English Page 66
G. Display functions and programming possibilities
5. Programming of '3-min. light / signal light'
LED 5 flashes.
• When actuating the button 팬 or 팫
the function "3-min light / signal light"
can be set (according to table):
LED 1 flashes:
The function "3-min. light" is selected.
LED 1 glows:
The function "signal light" is selected.
• Save the setting with programming
button 쒊.
The programming of the extended operator
functions is terminated, recognizable by
all LEDs going off in the sequence 8 - 1.
The control unit is in operation mode
(in case of power failure all settings
remain unchanged).