534675
81
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
81ADVANCED PRINTING
TEMPERATURE CONTINUED
If you are experimenting with dierent materials
or extrusion rates, you need to consider the
properties of the material you are using.
Additives in plastic, including coloring agents,
can also aect a particular filament’s properties,
so if you are having trouble with a new roll of
filament, temperature might be the culprit.
Build Plate. A heated build plate helps
printed plastic objects to stick to the
printing surface without warping. If prints
are not adhering to your build plate, and you
have tried cleaning and releveling, try raising
the plate temperature a few degrees.
ABS adheres best at temperatures between
100° and 115° C. If you adjust the plate
temperature to 115° C and continue to have
adhesion problems, the problem probably
lies elsewhere.
PLA is much less likely to warp, and tends
to work well on an unheated build plate,
but having a heated plate can improve
large PLA prints by relaxing the bottom
layers. Temperatures in the 40° to 60° C
range work well with PLA. The material of
the printing surface is also a factor here.
PLA sticks well to blue tape at much lower
temperatures, but will not stick well to
Kapton tape even at high temperatures.
SPEED [Fig. 11.5]
Everyone wants their MakerBot to move
faster so they can print things more quickly.
Our default print speed is 80 mm/s, and
if you want to print faster, you might have
to adjust more settings than the extrusion
speed. Print speeds are closely tied to
temperature settings and to the mechanical
capabilities of your MakerBot.
Speed while Extruding. Speed while
Extruding controls two things: the speed at
which the extruder is moving while printing and
the speed at which plastic is coming out of the
nozzle. These speeds are the same because
that makes for the most even extrusion.
SPEED
Fig. 11.5
81

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MakerBot Replicator 2X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MakerBot Replicator 2X in de taal/talen: Engels als bijlage per email.

De handleiding is 7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info