15434
20
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
Using the Release Button Collar
1. For normal operation, align the white square
“B” on the Release Button Collar “A” with the
white dot on the lever below ”B”. When this is
done, the Shutter Release functions electro-
magnetically and the various safety mecha-
nisms operate electrically.
2. When the camera is not in use, lock the
Shutter Release Button. This is done by align-
ing the white dot of the Release Button Collar
with the red dot “C” on the camera body. By
locking the Shutter Release Button, you not
only prevent unintentional exposure of film,
but also prevent accidental battery depletion
caused by pressure on the Release Button.
For this reason, be sure to lock the Release
Button when carrying the camera in a bag.
*Emergency Shutter Operation
If you were to suddenly find yourself with a
dead battery in the midst of a photographic
session, switch over to the emergency shutter
operation mode. In order to do so, push the
Collar Stop lever “D” toward the camera body
and while holding it there align the white dot of
the Release Button Collar with the orange dot
“E” on the camera body. The shutter will now
operate (even without a battery) at approxi-
mately 1/400 sec., regardless of the setting of
the Shutter Speed Dial.
Because electricity is not being used in the
emergency shutter operation mode, the
Monitor Lamps in the viewfinder will not
illuminate. Moreover, even if the Dark Slide is
not withdrawn, the shutter can still be
released, so exercise care.
18
The R-M Lever
The Normal Position ()
For normal operation of the camera, the R-M
Lever should be kept in the center position,
aligned with the index mark. Setting the lever
to this position activates the double exposure
prevention mechanism so that photo after
photo can be taken without fear of accidental
double exposures.
Multiple Exposure Position
When desiring to make multiple exposures,
set the R-M Lever to the 'M' position. When
this is done, pushing down on the Cocking
Lever will cock the lens shutter, but will not
advance the film. Upon completion of the
multiple exposure, do not forget to return the
R-M Lever to its normal (center) position. The
lever can also be set to 'M' when testing the
shutter without film in the camera.
Revolving Back Position
Before revolving the back, set the R-M Lever
to the "R" position. After this is done, the lever
will automatically return to the normal position
when the Shutter Release Button or Cocking
Lever is next used.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mamiya RZ67proII bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mamiya RZ67proII in de taal/talen: Engels als bijlage per email.

De handleiding is 1,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info