691835
9
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
9ENGLISH
Switch action
Fig.12: 1. Lock-off lever 2. Switch trigger
CAUTION: Before inserting the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
CAUTION: Do not pull the switch trigger
hard without pressing the lock-off lever. This can
cause switch breakage.
Topreventtheswitchtriggerfrombeingaccidentally
pulled,alock-offleverisprovided.Tostartthetool,slide
the lock-off lever and pull the switch trigger. Release the
switch trigger to stop.
WARNING: For your safety, this tool is
equipped with lock-off lever which prevents the
tool from unintended starting. NEVER use the
tool if it runs when you simply pull the switch
trigger without pressing the lock-off lever. Return
tool a MAKITA service center for proper repairs
BEFORE further usage.
WARNING: NEVER tape down or defeat pur-
pose and function of lock-off lever.
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Removing or installing circular saw
blade
Fig.13: 1. Shaft lock 2. Hex wrench
CAUTION:
Be sure the circular saw blade is
installed with teeth pointing up at the front of the tool.
CAUTION: Use only the Makita wrench to
install or remove the circular saw blade.
Toremovethecircularsawblade,presstheshaftlock
fullysothatthecircularsawbladecannotrevolveand
usethewrenchtoloosenthehexboltcounterclockwise.
Thenremovethehexbolt,outerangeandcircularsaw
blade.
Fig.14: 1.Hexbolt 2.Outerange 3.Circular
sawblade 4.Innerange
Toinstallthecircularsawblade,followtheremovalpro-
cedureinreverse.BESURETOTIGHTENTHEHEX
BOLTCLOCKWISESECURELY.
Fig.15: 1.Hexbolt 2.Protrusion 3.Outer
ange 4.Circularsawblade 5.Innerange
6.Protrusion(biggerside)
NOTE:Ifainnerangeisremovedbychance,install
theinnerangesothatitsprotrusion(biggerside)
facesinsideasshowninthegure.
Whenchangingthecircularsawblade,makesureto
alsocleantheupperandlowerbladeguardsofaccu-
mulated sawdust as discussed in the Maintenance
section. Such efforts do not replace the need to check
lowerguardoperationbeforeeachuse.
Hex wrench storage
Fig.16: 1. Hex wrench
When not in use, store the hex wrench as shown in the
guretokeepitfrombeinglost.
Connecting a vacuum cleaner
Optional accessory
Fig.17: 1. Dust nozzle (optional accessory)
2. Screw (optional accessory)
Fig.18
When you wish to perform clean cutting operation,
connect a Makita vacuum cleaner to your tool. Install
the dust nozzle (optional accessory) on the tool using
thescrew.Thenconnectahoseofthevacuumcleaner
tothedustnozzleasshowninthegure.
OPERATION
CAUTION: Be sure to move the tool forward
in a straight line gently. Forcing or twisting the tool
will result in overheating the motor and dangerous
kickback,possiblycausingsevereinjury.
NOTE:Whenthebatterycartridgetemperatureis
low,thetoolmaynotworktoitsfullcapacity.Atthis
time, for example, use the tool for a light-duty cut for
awhileuntilthebatterycartridgewarmsupashigh
asroomtemperature.Then,thetoolcanworktoits
full capacity.
Fig.19
Holdthetoolrmly.Thetoolisprovidedwithbotha
frontgrip(motorhousing)andrearhandle.Usebothto
bestgraspthetool.Ifbothhandsareholdingsaw,they
cannotbecutbythecircularsawblade.Setthebaseon
theworkpiecetobecutwithoutthecircularsawblade
makinganycontact.Thenturnthetoolonandwaituntil
thecircularsawbladeattainsfullspeed.Nowsimply
move the tool forward over the workpiece surface,
keepingitatandadvancingsmoothlyuntilthesawing
is completed.
Togetcleancuts,keepyoursawinglinestraightand
your speed of advance uniform. If the cut fails to prop-
erly follow your intended cut line, do not attempt to turn
orforcethetoolbacktothecutline.Doingsomaybind
thecircularsawbladeandleadtodangerouskickback
andpossibleseriousinjury.Releaseswitch,waitforcir-
cularsawbladetostopandthenwithdrawtool.Realign
toolonnewcutline,andstartcutagain.Attemptto
avoid positioning which exposes operator to chips and
wooddustbeingejectedfromsaw.Useeyeprotection
tohelpavoidinjury.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita HS301D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita HS301D in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens als bijlage per email.

De handleiding is 11,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info