Handleiding Makita UM603D (pagina 10 van 100) (Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens)

690689

Verklein

Vergroot

Pagina terug

1/100

Pagina verder

10 ENGLISH

WARNING:

Thevibrationemissionduringactual

useofthepowertoolcandifferfromthedeclaredemission

value depending on the ways in which the tool is used.

WARNING:Besuretoidentifysafetymeasures

toprotecttheoperatorthatarebasedonanestima-

tionofexposureintheactualconditionsofuse(taking

accountofallpartsoftheoperatingcyclesuchas

thetimeswhenthetoolisswitchedoffandwhenitis

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool.Failuretofollowallinstructionslistedbelow

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Cordless Grass Shear Safety

Warnings

General instructions

1. To ensure correct operation, user has to read

this instruction manual to make himself famil-

iar with the handling of the equipment.Users

insufcientlyinformedwillriskdangertothem-

selves as well as others due to improper handling.

Never allow children, persons with reduced phys-

ical, sensory or mental capabilities or lack of

experience and knowledge or people unfamiliar

with these instructions to use the machine, local

regulations may restrict the age of the operator.

Use the equipment with the utmost care and attention.

Operate the equipment only if you are in good

physical condition. Perform all work calmly and

carefully. Use common sense and keep in mind that

the operator or user is responsible for accidents or

hazards occurring to other people or their property.

5. Never operate the machine while people, espe-

cially children, or pets are nearby.

The motor is to be switched off immediately in case that

the equipment shows any problem or abnormal sign.

Switch off and remove the battery cartridge when

resting and when leaving the equipment unat-

tended, and place it in a safe location to prevent

danger to others or damage to the equipment.

Avoid using the machine in bad weather condi-

tions especially when there is a risk of lightning.

Personal protective equipment

1. Wear eye protection and stout shoes at all

times while operating the machine.

2. Always wear substantial footwear and long

trousers while operating the machine.

Starting up the equipment

Make sure that there are no children or other people

nearby, also pay attention to any animals in the

working vicinity.Otherwisestopusingtheequipment.

Before use always check that the equipment is

safe for operation. Check the security of the cut-

ting tool and the guard and the switch trigger/lever

for easy and proper action. Check for clean and

dry handles and test the function of the start/stop.

Check damaged parts before further use of the

equipment. A guard or other part that is dam-

aged should be carefully checked to determine

that it will operate properly and perform its

intended function. Check for alignment of mov-

ing parts, binding of moving parts, breakage of

parts, mounting, and any other condition that

may affect its operation. A guard or other part

that is damaged should be properly repaired

or replaced by our authorized service center

unless indicated elsewhere in this manual.

4. Switch on the motor only when the hands and

feet are away from the cutting tool.

5. Before starting make sure that the cutting tool

has no contact with any objects.

Method of operation

1. Only use the equipment in good light and

visibility. During the winter season beware

of slippery or wet areas, ice and snow (risk

of slipping). Always ensure a safe footing on

slopes and be sure to walk and never run.

2. Take care against injury to feet and hands from

the cutting tool.

Never stand on a ladder and run the equipment.

4. Never climb up into trees to perform cutting

operation with the equipment.

5. Never work on unstable surfaces.

Remove sand, stones, nails etc. found within the

working range. Foreign particles may damage the

cuttingtoolandcancausedangerouskick-backs.

7. Should the cutting tool hit stones or other hard

objects, immediately switch off the motor and

inspect the cutting tool.

8. Inspect the cutting tool at short regular inter-

vals for damage (detection of hairline cracks

by means of tapping-noise test).

9. Before commencing cutting, the cutting tool

must have reached full working speed.

10.

The cutting tool has to be equipped with the

appropriate guard. Never run the equipment with

damaged guards or without guards in place!

11.

All protective installations and guards supplied with

the equipment must be used during operation.

12. Always remove the battery cartridge from the

equipment:

—

whenever leaving the equipment unattended;

— before clearing a blockage;

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Makita UM603D Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info