12 Operating Instructions, Comfort 580 GB (#91636)
6. Installation
• Close the foundation box (A) with the cover plate (E).
• Seal the cover plate (E) using self-adhesive tape.
6.2 / 3
A
E
• Infill the space surrounding the foundation box with
concrete.
6.2 / 4
Advice:
To ensure that the motor unit functions
properly, the foundation box must not
be allowed to change position during
concreting.
• Check that the foundation box is horizontal.
• Allow the foundation concrete to set.
• Remove the self-adhesive tape and the cover plate (E).
• Remove the spacer cylinder (D).
6.2 / 5
Attention!
To prevent damage to the foundations
occurring and the drive position from
slipping, the foundation block must
have set completely before the next
step is carried out.
D
E