691508
12
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
12 ENGLISH
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and unplugged before carrying out
any work on the tool.
Installing or removing loop handle
CAUTION: Always be sure that the loop han-
dle is installed securely before operation.
To install the loop handle, put it onto the tool as illus-
trated and install the bolts. Then tighten them securely
with a hex wrench.
The loop handle can be installed only in the direction as
shown in the gure.
Fig.5: 1. Loop handle 2. Bolt
To remove the loop handle, follow the above installing
procedure in reverse.
Installing or removing dust
collecting wheel guard
WARNING:
Always switch OFF and unplug the
tool before attaching dust collecting wheel guard.
WARNING:
Dust collecting wheel guard is
only for use in planing concrete surface with a off-
set diamond wheel. Do not use this guard with any
other cutting accessory or for any other purpose.
WARNING: Inspect dust collecting wheel
guard thoroughly before use to ensure that it is
not damaged, cracked and/or deformed.
Remove any abrasive wheel and wheel cover from the tool.
Loosen the screw on dust collecting wheel guard until
attaching slot opens.
Fig.6: 1. Screw 2. Dust collecting wheel guard
Mount dust collecting wheel guard with the protrusion
on the dust collecting wheel guard aligned with the
notch on the bearing box.
Fig.7: 1. Dust collecting wheel guard 2. Bearing box
3. Protrusion 4. Notch
Turn the dust collecting wheel guard in direction of the
arrow. Be sure to tighten the screw securely.
Fig.8: 1. Screw
To remove the dust collecting wheel guard, follow the
above installing procedure in reverse.
Installing or removing offset
diamond wheel
Optional accessory
WARNING: For offset diamond wheels that
are 4 mm or thinner, place the convex section of
the lock nut upwards and attach to the spindle.
WARNING: Be sure to use a genuine Makita
offset diamond wheel.
CAUTION: When installing a diamond wheel,
always make sure to tighten the lock nut rmly.
Mount the inner ange onto the spindle.
Make sure to t the dented part of the inner ange onto
the straight part at the bottom of the spindle.
Fit the offset diamond wheel on the inner ange and
screw the lock nut onto the spindle.
To tighten the lock nut, press the shaft lock rmly so
that the spindle cannot revolve, then use the lock nut
wrench and securely tighten clockwise.
To remove the wheel, follow the above installing proce-
dure in reverse.
Fig.9:
1. Lock nut 2. Convex section 3. Offset diamond
wheel 4. Inner ange 5. Spindle 6. Shaft lock
Connecting a vacuum cleaner
Optional accessory
Fig.10
When you wish to perform clean concrete-planing
operation, connect a Makita vacuum cleaner to your
tool. Then connect a hose of the vacuum cleaner to the
nozzle as shown in the gures.
Installing or removing dust cover
attachment
Optional accessory
WARNING: Always be sure that the tool is
switched off and unplugged before installing or
removing the dust cover attachment. Failure to do
so causes damage to the tool or a personal injury.
There are four pieces of dust cover attachment and
each is used in one of different positions.
Fig.11: 1. Marking A 2. Marking B 3. Marking C
4. Marking D
Set the dust cover attachment so that the marking (A, B, C or
D) places as shown in the gure. Snap its pins in the vents.
Dust cover attachment can be removed by hand.
NOTE: Clean out the dust cover attachment when it
is clogged with dust or foreign matters. Continuing
operation with a clogged dust cover attachment will
damage the tool.
OPERATION
Concrete planing operation
CAUTION: ALWAYS hold the tool rmly with
one hand on the housing and the other on the
auxiliary handle as shown in the gure.
CAUTION:
Before operation, make sure that a
vacuum cleaner is connected to the tool and turned on.
CAUTION: Do not use the tool with damaged
brush. Use of damaged brush could lead to injury by
leaking dust.
Always install the auxiliary handle on the tool before
operation. Hold the tool's switch handle and the auxil-
iary handle rmly with both hands during operation.
Fig.12
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita PC5010C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita PC5010C in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens als bijlage per email.

De handleiding is 6,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info