15434
36
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
CAUTION
• As long as a cable release remains attached to
the Mirror Lock-up Socket, the camera is set for
mirror lock-up operation.
Consequently, it will not be possible to take a
photography by merely pressing the shutter
release button.
• It the red line around the Mirror Lock-up Socket
is still visible when the cable release is removed,
the camera is still set for mirror lockup operation.
If such is the case, reattach the cable release,
making sure that the socket retracts as you
remove it once again.
• The shutter should be released with the cable
release within 55 seconds of pressing the Shutter
Release Button. If this is not done, the alarm will
sound after 55 seconds later and continue for 5
seconds before stopping.
• If you release the shutter with the cable release
after the alarm stops (approx. 60 seconds), the
shutter speed will be 1/400sec. If you wish to use
a shutter speed other than 1/400 sec. after the
buzzer stops, follow the procedure for multiple
exposure in the steps given below.
1. Set the R-M lever to "M" (multiple
exposure),and press down the cocking lever.
2. Set the shutter speed dial to a desired speed
and perform "mirror lock-up".
3. Reset the R-M lever to its normal position.
Attaching Flash Units
Compact, clip-on units can be attached
directly to the Hot-Shoe of the camera.
When using large, grip-type units, attach
the sync cord of the flash to the Flash Sync
Terminal (X-sync) of the lens.
• When the Mamiya MZ36R Flash is used, a
green monitor lamp will glow, indicating that
battery charging has been accomplished.
Determining the Aperture
When using automatic flash units, refer to
the instructions of the particular flash units for
the correct apertures to use.
When using a manual electronic flash unit
or flash bulbs, the guide number (G.N)
divided by the subject distance gives the
correct aperture to use.
NOTE:
Flash time, recharging time and synchro
polarity differ depending on the type of flash
unit. Check performance by taking test
photographs.
34
Using a Tripod
For optimum quality, use of a large, sturdy
tripod is recommended.
The Tripod Socket will accept standard
size (U 1/4" thread) tripod screws without
modification. Simply attach the RZ 67 as you
would any other camera with standard
threads.
When using a tripod with a 3/8" screw, first
remove the small screw in the base of the
Tripod Socket of the camera by rotating it
counterclockwise with an appropriately sized
screwdriver. Next, use a coin to remove the
1/4" adapter “A” from the Tripod Socket by
rotating it counterclockwise. The camera can
then be mounted on a 3/8" screw tripod.
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mamiya RZ67proII bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mamiya RZ67proII in de taal/talen: Engels als bijlage per email.

De handleiding is 1,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info