534675
41
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
41PRINTING FROM SD
TROUBLESHOOTING
The Replicator 2X doesn’t recognize
the SD Card
If your MakerBot Replicator 2X does not
detect that there is a card in the SD slot,
make sure the SD card is:
an SDSC card formatted for FAT16
no larger than 2GB.
Your MakerBot Replicator 2X can read only
cards that meet these requirements.
The default SD card that is shipped with
your MakerBot Replicator 2X is formatted
correctly and is of the correct size.
If the card is formatted correctly but your
MakerBot Replicator 2X fails to recognize
it, something may be wrong with the card.
Contact MakerBot Support.
The Replicator 2X doesn’t see the files
on the SD Card
If your MakerBot Replicator 2X detects
the SD card but can’t see the files on the
SD card, make sure that each file is in the
correct format.
Your MakerBot Replicator 2X can
read only files:
that use the X3G format. To create an X3G
file in MakerWare, click Export to File in
the make dialog and select X3G from the
file type dropdown menu.
• with les name fewer than 26 characters;
30 characters if you count the file
extension. If you are trying to print an
X3G file with a long file name, shorten
it and try again.
The default SD card that is shipped with
your MakerBot Replicator 2X contains only
files of the correct format and with names
less than 26 characters.
If the files are formatted for X3G and the
file names have fewer than 26 characters
but your MakerBot Replicator 2X fails to
recognize them, something may be wrong
with the card. Contact MakerBot Support.
Printed objects don’t stick to the build plate
If printed objects are not sticking to the
build plate, try these solutions:
Re-level your build plate by going to
Utilities > Level Build Plate. Inconsistent
plate height will lead to inconsistent
adhesion. If any one part of your object
does not adhere well to the plate, the
whole object might peel o the plate.
Try leveling the plate again and using
a thinner piece of paper or feeler gauge
to check the distance.
Ensure that the plate is clean. Bubbles,
scratches, dust, and oil from your hands
can prevent objects from sticking to the
Kapton tape. Wipe down the build plate
with a clean, lint-free cloth.
41

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MakerBot Replicator 2X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MakerBot Replicator 2X in de taal/talen: Engels als bijlage per email.

De handleiding is 7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info