598449
7
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
7
LED indicator / Beeper
LED indicator / Beeper on the tool shows the following functions.
013073
Function Status
Status of the LED indicator/beeper
Action to be
taken
LED indicator Beeper
Auto-stop fastening
This function works when the tool has
reached the preset fastening torque
and normal tightening has been com-
pleted. This helps overtightening to
be avoided.
Lights up in
green for
approximately
one second.
——
Delayed re-start
For approximately one second after
auto-stop fastening, the tool does not
start even if the switch trigger is
pulled.
Warning against
insufficient fastening
Insufficient fastening has been per-
formed when the switch trigger has
released before reaching the preset
fastening torque.
Lights up in red. A long beep
Retighten the
screw.
Warning for battery
cartridge capacity
This indicates the appropriate time to
replace the battery cartridge when
the battery power becomes low.
Flickers in red
slowly.
A series of long
beeps
Replace the
battery with fully
charged one.
Checking the
remaining battery
capacity, Autostop
This function works when the battery
power is almost used up. At this time,
tool stops immediately.
Lights up in red. A long beep
Replace the
battery with fully
charged one.
Check the LED indi-
cator, lamp and
beeper operation
This function works to check the
proper operation of the LED indicator,
lamp and beeper when a battery car-
tridge has been inserted into the tool.
Lights up first in
green, next red.
(And then the
lamp comes
on.)
A series of very
short beeps
Anti-reset of control-
ler
This function works when an abnor-
mal drop of the battery voltage occurs
for some reason, and the tool stops.
Flickers in red
and green alter-
natively.
A series of short
beeps
Replace the
battery with fully
charged one.
Overheat
This function works when the temper-
ature of the controller goes up very
highly, and the tool stops.
Flickers in red
quickly.
A series of short
beeps
Remove the
battery car-
tridge immedi-
ately and cool
the tool down.
Operation error of
the switch trigger
This function works to avoid the tool’s
immediate start upon insertion of bat-
tery cartridge into the tool with the
switch trigger being pulled.
Flickers in red
and green alter-
natively.
A series of short
beeps
Release the
switch trigger.
Warning for limit of
the fastening capac-
ity
The tool automatically stops without
the clutch working when exceeding
the fastening capacity limit.
Flickers in red
a
nd gree
n alter-
natively.
A series of short
beeps
Remove the
battery car-
tridge and then
install it again.
Be sure to use
the tool under
load within its
capacity.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita BFL082F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita BFL082F in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Makita BFL082F

Makita BFL082F Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl, Türkiye, Dansk - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info