors for the BALANCED
INPUT jacks. XLR connectors are widely used with profes-
sional equipment because of the following features.
• Incoming music signals are balanced, therefore they are
little affected by external noise.
• The detachable locking mechanism minimizes connec-
tor play and enhances connection reliability.
w There are two ways to connect the XLR connectors.
1.In the USA
2.In Europe
e The PM-11S1 adopts the USA circuitry. If the PM-11S1 is
connected via a balanced cable to a preamplifier or control
amplifier of European circuitry, signal phases will be re-
versed. To correctly align signal phases, switch the w and
e pins of one of the XLR connectors.
BEFORE MAKING CONNECTIONS
Your speaker system must satisfy the below conditions. If it
does not, the PM-11S1’s protective circuit will trip, whereby
preventing proper playback. In some cases, the amplifier and
speakers may be damaged.
• If using 1 set of speakers, total speaker impedance must be
4Ω or more.
• If using 2 sets of speakers, total speaker impedance must
be 8Ω or more.
21
3
GND
COLD
HOT
21
3
HOT
GND
COLD
WIRING SPEAKER CABLE
• Be careful not to short circuit in wiring speaker cables.
• Peel off the corting of speaker cable as shown below.
• Wiring with speaker cable.
Approx. 1 cm
Cut
the corting
of cable.
Peel off the
edge of cable.
Twist
conductors.
Turn counter-clockwise
to loosen.
Insert conductor
of cable.
Turn clockwise
to
tighten.
• Wiring with “Y” style terminal
Turn counter-clockwise
to loosen.
Insert conductor.
Turn clockwise
to
tighten.
PM-11S1N ENG(P01-P06)A4 04.8.17, 11:34 PMPage 5 Adobe PageMaker 6.5J/PPC
6
ENGLISH
ENGLISH
Here following are explained two types of connections that
improve sound quality. The speakers in these explanations have
low and mid/high input jacks that support a bi-amp connec-
tion. To determine whether or not your speakers support a bi-
amp connection, check in the instruction manual that came
with your speakers or contact the manufacturer.
BI-WIRING CONNECTION
A bi-wiring connection separately connects the low and mid/
high jacks of the speaker to the amplifier using separate
speaker cables. Because separate cables are used for low
and mid/high sounds, the return current generated in the low
speaker causes little interference with the mid/high speaker.
The PM-11S1 and speakers of Connection Example 1 use a
bi-wiring connection, therefore also refer to that page for help.
COMPLETE BI-AMP CONNECTION
Proposed by Marantz, the complete bi-amp connection en-
hances the bi-wiring connection. With it, the low and mid/high
amplifiers are separate and independent of the preamplifier,
therefore interference between low and mid/high sounds is
reduced to a minimum. As a result, a wide sound environment
can be reproduced. Connection Example 3 connects two PM-
11S1s by FCBS in a complete bi-amp connection, therefore
also refer to that page for help.
CD
player,
etc.
Bi-wiring
connection
Speaker system
Band
pass filter
Mid/high
speaker
Low
speaker
SPEAKER POSITIONING FOR SUPER
AUDIO MULTI-CHANNEL SOUND
In order to enjoy Super Audio CD multi-channel sound with
the best possible acoustics, it is recommended to position
speakers as specified in ITU-R BS.775-1 of the International
Telecommunication Union (ITU). Super Audio CD multi-chan-
nel discs are recorded and mixed so as to achieve the opti-
mum effect with a speaker system laid out as specified in ITU-
R BS.775-1.
• With Super Audio CD multi-channel discs, the music sig-
nals are basically recorded using 5 channels (3 - 6 chan-
nels sometimes), but in some cases, LFE (for subwoofer) is
recorded as a sixth channel. Each disc indicates how many
channels have been recorded on it.
• The basic layout is 3 speakers in the front and 2 in the back
since multi-channel discs usually have 5 channels. The 2
front, 1 center and 2 surround (rear) speakers should be set
in a circle around the listening point as shown below. If us-
ing speakers of differing sizes, adjust volume balance from
the amplifier.
• The location of the subwoofer in the figure is just for ex-
planatory purposes. It can be located anywhere in the room.
For connection and positioning instructions, see the instruc-
tion manual that came with the subwoofer.
77
77
7 ITU (International Telecommuni-
cation Union)
The ITU is a special organization of the United Nations. It
consists of a number of organs, one of which is the Radio
Broadcasting Section.
ITU-R BS in the recommendation which consists of standards
relating to broadcasting (audio) operations, one of which is
the ITU-R BS.775-1 which governs “multi-channel stereo sound
systems.”
Complete bi-amp connection Speaker system
CD
player,
etc.
PM-11S1 bi-
amp mode
Band
pass filter
Mid/high
speaker
Low
speaker
Center
speaker
Rear speaker
(Right Surround)
Sub-woofer
Front speaker
(Left)
Rear speaker
(Left Surround)
Front speaker
(Right)
Reference listening
position
approx. 110° approx. 110°
BEFORE MAKING CONNECTIONS
PM-11S1
PM-11S1N ENG(P01-P06)A4 04.8.17, 11:34 PMPage 6 Adobe PageMaker 6.5J/PPC
9
ENGLISH
ENGLISH
Connection Example 3: Complete Bi-Amp Connection for Stereo Playback Using 2 PM-11S1
The speaker system must support a bi-amp connection, therefore to determine whether your speakers do or not, check in the
instruction manual that came with your speakers or contact the manufacturer. The two PM-11S1s are connected by FCBS. For the
FCBS connection, prepare 2 portable audio connection cables with monaural ⇔ monaural miniplugs or stereo ⇔ stereo miniplugs
as described “ABOUT FCBS” on pg. 17. Set the ID numbers for the PM-11S1 units as explained “HOW TO SET ID” on pg. 21. When
the PM-11S1 of ID 1 is operated, that of ID 2 will operate in sync.
AC IN
3
1
2
3
1
2
AC IN
3
1
2
3
1
2
PAUSEPAUSE
STOPSTOP
PLAYPLAY
DISPLAY OFF
OPEN/OPEN/
SOUNDSOUND
POWER ON/OFFPOWER ON/OFF
SUPER AUDIO CD PLAYER SA-11S1SUPER AUDIO CD PLAYER SA-11S1
CLOSECLOSE
MODEMODE
MF
/
HF
LF
MF
/
HF
LF
Set SPEAKER
A button on
front panel in
ON position.
Set PM-11S1 for
L CH to ID 1.
Set to “BI-AMP”.
Set SPEAKER
A button on
front panel in
ON position.
Set PM-11S1 for
R CH to ID 2.
Set to “BI-AMP”.
To power
outlet
To power
outlet
Remove
shorting bar.
L CH speaker Remove
shorting bar.
Remove
shorting bar.
R CH speaker Remove
shorting bar.
CONNECTIONS
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 9 Adobe PageMaker 6.5J/PPC
10
ENGLISH
ENGLISH
NAMES AND FUNCTIONS OF PARTS
FRONT PANEL
q POWER ON/OFF Switch
This switch turns power to the PM-11S1 ON and OFF. When
pressed, power is activated and the blue indicator on the
display w lights up. Approximately 8 seconds after power
is activated, audio output is enabled. Pressing the switch
again turns power OFF.
w Display
The display displays the selected input source, volume level
and setting status.
e INPUT SELECTOR Knob
This knob is for selecting the input source to use in play-
back and recording. The selected input source is displayed
on the display w.
r VOLUME Knob
This knob is for setting the volume. The volume level is
displayed on the display w. Turning the knob clockwise
increases the volume, while turning it counterclockwise de-
creases the volume. When turned slowly, the volume can
be fine-adjusted in 0.5 dB steps, whereas when turned
rapidly, volume level changes greatly.
t Infrared Receptor Window
This is the receptor of control signals sent from the included
RC-11PMS1 remote controller. Point the remote controller
towards this window to properly send signals.
y PHONES Jack
This jack is for connecting headphones with a standard
stereo plug. To listen with headphones, turn speaker out-
put OFF by setting the SPEAKER A and B buttons in the
OFF position.
u DISPLAY Button
This button turns the display and side illumination ON and
OFF. The button performs two functions depending on how
long it is pressed.
If pressed and held for 3 seconds or longer:
Turns the side illumination !4 on both sides of the display
ON and OFF. This operation sets the always-ON mode of
the side illumination, therefore once the side illumination
is turned OFF, it stays OFF and does not light even if power
is shut OFF and reactivated. To turn the side illumination
ON again, press and hold the DISPLAY button for 3 sec-
onds or longer.
If pressed and held for less than 3 seconds:
Turns the display ON and OFF. When the always-ON mode
is engaged for the side illumination, the side illumination
turns ON and OFF in synch with the display.
If the display is out and the VOLUME knob or other control
is operated, the display lights up. It will automatically go
out 3 seconds after the operation has been completed.
For instructions on how to operate the side illumination,
see “HOW TO OPERATE THE SIDE ILLUMINATION” on
pg. 18.
i TONE Button
This button turns the bass and treble tone control ON and
OFF. When tone control is ON, the center of the button is lit
a blue color. For instructions on how to adjust bass and
treble, see “How to Trim Bass” and “How to Trim Treble”
on pg. 20.
o SPEAKER A/B Buttons
These buttons turn the speaker output to the speakers
connected to the SPEAKER SYSTEM A/B terminals on
the rear panel ON and OFF. When speaker output is ON,
the center of the button is lit a blue color. To listen with
headphones, turn speaker output OFF.
!0 ATT Button
This button attenuates volume with one press of the but-
ton. When pressed, “ATT” flashes on the display and the
volume is reduced. If pressed again, the mode is canceled
and the original volume level is restored. Attenuation level
is set to –20 dB when the PM-11S1 is shipped from the
factory, but it can be set to either –40 dB or -∞ (mute). For
instructions on how to set attenuation level, see “How to
Set Attenuation Level” on pg. 18.
INTEGRARED AMPLIFIER PM-11S1
POWER ON/OFF
PHONES
VOLUME
A
TONE
SPEAKER
B
SPEAKER
REC OUT
PRE OUT
ATT.
MC
OPERATE
PHONO
DISPLAY
SELECTOR
INPUT
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 10 Adobe PageMaker 6.5J/PPC
11
ENGLISH
ENGLISH
!1 PRE OUT Button
This button turns output from the PRE OUT jack on the
rear panel ON and OFF. When output is ON, the center of
the button is lit a blue color.
!2 REC OUT Button
This button turns the signals output from the RECORDER
1 and 2 OUT jacks on the rear panel ON and OFF. When
output is ON, the center of the button is lit a blue color. For
instructions on how to record, see “RECORDING” on pg.
16.
When RECORDER 1 is selected as the input source, sig-
nals are not output to the RECORDER 1 OUT jack. The
same goes for the RECORDER 2 OUT jack when RE-
CORDER 2 is selected as the input source.
!3 PHONO MC Button
This button switches the phono equalizer between MC and
MM. When MC is set, the center of the button is lit a blue
color. Set the phono equalizer amplifier according to the
type of cartridge you use.
!4 Side Illumination
The side illumination casts a blue light over switches and
buttons. It can be turned ON and OFF from the DISPLAY
button. For instructions on how to operate the side illumi-
nation, see “HOW TO OPERATE THE SIDE ILLUMINA-
TION” on pg. 18.
NAMES AND FUNCTIONS OF PARTS
DISPLAY
!5 Power Indicator
This indicator is lit a blue color while power to the PM-
11S1 is ON.
OPERATE
!6 Display Panel
Approximately 3 seconds after power
to the PM-11S1 is activated, the ID
set for the PM-11S1 is displayed here.
After that, the top line displays the in-
put source selected with either the IN-
PUT SELECTOR knob or the remote
controller, while the bottom line dis-
plays the volume level set with the
VOLUME knob or the remote control-
ler. When the PM-11S1 I is first activated, the attenuation
level (dB) is displayed for the initial volume level.
Volume Level Indication
The display panel also displays left-right level balance and
tone control trimming level. For instructions on how to ad-
just bass and treble, see “How to Trim Bass” and “How to
Trim Treble” on pg. 20.
The display panel also displays messages in response to
PM-11S1 operation.
!7 OPERATE Indicator
This indicator indicates the operating status of the PM-
11S1. When the ID is set to “0” for standalone operation, it
is lit a red color. When multiple PM-11S1s are connected
by FCBS, only the OPERATE indicator of the master PM-
11S1 (ID 1) lights a red color. Slave PM-11S1s whose
OPERATE indicator does not light a red color cannot be
used to operate other units in sync. For more information
on the FCBS, see “ABOUT FCBS” on pg. 17.
Also, the OPERATE indicator flashes if a protective circuit
trips. For troubleshooting procedures, see “TROUBLE-
SHOOTING” on pg. 22.
Max
0.5 dB steps
Min
Turn the VOLUME knob on
the PM-11S1 to the right or
press the VOLUME 3 button
on the remote controller.
Turn the VOLUME knob on
the PM-11S1 to the left or
press the VOLUME 4 button
on the remote controller.
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 11 Adobe PageMaker 6.5J/PPC
12
ENGLISH
ENGLISH
REAR PANEL
NAMES AND FUNCTIONS OF PARTS
A PHONO GND Terminal
Connect the grounding wire from an analog record player
here.
B PHONO Input Jacks
These jacks are for connecting to an analog record player.
Both MC and MM cartridges can be used, therefore set
the PHONO MC button on the front panel according to the
type of cartridge you are using.
In the bi-amp mode, the R channel jack cannot be used.
C BALANCED INPUT Jacks
These jacks are for connecting to the balanced output jacks
of a CD player or D/A converter. With the BALANCED IN-
PUT jacks of the PM-11S1, pin 1 is GND, pin 2 is Cold and
pin 3 is Hot.
In the bi-amp mode, the R channel jack cannot be used.
D CD Input Jacks
These jacks are for connecting to the output jacks of a
Super Audio CD player, CD player, etc.
In the bi-amp mode, the R channel jack cannot be used.
E LINE 1/2 Input Jacks
These jacks are for connecting to the output jacks of a
tuner, DVD player, etc.
In the bi-amp mode, the R channel jack cannot be used.
F RECORDER 1/2 IN Jacks
These jacks are for connecting to the output jacks of a CD-
R, MD deck, tape deck, etc.
In the bi-amp mode, the R channel jack cannot be used.
G RECORDER 1/2 OUT Jacks
These jacks are for connecting to the recording input jacks
of a CD-R, MD deck, tape deck, etc. Output signals can be
turned ON/OFF from the REC OUT button on the front
panel.
In the bi-amp mode, the signals input to the L channel are
output to both output jacks.
H PREOUT Jacks
These jacks are for connecting to the input jacks of an-
other main amplifier or active subwoofer. Output signals
can be turned ON/OFF from the PRE OUT button on the
front panel.
In the bi-amp mode, the signals input to the L channel are
output to both output jacks.
I SPEAKER SYSTEMS Output Terminals
You can connect 2 speaker systems to the PM-11S1.
Speaker output can be turned ON/OFF from the SPEAKER
A and B buttons on the front panel.
In the bi-amp mode, the signals input to the L channel are
output to both output terminals.
J F.C.B.S. IN/OUT Jacks
You can connect and synchronize up to four PM-11S1s in
a complete bi-amp connection or multi-channel connec-
tion. A stereo miniplug or monaural miniplug cable can be
used for the connections. For instructions on use and con-
nections, see “ABOUT FCBS” on pg. 17.
K Operating Mode Switch
This switch is for setting the operating mode of the PM-
11S1.
STEREO: Set to use the PM-11S1 as an ordinary 2-chan-
nel stereo amplifier.
BI-AMP: Set to use two PM-11S1s in a complete bi-amp
connection with FCBS. For more information on the bi-amp
mode, see “ABOUT THE BI-AMP MODE” on pg. 17.
L AC IN Socket
Connect one end of the included power cable here and
the other end to a power outlet. The PM-11S1 can be pow-
ered by 230V AC only.
AC IN
3
1
2
3
1
2
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 12 Adobe PageMaker 6.5J/PPC
13
ENGLISH
ENGLISH
RC-11PMS1 REMOTE CONTROLLER
This remote controller can control the PM-11S1 and Marantz
Super Audio CD players and DVD players that have a remote
control receptor. The operations possible by remote control
may differ with each component, therefore see the instruction
manual that came with the component.
Remote controller buttons are laid out as shown below.
z Input Selector Buttons
These buttons are for selecting the input source to use in
playback.
x TRIM Button
This button starts trimming. When multiple PM-11S1s are
connected by FCBS, this button selects the amplifier with
which to perform trimming.
c EXIT Button
This button ends the trimming mode when trimming is fin-
ished.
v TONE Button
This button turns tone (bass /treble) control ON and OFF.
b ATT Button
This button attenuates volume level with one press.
n Volume Buttons
3 : This button increases the volume level.
4 : This button decreases the volume level.
m DISPLAY Button
This button turns the display ON and OFF.
, Cursor Buttons
In the Trimming Mode
These buttons are for selecting the channel to trim and the
trimming level.
ENTER: This button selects the trim mode (LEVEL. BASS
or TREBLE).
2 /R : This button selects the R channel for trimming.
1 /L : This button selects the L channel for trimming.
3 /+ : This button increases the trimming level.
4 /– : This button decreases the trimming level.
Other Than the Trimming Mode
2, 1, 3, 4 and ENTER: These buttons are for selecting
settings items on menu displays of Marantz DVD players,
etc. For operations of supported Marantz products, see
the tables on the following page and the instruction manual
of the Marantz component.
. Component Operating Buttons
These buttons are for operating Marantz Super Audio CD
players, DVD players, etc. For operations of supported
Marantz products, see the tables on the following page
and the instruction manual of the Marantz component.
NAMES AND FUNCTIONS OF PARTS
L
TRIM
RC-11PMS1
FM/BAM/A
RETURN
TOP MENU
MENU
VOLUME
CLOSE
MODE
PHONO
CD
BALANCED
RECORDER 1
LINE 1
RECORDER 2
LINE 2
EXIT
TONE
ENTER
DISPLAY
ATT
SCAN
RANDOM REPEAT
+
-
OPEN/ SOUND
R
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 13 Adobe PageMaker 6.5J/PPC
14
ENGLISH
ENGLISH
The buttons in groups , and . are for operating Marantz
products other than the PM-11S1, such as Super Audio CD
players and DVD players. The function of each button changes
to match the component selected as the input source from the
input selector buttons z.
When the CD and BALANCED buttons are pressed, the buttons
in groups , and . function as indicated in the below table.
These buttons can be used only when a Marantz Super Audio
CD player is connected to the CD input or BALANCED INPUT
jacks.
Button Function
OPEN/CLOSE Open/Closes disc tray.
SOUND MODE
Selects Super Audio CD sound mode.
Selects Super Audio CD/CD.
33
33
3 Play
44
44
4
Track skip (Returns to track beginning/previous track.)
¢¢
¢¢
¢ Track skip (Advances to next track.)
11
11
1 Rewind search
¡¡
¡¡
¡ Forward search
88
88
8 Pause
77
77
7 Stop
RANDAM Random play
SCAN AMS (Automatic Music Scan) play
REPEAT Repeat play
TOP MENU/AM/A
Not available for use
RETURN/FM/B Not available for use
MENU 1 2 Sets quick replay.
ENTER Starts quick replay.
3 /+ Not available for use
4 /– Not available for use
1 / L Not available for use
2 / R Not available for use
Button Function
OPEN/CLOSE Open/Closes disc tray.
SOUND MODE Changes sound mode.
33
33
3 Play
44
44
4
Track skip (Returns to track beginning/previous track.)
¢¢
¢¢
¢ Track skip (Advances to next track.)
11
11
1 Rewind search
¡¡
¡¡
¡ Forward search
88
88
8 Pause
77
77
7 Stop
RANDAM Random play
SCAN Selects search mode.
REPEAT Repeat play
TOP MENU/AM/A
Displays top menu.
RETURN/FM/B Returns to previous menu
MENU 1 2 Displays menu screen.
ENTER Sets selected item.
3 /+ Moves cursor upward.
4 /– Moves cursor downward.
1 / L Moves cursor to left.
2 / R Moves cursor to right.
When the LINE 2 button is pressed, the buttons in groups ,
and . function as indicated in the below table. These buttons
can be used only when a Marantz DVD player is connected to
the LINE 2 input jacks.
NAMES AND FUNCTIONS OF PARTS
77
77
7 For use of Remote controller
• Loading batteries
Before using the supplied remote control unit for the first
time, load the batteries in the remote control unit. The
batteries provided are used to verify the operations of the
remote control unit only.
1. Remove the battery cover which is found on the back side
of the remote control unit.
2.
Load the two new size “AAA” batteries inside the battery
compartment while taking care to align their polarities correctly
with the polarity markings (
with and with ).
3. Push the cover on the back side in the direction of the arrow
to close.
77
77
7
Operatable range of Remote controller
Operate the remote control unit (RC-11PMS1) within a
distance of approx. 5 m from the infrared signal reception
window (remote sensor) on the front of the PM-11S1.
• Caution
• Do not allow direct sunlight, an inverter fluorescent light or
other strong source of light to shine onto the player’s infrared
signal reception window (remote sensor). Otherwise, the
operation of the remote control unit may be disabled.
• Bear in mind that operating the remote control unit may
cause other devices operated by infrared rays to be
operated by mistake.
• The remote control unit cannot be operated if the space
between the controller and the player’s remote sensor is
obstructed.
• Do not place any objects on top of the remote control unit.
Doing so may cause one or more buttons to be held down
which will cause the batteries to run down.
60°
Approx. 5m
Remote control unit (RC-11PMS1)
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 14 Adobe PageMaker 6.5J/PPC
15
ENGLISH
ENGLISH
PLAYBACK
To explain how to play back input sources, representative
examples are given with an Super Audio CD player and analog
record player. Before starting either procedure, check the
component is correctly connected to the PM-11S1.
77
77
7 Disc Playback on an Super Audio
CD Player
1. Press the power ON/OFF switch of the Super Audio CD
player to activate power to it.
2. Press the POWER ON/OFF switch q of the PM-11S1 to
activate power to it. Approximately 8 seconds after power
has been activated, the muting turns OFF and audio output
is enabled. When using multiple PM-11S1s connected by
FCBS, turn power ON in the order of lowest to highest ID
number, starting from ID 1.
3. Select the input source from the INPUT SELECTOR knob
e on the PM-11S1 or the input selector buttons z of the
remote controller.
4. To use the speakers connected to the SPEAKER A
terminals, press the SPEAKER A button o on the PM-
11S1.
5. Load a disc into the Super Audio CD player and press the
play button to start playback.
6. Adjust the volume level from the VOLUME knob r on the
PM-11S1 or the VOLUME 3/4 buttons n of the remote
controller.
7. Adjust bass/treble as desired from the TONE button i on
the PM-11S1 or the TONE button v of the remote controller.
For instructions on how to adjust bass and treble, see “How
to Trim Bass” and “How to Trim Treble” on pg. 20.
8. You can turn the display and side illumination ON/OFF as
suited for the room environment. Press the DISPLAY button
u on the PM-11S1 or the DISPLAY button m of the remote
controller.
77
77
7 Disc Playback on an Analog
Record Player
1. Press the POWER ON/OFF switch q of the PM-11S1 to
activate power to it. Approximately 8 seconds after power
has been activated, the muting turns OFF and audio output
is enabled. When using multiple PM-11S1s connected by
FCBS, turn power ON in the order of lowest to highest ID
number, starting from ID 1.
2. Select “PHONO” as the input source from the INPUT
SELECTOR knob e on the PM-11S1 or the input selector
buttons z of the remote controller. To prevent unexpected
accidents, it is recommended to set the volume level to –∞
(mute) by turning the VOLUME knob r until muting the
volume level.
3. Set the PHONO MC button !3 on the PM-11S1 to MC or
MM according to the cartridge you are using.
4. To use the speakers connected to the SPEAKER A
terminals, press the SPEAKER A button o on the PM-
11S1.
BASIC OPERATION
5. Set a record on the analog record player and play it.
6. Adjust the volume level from the VOLUME knob r on the
PM-11S1 or the VOLUME 3/4 buttons n of the remote
controller.
7. Adjust bass/treble as desired from the TONE button i on
the PM-11S1 or the TONE button v of the remote controller.
For instructions on how to adjust bass and treble, see “How
to Trim Bass” and “How to Trim Treble” on pg. 20.
8. You can turn the display and side illumination ON/OFF as
suited for the room environment. Press the DISPLAY button
u on the PM-11S1 or the DISPLAY button m of the remote
controller.
INTEGRARED AMPLIFIER PM-11S1
POWER ON/OFF
PHONES
VOLUME
A
TONE
SPEAKER
B
SPEAKER
REC OUT
PRE OUT
ATT.
MC
OPERATE
PHONO
DISPLAY
SELECTOR
INPUT
L
TRIM
RC-11PMS1
FM/BAM/A
RETURN
TOP MENU
MENU
VOLUME
CLOSE
MODE
PHONO
CD
BALANCED
RECORDER 1
LINE 1
RECORDER 2
LINE 2
EXIT
TONE
ENTER
DISPLAY
ATT
SCAN
RANDOM REPEAT
+
-
OPEN/ SOUND
R
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 15 Adobe PageMaker 6.5J/PPC
16
ENGLISH
ENGLISH
RECORDING
This example explains how to record from an input source
such as an Super Audio CD player to a recording device such
as a CD-R.
1. Press the power ON/OFF switch of the Super Audio CD
player and CD-R to activate power to both components.
2. Press the POWER ON/OFF switch q of the PM-11S1 to
activate power to it. Approximately 8 seconds after power
has been activated, the muting turns OFF and audio output
is enabled. When using multiple PM-11S1s connected by
FCBS, turn power ON in the order of lowest to highest ID
number, starting from ID 1.
3. Select the input source from the INPUT SELECTOR knob
e on the PM-11S1 or the input selector buttons z of the
remote controller. And, press the REC OUT button !2 to
turn the recording output of RECORDER 1 and 2 ON.
4. Load a playback disc into the Super Audio CD player and
a recording disc into the CD-R.
5. Start playback on the Super Audio CD player. Then, start
recording on the CD-R.
6. To use the speakers connected to the SPEAKER A
terminals, press the SPEAKER A button o on the PM-
11S1.
7. Adjust the volume level from the VOLUME knob r on the
PM-11S1 or the VOLUME 3/4 buttons n of the remote
controller.
Note
When RECORDER 1 is selected as the input source,
signals are not output to the RECORDER 1 OUT jack. The
same goes for the RECORDER 2 OUT jack when
RECORDER 2 is selected as the input source.
BASIC OPERATION
INTEGRARED AMPLIFIER PM-11S1
POWER ON/OFF
PHONES
VOLUME
A
TONE
SPEAKER
B
SPEAKER
REC OUT
PRE OUT
ATT.
MC
OPERATE
PHONO
DISPLAY
SELECTOR
INPUT
L
TRIM
RC-11PMS1
FM/BAM/A
RETURN
TOP MENU
MENU
VOLUME
CLOSE
MODE
PHONO
CD
BALANCED
RECORDER 1
LINE 1
RECORDER 2
LINE 2
EXIT
TONE
ENTER
DISPLAY
ATT
SCAN
RANDOM REPEAT
+
-
OPEN/ SOUND
R
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 16 Adobe PageMaker 6.5J/PPC
17
ENGLISH
ENGLISH
HOW TO USE AND SET FEATURES
ABOUT FCBS
FCBS is short for Floating Control Bus System. It is a
communication system that connects up to four PM-11S1s
over a dedicated bus line so as to enable synchronized
operations amongst them via 2-way data communications.
The FCBS connections can be made with either of the below
two types of portable audio connection cable. Prepare the
number of connection cables for the number of PM-11S1s to
connect.
• Connection cable with monaural ⇔ monaural miniplugs
• Connection cable with stereo ⇔ stereo miniplugs
Resistor connection cables are sold commercially, but they
cannot be used with the PM-11S1.
The below figure is an example of four PM-11S1s connected
by FCBS. The top PM-11S1 is the master unit of ID 1 and
controls the three slave units of IDs 2 - 4. When the master
PM-11S1 is operated, the input source, volume level, ATT
feature, display and tone control ON/OFF feature of slave PM-
11S1s are interlocked to the master unit.
This function can be applied to various usages such as
complete-bi-amp with 2 PM-11S1s, and 5.1ch multi-channel
with 3 PM-11S1s.
To turn power to multiple FCBS-connected PM-11S1s ON/
OFF, activate power in the order of lowest to highest ID
number and deactivate power in order of highest to lowest
ID number.
ABOUT THE BI-AMP MODE
The PM-11S1 is equipped with a bi-amp mode to enable a
complete bi-amp connection using two PM-11S1s. This
complete bi-amp connection is a high-end technique for
enhancing sound quality, proposed by Marantz. With it, the bi-
amp supporting speaker system is separated from the
preamplifiers that separately drive the low and high speakers.
(For more information, see Connection Example 3.)
The bi-amp mode is engaged by setting the operating mode
switch on the rear panel to “BI-AMP”.
In the bi-amp mode, the signals input to the L channel are
passed through the input buffer amplifier, split by the input
selector and transferred to the left and right volume amplifiers.
After that, the signals are sequentially sent to the left and right
voltage amplifiers and the left and right power amplifiers, and
ultimately output to the speaker output terminals. In the bi-
amp mode, the R channel input jacks cannot be used.
The below figure shows example displays in the stereo and
bi-map modes.
Stereo mode Bi-amp mode
Note
Turn power to the PM-11S1 OFF before changing the
operating mode switch setting. Turning the power ON again
activates the new setting.
Master PM-11S1
... ID 1
Slave PM-11S1
... ID 2
Slave PM-11S1
... ID 4
Slave PM-11S1
... ID 3
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 17 Adobe PageMaker 6.5J/PPC
18
ENGLISH
ENGLISH
ATTENUATION (ATT)
Attenuation is a one-touch feature for reducing volume level.
When the ATT button on either the PM-11S1 or the remote
controller is pressed, the volume level is attenuated. When the
PM-11S1 is shipped from the factory, the attenuation level is
set to –20 dB, but it can be set to –20 dB, -40 dB or -∞.
1. When the ATT button on either the PM-11S1 or the remote
controller is pressed, “ATT” flashes on the display and the
volume level is reduced. When the ATT button is pressed
again or the volume is increased/decreased from the
controls, the mode is canceled and the original volume
level is restored.
2. When the volume level is at -∞ (muted) and the ATT button
is pressed, the below display appears for about 3 seconds
and attenuation is not applied.
77
77
7 How to Set Attenuation Level
Attenuation level cannot be set from the remote controller.
1. Press and hold the ATT button on the PM-11S1 for 2
seconds or longer.
The attenuation level will appear on the display.
HOW TO USE AND SET FEATURES
2. Set the attenuation level. The setting changes with each
press of the ATT button on the PM-11S1.
3. When the desired attenuation level setting appears on the
display, leave it unchanged for 2 seconds or longer to enter
the setting. Once entered, the display returns to the volume
level indication.
HOW TO OPERATE THE SIDE
ILLUMINATION
The side illumination has an always-ON mode and an always-
OFF mode. In the always-ON mode, the side illumination turns
ON/OFF in sync with the display.
1. With the side illumination lit, press and hold the DISPLAY
button for 3 seconds or longer. The side illumination goes
out and the always-OFF mode is engaged.
2. To cancel the always-OFF mode and turn the side
illumination ON, press and hold the DISPLAY button for 3
seconds or longer.
INTEGRARED AMPLIFIER PM-11S1
POWER ON/OFF
PHONES
VOLUME
A
TONE
SPEAKER
B
SPEAKER
REC OUT
PRE OUT
ATT.
MC
OPERATE
PHONO
DISPLAY
SELECTOR
INPUT
DISPLAY button
ATT button
Side illumination
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:37 PMPage 18 Adobe PageMaker 6.5J/PPC
19
ENGLISH
ENGLISH
TRIMMING
There are three trimming modes.
• LEVEL trimming that adjusts the volume level on left and
right channels
• BASS trimming that adjusts the bass on left and right
channels
• TREBLE trimming that adjusts the treble on left and right
channels
Note
Trimming is performed from the remote controller.
TRIM : This button starts trimming. When multiple PM-
11S1s are connected, this button selects the
amplifier with which to perform trimming. In such
case, trimming is performed in the order of the lowest
to highest ID number.
EXIT : This button ends trimming.
3 : This button increases the trimming level.
4 : This button decreases the trimming level.
2 : This button selects the R channel for trimming.
1 : This button selects the L channel for trimming.
ENTER: This button selects the trim mode (LEVEL, BASS or
TREBLE).
HOW TO USE AND SET FEATURES
77
77
7 How to Trim Volume Level
The volume level of the left and right channels can be trimmed
in 0.5 dB steps across a 0.0 - -9.0 dB range. When the PM-
11S1 is shipped from the factory, the volume level is set to 0.0
dB (maximum).
1. Press the TRIM button once to access the LEVEL trimming
mode.
2. The flashing “0.0” on the left indicates that trimming is
activated for the left channel volume level. Press the 3
and 4 buttons to set the volume level of the left channel.
3. Press the 2 button to set the right channel volume level.
When the right side “0.0” starts flashing, trimming is
activated for the right channel volume level. Press the 3
and 4 buttons to set the volume level of the right channel.
4. To trim the volume level of the ID 2 (slave) PM-11S1, press
the TRIM button again and set volume level as in steps 1 - 3.
After that, pressing the TRIM button again allows you to
trim volume level with ID 3 (slave) PM-11S1 and so forth.
5. When finished with volume level trimming, press the EXIT
button.
L
TRIM
RC-11PMS1
FM/BAM/A
RETURN
TOP MENU
MENU
VOLUME
CLOSE
MODE
PHONO
CD
BALANCED
RECORDER 1
LINE 1
RECORDER 2
LINE 2
EXIT
TONE
ENTER
DISPLAY
ATT
SCAN
RANDOM REPEAT
+
-
OPEN/ SOUND
R
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:37 PMPage 19 Adobe PageMaker 6.5J/PPC
20
ENGLISH
ENGLISH
77
77
7 How to Trim Bass
The bass level of the left and right channels can be trimmed in
2 dB steps across a -8.0 - +8.0 dB range. When the PM-11S1
is shipped from the factory, the bass level is set to 0 dB. To trim
the bass level, activate tone control by pressing the TONE
button on either the PM-11S1 or the remote controller.
1. Press the TRIM button once to access the LEVEL trimming
mode.
2. Press the ENTER button once to access the BASS
trimming mode.
3. The flashing “0” on the left indicates that trimming is
activated for the left channel bass level. Press the 3 and 4
buttons to set the bass level of the left channel.
4. Press the 2 button to start the “0” on the right side flashing.
When the right side “0” starts flashing, trimming is activated
for the right channel bass level. Press the 3 and 4 buttons
to set the bass level of the right channel.
5. To trim the bass level of the ID 2 (slave) PM-11S1, press
the TRIM button again and set bass level as in steps 1 - 3.
After that, pressing the TRIM button again allows you to
trim bass level with ID 3 (slave) PM-11S1 and so forth.
6. When finished with bass level trimming, press the EXIT
button.
HOW TO USE AND SET FEATURES
77
77
7 How to Trim Treble
The treble level of the left and right channels can be trimmed
in 2 dB steps across a -8.0 - +8.0 dB range. When the PM-
11S1 is shipped from the factory, the treble level is set to 0 dB.
To trim the treble level, activate tone control by pressing the
TONE button on either the PM-11S1 or the remote controller.
1. Press the TRIM button once to access the LEVEL trimming
mode.
2. Press the ENTER button twice to access the TREBLE
trimming mode.
3. The flashing “0” on the left indicates that trimming is
activated for the left channel treble level. Press the 3 and
4 buttons to set the treble level of the left channel.
4. Press the 2 button to start the “0” on the right side flashing.
When the right side “0” starts flashing, trimming is activated
for the right channel treble level. Press the 3 and 4 buttons
to set the treble level of the right channel.
5. To trim the treble level of the ID 2 (slave) PM-11S1, press
the TRIM button again and set treble level as in steps 1 - 3.
After that, pressing the TRIM button again allows you to
trim treble level with ID 3 (slave) PM-11S1 and so forth.
6. When finished with treble level trimming, press the EXIT
button.
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:37 PMPage 20 Adobe PageMaker 6.5J/PPC
21
ENGLISH
ENGLISH
HOW TO ADJUST DISPLAY CONTRAST
An LCD is used as the PM-11S1’s display. You can set the
contrast in the +8 - -8 range. When the PM-11S1 is shipped
from the factory, the contrast level is set to 0. The contrast
adjustment mode is accessed by activating power from the
POWER ON/OFF button while pressing and holding the
DISPLAY button. Contrast is then set by turning the INPUT
SELECTOR knob to the desired setting.
1. While pressing and holding the DISPLAY button, press the
POWER ON/OFF button.
2. Turn the INPUT SELECTOR knob to the desired contrast
setting.
3. When finished setting the display contrast, turn power to
the PM-11S1 OFF. The setting is stored in memory and
becomes active the next time power to the PM-11S1 I
activated.
HOW TO USE AND SET FEATURES
HOW TO SET ID
If using the PM-11S1 by itself as a stereo amplifier, set the ID
to “0”. When the PM-11S1 is shipped from the factory, the ID is
set to “0”.
When the ID is set to a number other than “0”, the PM-
11S1 cannot be used for standalone operation.
The ID number of the PM-11S1 appears on the display for
about 3 seconds after power is activated.
When multiple PM-11S1s are connected, a unique ID number
must be set for each one in order to distinguish between them.
The PM-11S1 that centrally controls the other PM-11S1s takes
ID 1. The PM-11S1 with ID 1 is called the “master”. The other
PM-11S1s that synchronize with the master are called “slaves”
and take IDs “2” - “4”. ID numbers must not be the same for
any two units.
Set ID numbers as follows.
1. While pressing and holding the DISPLAY button, press the
POWER ON/OFF button.
2. Press the DISPLAY button once.
3. Turn the INPUT SELECTOR knob to the desired ID number.
When finished setting the ID number, turn power to the PM-
11S1 OFF. The setting is stored in memory and becomes active
the next time power to the PM-11S1 activated.
INTEGRARED AMPLIFIER PM-11S1
POWER ON/OFF
PHONES
A
TONE
SPEAKER
B
SPEAKER
OPERATE
DISPLAY
SELECTOR
INPUT
INPUT SELECTOR knob DISPLAY button
POWER ON/OFF button
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:37 PMPage 21 Adobe PageMaker 6.5J/PPC
22
ENGLISH
ENGLISH
If you experience trouble with the PM-11S1, make the below
checks before thinking the worst. Improper operation can cause
the PM-11S1 to behave in a way that makes you think
something is wrong with the equipment when actually not. If
the trouble cannot be fixed after making the below checks,
contact the place of purchase, your nearest Marantz dealer,
our customer service center or our repair service center.
* Power does not turn ON.
1. Is the power cable securely plugged into a power outlet?
2. If the OPERATE indicator on the display is flashing a red
color, a protective circuit has tripped. Shut power OFF, wait
a few minutes and then reactivate the power.
* Nothing is heard from the speakers.
1. Aren’t the SPEAKER A and B buttons on the front panel in
the OFF position?
2. Isn’t the attenuation feature (ATT) active?
3. Isn’t there trouble in the input source selected from the
INPUT SELECTOR knob on the front panel?
4. Are you using the player (replaying device) correctly?
5. Are connection cables and speaker cables securely
connected?
6. Volume may have been muted by a protective circuit that
tripped. Try adjusting the volume level again.
7. If an error message is displayed, correctly set the ID number
as indicated in the table under “Error Messages”.
* Volume level differs between left and right
channels.
Volume, bass and treble level may be trimmed differently for
the left and right channels. Try trimming again.
* Stereo sound is not heard from the speakers.
The operating mode switch on the rear panel may be set to
“BI-AMP”. Shut power OFF, set the switch to “STEREO” and
then reactive the power. Power must be activated after the
operating mode switch is set for the setting to be active.
* Record player audio is not heard or contains
a lot of noise.
1. Is the PHONO MC button on the front panel set to the type
of cartridge you are using?
2. Are connection cables securely connected?
3. Is the grounding wire from the record player connected to
the PHONO GND terminal?
4. Is the cartridge properly connected to the tone arm?
TROUBLESHOOTING
77
77
7 About Protective Circuits
The PM-11S1 is equipped with protective circuits to protect
the amplifier circuits and speaker system against damage. If a
protective circuit trips, the sound is instantly muted. In this case,
either “PROTECT” flashes on the display or the display panel
goes out and the OPERATE indicator on the display flashes a
red color.
• At Power ON
For about 8 seconds after power is activated, a protective circuit
trips and mutes the sound to give amplifier circuits time to
stabilize. Once the amplifier circuits stabilize, the protective
circuit releases and audio is enabled.
• In the Event of Overcurrent
A protective circuit trips if current of a certain level is detected,
which can happen if excessive signal flow is input to the
amplifier or if the PM-11S1 is connected to a speaker system
of less than 4 Ω impedance. A protective circuit can also trip if
a speaker cable accidentally shorts. In these cases,
“PROTECT” flashes on the display and, approximately 8
seconds later, the sound is automatically muted and the
protective circuit is released. Therefore, readjust the volume
level to resume normal use.
If overcurrent is detected because of trouble with the amplifier,
the OPERATE indicator on the display flashes a red color and
power shuts OFF.
• If Strong Bass Signals Are Input
A protective circuit trips if bass signals of an excessive level
are detected. In this case, “PROTECT” flashes on the display
and, approximately 8 seconds later, the sound is automatically
muted and the protective circuit is released. Readjust the
volume level to resume normal use. If these strong bass signals
continue or if excessive DC voltage is detected because of
trouble with the amplifier, the OPERATE indicator on the display
flashes a red color and power shuts OFF.
• If the Power Amplifier Overheats
A protective circuit trips if the temperature of the main amplifier
rises above a certain level, which can happen if excessive
signal flow is continually input into the amplifier. Temperature
can also exceed the trip level of the protective circuits if the
vents on the top of the PM-11S1 are covered or if the PM-
11S1 is installed on a cramped audio rack. In these cases,
“PROTECT” flashes on the display and, when the temperature
inside the unit lowers, the sound is automatically muted and
the protective circuit is released. Readjust the volume level to
resume normal use. If the temperature does not sufficiently
lower within a certain amount of time after the protective circuit
trips, the OPERATE indicator on the display flashes a red color
and power shuts OFF.
• In the Event of Amplifier Trouble
A protective circuit trips and automatically shuts OFF the power
if abnormal voltage is detected in the power circuit for whatever
reason. The same happens if the main fuse inside the amplifier
blows. In these cases, the OPERATE indicator on the display
flashes a red color.
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:37 PMPage 22 Adobe PageMaker 6.5J/PPC
23
ENGLISH
ENGLISH
77
77
7 Error Messages
When multiple PM-11S1s are connected by FCBS, the below
error messages may appear on the display. In these cases,
there is a problem with the ID number setting or remote cable
connection. Check the ID numbers and remote cable as
indicated in the below table. For details on how to set ID
numbers, see “How to Set ID” on pg. 21.
TROUBLESHOOTING
Error
message
Meaning
1
ERROR 02
ID 2 is used with
more than one amp.
2
ERROR 03
ID 3 is used with
more than one amp.
3
ERROR 04
ID 4 is used with
more than one amp.
4
ERROR 11
Amps of IDs 2 - 4
cannot communi-
cate with ID 1 amp.
5
ERROR 12
ID 1 amp cannot
communicate with
amps of IDs 2 - 4.
What to do
Set separate ID
numbers for each amp.
If power to ID 1 amp is
OFF, activate power.
Check remote cable is
properly connected.
If ID 1 is used for more
than one amp, properly
set ID numbers. Check
remote cable is properly
connected.
OTHERS
The section describes the care and maintenance tasks that
must be performed to optimize the operation of your Marantz
equipment.
77
77
7
Cleaning of equipment external surfaces
The exterior finish of your unit will last indefinitely with proper
care and cleaning, Never use scouring pads, steel wool,
scourging powders or harsh chemical agents (e.g., lye
solution), alcohol, thinner, benzine, insecticide or other volatile
substances as these wil mar the finish of the equipment.
Likewise, never use cloths containing chemical substances. If
the equipment get dirty, wipe the external surfaces with a soft,
lint-free cloth.
If the equipment becomes heavily soiled:
• dilute some washing up liquid in water, in a ratio of one
part detergent to six parts water.
• dip a soft, lint free in the solution and wring the it is damp.
• wipe the equipment with the damp cloth.
• dry the equipment by wiping it with a dry cloth.
77
77
7 Repairs
Only the most competent and qualified service technicians
should be allowed to service the factory-trained warranty station
personnel have the knowledge and special facilities needed
for repair and calibration of this precision equipment. After the
warranty period has expired, repairs will be performed for a
charge if the equipment can be returned to normal operation.
In the event of difficulty, refer to your dealer or write directly to
the nearest location to you that is listed on the Marantz
Authorized Service Station list. If writing, please include the
model and serial number of the equipment together with a full
description of what you think is abnormal about the equipment's
behaviour.
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:37 PMPage 23 Adobe PageMaker 6.5J/PPC
24
ENGLISH
ENGLISH
Power output (20 Hz – 20 kHz simultaneous drive of both channels)
.................................................... 100W x 2 (8Ω load)
.................................................... 200W x 2 (4Ω load)
Total frequency distortion (20Hz – 20kHz simultaneous drive
of both channels, 8Ω load) .......................................... 0.01%
Output band width (8Ω load, 0.05%) .................. 5Hz ~50kHz
Frequency response (CD, 1W, 8Ω load) ..... 5Hz ~ 120kHz±3dB
Dumping factor (8Ω load, 20Hz – 20kHz) ....................... 100
Input sensitivity/Input impedance
PHONO (MC) .............................................. 270µV/100Ω
PHONO (MM) ..................................................3mV/47kΩ
BALANCED ............................................... 240mV/20kΩ
CD/LINE .................................................... 240mV/20kΩ
Output voltage/Output impedance
PRE OUT ...................................................... 1.9 V/220Ω
Maximum allowed PHONO input (1kHz)
MC .......................................................................... 12mV
MM ....................................................................... 130mV
RIAA deviation (20Hz ~ 20kHz) ............................ ±0.5dB
S/N (IHF-A, 1W, 8Ω load)
PHONO (MC) ................................... 76dB (0.5mV input)
PHONO (MM) ...................................... 90dB (5mV input)
BALANCED ..................................... 95dB (500mV input)
CD/LINE .......................................... 96dB (500mV input)
SPECIFICATIONS & DIMENSIONAL DRAWINGS
Tone control
Bass (50Hz) ............................................................. ±8dB
Treble (20kHz) ......................................................... ±8dB
Power requirement ......................................... AC 230V 50Hz
Power consumption
(EN60065) .............................................................. 380W
(4Ω, 200W x 2 output) ............................................ 880W
Accessories
Remote controller .......................................................... 1
AAA batteries ................................................................ 2
Detachable AC power cable .......................................... 1
Maximum outer dimensions (Amp)
Width ................................................................... 440mm
Height .................................................................. 165mm
Depth ................................................................... 444mm
Weight (Amp) .............................................................. 26.0kg
INTEGRARED AMPLIFIER PM-11S1
POWER ON/OFF
PHONES
VOLUME
A
TONE
SPEAKER
B
SPEAKER
REC OUT
PRE OUT
ATT.
MC
OPERATE
PHONO
DISPLAY
SELECTOR
INPUT
419
43
165
440
25
19
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:37 PMPage 24 Adobe PageMaker 6.5J/PPC
Printed in Japan
is a registered trademark.
www.marantz.com
You can find your nearest authorized distributor or dealer on our website.
JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
08/2004 00M04AJ851310 ecms-b
… 11 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Marantz-PM-11S1

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz PM-11S1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz PM-11S1 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info