598434
13
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
13
AVOID SKIN AND EYE CONTACT!
Utmost care is required when handling fuel. Fuel may contain
substances similar to solvents. Refuel either in a well ventilated
room or outdoors. Do not inhale fuel vapours. Fuel vapours are
poisonous and can be hazardous to your health. Avoid eye and
skin contact with fuels and mineral oils. Mineral oil products
degrease your skin. If your skin comes in contact with these
substances repeatedly and for an extended period of time, it
will desiccate. Various skin deseases may result. In addition,
allergic reactions are known to occur. Eyes can be irritated by
contact with oil. If oil comes into your eyes, immediately wash
them with clear water.
If your eyes are still irritated, see a doctor immediately!
The Storage of Fuel
Fuels have a limited storage life. Fuel and fuel mixtures age
through evaporation, especially at high temperatures. Aged fuel
and fuel mixtures can cause starting problems and damage the
engine.Purchase only that amount of fuel, which will be consu-
med over the next few months. At high temperatures, once fuel
has been mixed it should be used up in 6-8 weeks.
Store fuel only in proper containers, in dry, cool, secure
locations!
B
FOLLOW THE SAFETY PRECAUTIONS!
Be careful and cautious when handling fuels.
The engine must be switched off!
Refuelling
A
50:150:1
1000 cm3 (1 litre) 20 cm3 20 cm3
5000 cm3
(5 litres) 100 cm3 100 cm3
10000 cm3 (10 litres) 200 cm3 200 cm3
+
- Thoroughly clean around the tank cap (B/1) so that no dirt
can enter the fuel tank.
- Before refuelling the brushcutter make sure it is on its
side in a stabile position.
- Unscrew the tank cap (B/2) and carefully ll in the fuel mixture
up to the lower edge of the ller neck. Fill the tank carefully,
making sure not to spill any fuel.
- Tightly screw on the cap.
Clean screw cap and tank after refuelling.
Fuel mixture
Fuel
This tool is powered by a high-performance air-cooled two-
stroke engine. It runs on a mixture of gasoline and two-stroke
engine oil.
The engine was designed for regular lead-free gasoline with
an octane number of at least 91 ROZ. If this is not available,
higher-octane gasoline may be used. This will not damage the
engine, but may impair engine performance.
A similar situation will arise from the use of leaded fuel. To obtain
optimum engine operation and to protect your health and
the environment, only unleaded fuel should be used!
To lubricate the engine, use a synthetic oil for two-stroke air-cooled
engines (quality grade JASO FC or ISO EGD), which has to be ad -
ded to the fuel. The engine was designed for use with a high
perfor mance two-stroke oil sold by MAKITA, with a mixture ratio
of 50:1. This will ensure long engine life and reliable operation
with low exhaust emissions.
MAKITA high-performance two-stroke engine oil is available in
two different sizes:
1 liter part no. 980 008 607
100 ml part no. 980 008 606
In case MAKITA high-performance two-stroke engine oil is not
available, it is urgently recommended to use a mixture ratio of
50:1 with other two-stroke engine oils, as otherwise optimum
operation of the engine cannot be guaranteed.
Caution: Do not use ready-mixed fuel from petrol
stations.
Preparation of the correct mixture ratio:
50:1 when using MAKITA high-performance two-stroke engine
oil, i. e. mix 50 parts gasoline with 1 part oil.
50:1 when using other synthetic two-stroke engine oils
(quality grade JASO FC or ISO EGD), i. e. mix 50 parts
gasoline with 1 part oil.
Note:
When preparing the fuel mixture, always rst mix the entire
oil quantity with half of the gasoline, and then add the rest of
the gasoline. Shake the mixture well before putting in the fuel
tank.
It is not wise to add more oil to the mixture than speci ed,
even if this may seem safer for the engine. More oil only leads
to increased combustion residues, which not only pollute the
environment, but are also bad for the cylinder exhaust channel
and the muf er. Furthermore fuel consumption will increase and
performance will fall.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita BCM2610 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita BCM2610 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info