English / Page 16
LED CH1 'Loop occupied':
As long as the detector registers a vehicle on the 1st loop (channel 1), the red LED
stays on.
LED CH2 'Loop occupied':
As long as the detector registers a vehicle on the 2nd loop (channel 2), the red LED
stays on.
Description of the programming switches
Programming switches SW 1 and SW2
The frequency range of the loop can be roughly set via the programming switches SW1
and SW2. The precise frequency is set automatically on self-adjustment of the loop.
The following applies:
Programming switches SW3 and SW4
The sensitivity of the detector (channel 1) can be set via the programming switches SW3
and SW4. The following applies:
0,5%
0,5 %
0,1%
0,02%
Programming switches SW5 and SW6
The sensitivity of the detector (channel 2) can be set via the programming switches SW5
and SW6. The following applies:
0,5%
0,5 %
0,1%
0,02%
2. Description of function
OFF OFF High
OFF ON
ON OFF
ON ON Low
SW 1 SW 2 Frequency
OFF OFF Low
OFF ON
ON OFF
ON ON High
SW 3 SW 4 Sensitivity
OFF OFF Low
OFF ON
ON OFF
ON ON High
SW 5 SW 6 Sensitivity
passenger car ›1,0%
motor lorry 0,40%
motorbike 0,12%
bicycle 0,02%
vehicle ∆L/L
passenger car ›1,0%
motor lorry 0,40%
motorbike 0,12%
bicycle 0,02%
vehicle ∆L/L
