598974
16
Verklein
Vergroot
Pagina terug
1/98
Pagina verder
16
Adding grease and lubricant
- The gearbox of the pole hedge trimmer should be greased every 20 working
hours. Add approx. 10cc of lubricant (Shell Alvania No. 3 or equivalent) to the
gearbox via the grease nipples. (Some grease will emerge from the head of the
gearbox (located at the base of the blade) when the pole hedge trimmer is set in
motion the first time after greasing. Use this as a rough indicator for the amount
of grease to supply.)
Note: Observe greasing intervals and the amount of grease to be supplied.
Mechanical parts of the pole hedge trimmer may be damaged if grease is
not supplied at the prescribed intervals or if an insufficient amount of
grease is added.
Fuel tank filter
- The inside of the fuel tank is equipped with a filter (1) that cleans the fuel before
it enters the carburetor.
- Visually check the filter at regular intervals. To do so, use a piece of wire formed
into a hook and draw the filter out of the tank (2). Replace the filter if it is
hardened, clogged up, or excessively contaminated.
- Inadequate fuel supply as a result of a deteriorated fuel filter may result in poor
engine performance. In order to ensure that the required amount of fuel enters
the carburetor, replace the fuel filter whenever in doubt of its condition.
Cleaning the muffler outlet
- Check the condition of the muffler outlet (3) at regular intervals.
- Use a suitable tool to remove excessive carbon residue that accumulates
around the muffler outlet. Take special care to prevent removed carbon residue
from entering engine parts.
Cleaning the spark arrester
- The spark arrester should be cleaned every 50 working hours.
- Have the spark arrester cleaned at your dealership or by an authorized service
agent.
For all maintenance work not mentioned in this instruction manual, please contact
your dealership or an authorized service agent.
Daily inspection and maintenance
To ensure a long service life of your pole hedge trimmer, perform the following
inspections and maintenance on a daily basis.
- Always check for loose or missing parts before starting operation. Pay special
attention to the cutting unit and make sure that the cutter blade lock screws are
well tightened.
- Check for clogging of the cooling air passages and the cooling fins of the
cylinder before starting operation. Clean if necessary.
- Each day after using the pole hedge trimmer perform the following.
Clean the outside of the pole hedge trimmer; check for damage and loose
parts.
Clean the air filter. Clean the filter several times a day if working in extremely
dusty conditions.
Check the cutter blades for damage. Make sure that the blades are securely
mounted.
Grease nipple
(1)
(3)
(2)
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita PTR2500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita PTR2500 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info