448386
23
Verklein
Vergroot
Pagina terug
1/49
Pagina verder
15
EN
FR
DE
NL
ES
IT
PT
GR
NO
SE
FI
DK
RU
9. PERIODIC OPERATION
AND INSPECTION
10. TRANSPORTING
Brush Maintenance Essentials
(Disassembly and Assembly) (See Fig. 󱌶-)
BRUSH
SLIP RING
BRUSH HOLDER
FLANGE BOLTS
BRACKET COVER
FLANGE BOLTS
Disassembly
1. Remove the two ange bolts (M5 x 20), then
remove the bracket cover.
2. Remove the two ange bolts (M5 x 16), then
remove the brush.
Assembly
1. While pressing the brush against the slip ring,
secure it (1.5~2N•m) by tightening it with the two
ange bolts (M5 × 16).
When doing so, con rm that the brush is in the
proper position relative to the slip ring.
2. Secure the bracket cover (3~4N•m) by tightening it
with the two ange bolts (M5 × 20).
When furnishing the generator as emergency electric
power source, periodic operation and inspection are
needed.
Fuel (gasoline) and engine oil will be deteriorated with
time, and this causes that the engine is dif cult to start
and as the results improper engine operation and fault.
CAUTION
Since the fuel (gasoline) will be deteriorated
with time, replace fuel (gasoline) with fresh one
periodically; once every three (3) months is
recommended.
When transporting the generator, make sure that the
fuel (gasoline) should be drained from the tank.
WARNING
To prevent fuel spillage due to the vibration
and impact, never transport the generator
with the fuel (gasoline) lled in the tank.
Secure the tank cap thoroughly.
To avoid the risk of the gasoline ammability,
never leave the generator in an area exposed
to direct sunlight or high temperatures for a
long time.
Keep the fuel (gasoline) in the exclusive
gasoline storage tank made by steel when
transporting.
(a) Turn the engine switch to the “STOP” position.
(b) Drain the fuel from the tank.
(c) Secure the tank cap.
CAUTION
Do not place any heavy objects on the
generator.
Select and place the generator in the proper
position of the transport vehicle so that the
generator not be moved or fallen down.
Fix the generator with rope as necessary.
This is done because if the length of the brush gets
any shorter, its contact pressure with the slip ring will
decrease, resulting in a drop in generator ef ciency
and the output voltage.
Check the brush every 500 hours to con rm its length.
In addition, check the brush length if the generator
malfunctions, such as when it is not generating power
or its voltage is low.
(a) Check the fuel (gasoline), engine oil and air
cleaner.
(b) Start engine.
(c) With appliance such as lightings activated, run the
engine for over ten minutes.
(d) Check for the following items;
Proper engine running.
Adequate output and the indicator lamp turned on
properly.
The engine switch normally operated.
No leakage of engine oil and fuel (gasoline).
EG671A_en_GU6838.indd 15 2010/01/18 17:14:24
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita EG321AE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita EG321AE in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 9,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Makita EG321AE

Makita EG321AE Gebruiksaanwijzing - Deutsch - 49 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info