Handleiding Makita EM2653LHN (pagina 5 van 84) (Engels, Portugees, Spaans)

690574

Verklein

Vergroot

Pagina terug

1/84

Pagina verder

Start the brushcutter only in accordance with the instructions.

– Do not use any other methods for starting the engine!

– Usethebrushcutterandthetoolsonlyforsuchapplicationsasspecied.

– Only start the engine, after the entire assembly is done. Operation of the

device is only permitted after all the appropriate accessories are attached!

– Before starting make sure that the cutting tool has no contact with hard

objectssuchasbranches,stonesetc.asthecuttingtoolwillrevolvewhen

starting.

– The engine is to be switched off immediately in case of any engine problems.

– Shouldthecuttingtoolhitstonesorotherhardobjects,immediatelyswitchoff

the engine and inspect the cutting tool.

– Inspect the cutting tool at short regular intervals for damage (detection of

hairline cracks by means of tapping-noise test).

– If the equipment gets heavy impact or fall, check the condition before

continuing work. Check the fuel system for fuel leakage and the controls

and safety devices for malfunction. If there is any damage or doubt, ask our

authorizedservicecenterfortheinspectionandrepair.

– Operate the equipment only with the shoulder harness attached which is

tobesuitablyadjustedbeforeputtingthebrushcutterintooperation.Itis

essentialtoadjusttheshoulderharnessaccordingtotheusersizetoprevent

fatigue occurring during use. Never hold the cutter with one hand during use.

– During operation always hold the brushcutter with both hands.

Always ensure a safe footing.

– Operate the equipment in such a manner as to avoid inhalation of the exhaust

gases. Never run the engine in enclosed rooms (risk of gas poisoning).

Carbon monoxide is an odorless gas.

– Switch off the engine when resting and when leaving the equipment

unattended, and place it in a safe location to prevent danger to others or

damage to the machine.

– Never put the hot brushcutter onto dry grass or onto any combustible

materials.

– Always install the approved cutting tool guard onto the equipment before

starting the engine.

Otherwisecontactwiththecuttingtoolmaycauseseriousinjury.

– All protective installations and guards supplied with the machine must be

used during operation.

– Neveroperatetheenginewithfaultyexhaustmufer.

– Shut off the engine during transport.

– When transporting the equipment, always attach the cover to the cutting

blade.

– Ensure safe position of the equipment during car transportation to avoid fuel

leakage.

– When transporting, ensure that the fuel tank is completely empty.

– When unloading the equipment from the truck, never drop the Engine to the

ground or this may severely damage the fuel tank.

– Except in case of emergency, never drop or cast the equipment to the ground

or this may severely damage the equipment.

– Remember to lift the entire equipment from the ground when moving the

equipment. Dragging the fuel tank is highly dangerous and will cause damage

andleakageoffuel,possiblycausingre.

Refueling

– Shutofftheengineduringrefueling,keepawayfromopenamesanddonot

smoke.

– Avoid skin contact with mineral oil products. Do not inhale fuel vapor. Always

wear protective gloves during refueling. Change and clean protective clothing

at regular intervals.

– Take care not to spill either fuel or oil in order to prevent soil contamination

(environmental protection). Clean the brushcutter immediately after fuel has

been spilt.

– Avoid any fuel contact with your clothing. Change your clothing instantly if

fuelhasbeenspiltonit(topreventclothingcatchingre).

– Inspect the fuel cap at regular intervals making sure that it can be securely

fastened and does not leak.

– Carefully tighten the fuel tank cap. Change location to start the engine (at

least 3 meters away from the place of refueling).

– Never refuel in closed rooms. Fuel vapors accumulate at ground lever (risk of

explosions).

– Only transport and store fuel in approved containers. Make sure the fuel

stored is not accessible to children.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Makita EM2653LHN Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info