793650
21
Verklein
Vergroot
Pagina terug
1/188
Pagina verder
21 ENGLISH
Uninstallation
1. Push the chuck cover down all the way and pull a
󰀨
Fig.29: 1. Bit 2. Chuck cover
2. Hold the attachment unit of the dust cup set and
pull it apart from the tool.
Fig.30: 1. Attachment unit
NOTE:󰀨
place it back to the original position.
1. Detach the bellows from the attachment unit of the
dust cup set.
Fig.31: 1. Bellows 2. Attachment unit
2. Set the cap back in place with its printed side
facing upwards.
Fig.32: 1. Cap 2. Printed side 3. Grooves 4. Lips of
upper opening 5. Attachment unit
3. 
the lips of the upper opening of the attachment unit.
Fig.33
DUST COLLECTION
SYSTEM
Optional accessory
The dust collection system is designed to collect dusts
󰀨
Fig.34: 1. Dust collection system
CAUTION: The dust collection system is
intended for drilling in concrete only. Do not use
the dust collection system for drilling in metal or
wood.
CAUTION: When using the tool with the dust

to the dust collection system to prevent dust
inhalation.
CAUTION: Before using the dust collection

Failure to do so may cause dust inhalation.
CAUTION: The dust collection system col-
lects the generated dust at a considerable rate,
but not all dust can be collected.
NOTICE: Do not use the dust collection system
for core drilling or chiseling.
NOTICE: Do not use the dust collection system
for metal or wood. The dust collection system is
intended for concrete only.
NOTICE: Do not use the dust collection system
for drilling in wet concrete or use this system
in wet environment. Failure to do so may cause
malfunction.
Installation
NOTICE: Before installing the dust collection
system, clean the joint parts of the tool and the
dust collection system. 
󰀩
system. If any dust remains on the air duct, the dust

breakage of the tool.
Hang the hooks of the dust collection system on the
pockets at the bottom front of the tool. Lift the nozzle
up to secure the dust collection system in place with a
click, so the air duct of the tool becomes covered with
the suction air outlet of the dust collection system.
Fig.35:
1. Hooks 2. Dust collection system 3. Pockets
4. Nozzle 5. Air duct 6. Suction air outlet
Uninstallation
󰀨
system, and lower the nozzle to release the upper part
of the dust collection system. Unhook the lower part of
the dust collection system from the tool.
Fig.36: 1. Dust collection system 2. Nozzle 3. Lock
󰀨
Adjusting nozzle position
CAUTION: Do not point the nozzle at yourself
or others when releasing the nozzle by pushing
the guide adjustment button.
Slide in and out the nozzle guide while pressing the


behind the front surface of the nozzle.
Fig.37: 1. Nozzle guide 2.
3. Tip of drill bit 4. Front surface of nozzle
Adjusting drilling depths


-
ment button and slide it to your desired position.
Fig.38:
1.2. Nozzle guide
3. Support arm for nozzle guide 4. Drilling depths

CAUTION:
Do not turn the dial on the dust case
while the dust case is removed from the dust collec-
tion system. Doing so may cause dust inhalation.
CAUTION: 󰀨
turning the dial on the dust case. Turning the dial
while the tool is running may result in the loss of
control of the tool.

󰀩
the number of times to dispose of the dust.
Turn the dial on the dust case three times after col-
lecting every 50,000 mm3 of dust or when you feel the
vacuum performance declined.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita HR009G bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita HR009G in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens als bijlage per email.

De handleiding is 30.62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info