690564
12
Verklein
Vergroot
Pagina terug
1/172
Pagina verder
Blower Operation
1. While operating the blower, adjust the throttle trigger / throttle
lever so that the wind force is appropriate for the work location and
conditions.
2. Adjusting engine speed.
For tube throttle model: Engine speed increases by pulling the
throttle trigger. To decrease the engine speed, loosen the throttle
trigger.
The cruise control function allows the operator to maintain a constant
engine speed without pulling the trigger lever. To increase the engine
speed, turn the stop control lever to high speed. To decrease the
engine speed, turn the stop control lever to low speed.
2
1
1. Throttle trigger 2. Stop control lever
For hip throttle model: To increase the engine speed, turn the throt-
tle lever to high speed. To decrease the engine speed, turn the throt-
tle lever to low speed.
1
1. Throttle lever
Transporting the blower
CAUTION: When transporting the blower, be sure to stop
the engine.
NOTICE: Do not sit or stand on the blower or put a heavy
object on it. It may damage the machine.
NOTICE: Maintain the blower in an upright position whenever
transporting or storing. Transporting or storing in a position that
is not upright may cause oil to spill inside the blower engine. This
may result in oil leaks and white smoke from burning oil, and the air
cleaner may become dirty with oil.
NOTICE: Do not drag the blower when transporting. Otherwise
the blower housing may be damaged.
MAINTENANCE
CAUTION: Before inspection and maintenance, stop the
engine and allow it to cool down. Remove the spark plug and
plug cap. Otherwise the operator may suffer burn or serious injury
due to an accidental start-up.
CAUTION: After inspection and maintenance, make sure
that all parts are assembled.
Replacing engine oil
CAUTION: The engine main unit and engine oil still remain
hot just after the engine is stopped. When replacing engine oil,
make sure that the engine main unit and engine oil are suf-
ciently cooled down. Otherwise, there may remain a risk of scald.
Allow sufcient time after stopping engine for the engine oil to return
to the oil tank to ensure accurate reading of the oil level indicator.
CAUTION: If the oil lled above the limit, it may become
dirty or may catch re with white smoke.
NOTICE: Never discard replaced engine oil in garbage,
ground or sewage. Disposal of oil is regulated by law. In disposal,
always follow the relevant laws and regulations. For any points
remaining unknown, contact Authorized Service Agent.
NOTICE: Oil will deteriorate even when it is kept unused.
Perform inspection and replacement at regular intervals (replace
with new oil every 6 months).
Deteriorated engine oil shortens the life of the sliding and rotating
parts to a great extent. Be sure to check the period and quantity of
replacement.
Interval of replacement
After rst 20 operating hours, followed by every 50 operating hours
Recommended oil
Makita genuine 4-stroke engine oil or
API grade SF class or higher, SAE 10W-30 oil (automobile
4-stroke engine oil)
Oil replacement procedure
Change the oil as follows:
1
4
5
6
3
2
1. Drainage hole 2. Oil drain bolt 3. Gasket (aluminum washer)
4. Oil cap 5. Oil cap gasket 6. Oil port
1. Put the blower down on a level surface.
2. Put a waste oil container under the drainage hole to catch the oil
as it drains out. The container should have a capacity of at least 220
ml to catch all of the oil.
12 ENGLISH
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita B7660WH bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita B7660WH in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens als bijlage per email.

De handleiding is 42,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info