Manual for installation and operation, Comfort 870 GB (#81125) 37
8. Initial operation
Photocell or the CESD has been interrupted
Gate moving towards OPEN position
Gate in OPEN position
Gate is at intermediate position
Gate moving towards CLOSED position
Gate in CLOSED position
Reference point is switched
Permanent actuation of an external control
element
Remote control is actuated
Operating voltage
LED displays in operating mode
Legend:
LED off
LED on
LED flashes slowly
LED pulses
LED flashes quickly
Factory default setting
Not possible –
8.4 Reference point
In operating mode, LED 5 lights up briefly
when an object/person passes the reference
point.
Advice:
In the factory default setting and after
a reset, the controls are set to start in
the CLOSED gate position.
To ensure trouble-free programming,
therefore, the gate and the operator
system must be in the CLOSED end
position before resetting or carrying out
the express programming procedure.
8.3 Overview of the display functions