448668
8
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
8
21
20
22
23
24
Transport and storage
- Carry the electric chain saw with the tubular handle. The
saw bar indicates backwards. Never carry or transport
the electric chain saw with the chain running.
- Never carry the saw by the power cord. Do not disconnect
the plug by pulling on the power cord.
- When changing your position during work switch of the
electric chain saw and actuate the chain brake in order to
prevent an inadvertent start of the chain.
- When transporting the electric chain saw over long distances
the power supply plug must be pulled out and the bar
protection cover, included in the delivery, must be applied
(20).
- Ensure safe positioning of the electric chain saw during car
transportation to avoid oil leakage.
- Store the saw in a secure, dry, lockable room out of reach
of children. It must not be stored outdoors.
- For storing the electric chain saw over a long period of time
or shipping it the oil tank must be completely emptied.
- Only use approved and marked containers for transporting
and storing chain oil.
Maintenance
- For performing maintenance works switch of the electric
chain saw, pull out the power supply plug and secure
it (21).
- Before starting to work, always make sure that the saw is in
safe working order, in particular the chain brake and run-
out brake. Make sure that the saw chain is always sharpened
and tightened correctly (22).
- Have the chain brake and run-out brake inspected regularly
(see Chain brake, run-out brake).
- Regularly check the cable to the power supply for damage
of the covering.
- Regularly clean the electric chain saw.
- If the plastic case is damaged, have it immediately repaired
by a skilled person.
- Regularly check the tank cap for tightness.
- Do not use the saw if the ON/OFF switch is defective. Have
it repaired by a qualified person.
Observe the accident prevention instructions issued
by the competent trade federations and insurance
companies.
Do not perform any modifications on the electric chain
saw. You will endanger your safety.
Perform only the maintenance and repair works described
in the instruction manual. All other works must be carried
out by the MAKITA service.
Use only original MAKITA spare parts and accessories.
Applying spare parts which are not original MAKITA parts
or accesories and bar/chain combinations or lengths results
in a high risk of accidents. For accidents and damage
resulting from using sawing devices or accesories which
have not been approved we cannot accept any responsibility.
First aid
For the event of a possible accident, please, make sure that
a first aid box is always immediately available close by.
Immediately replace any items used from the first aid box.
Should you ask for help, please, give the following
information:
- place of accident
- what happened
- number of injured persons
- kind of injuries
- your name.
NOTE
Individuals with poor circulation who are exposed to excessive
vibration may experience injury to blood vessels or the nervous
system.
Vibration may cause the following symptoms to occur in the
fingers, hands or wrists: Falling asleep (numbness), tingling,
pain, stabbing sensation, alteration of skin colour or of the skin.
If any of these symptoms occur, see a physician!
SERVICE
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita UC 3001A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita UC 3001A in de taal/talen: Engels als bijlage per email.

De handleiding is 1,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Makita UC 3001A

Makita UC 3001A Gebruiksaanwijzing - Deutsch - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info