534674

MakerBot Replicator 2 - MB1036 Handleiding

59
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
®
USER MANUAL
MB2020_REP2_UserManual_V4.indd 1 7/22/13 5:32 PM
MB2020_REP2_UserManual_V4.indd 2 7/22/13 5:32 PM
3
A WELCOME. LET’S GET STARTED 04
Specifications 06
How Does it Work? 07
B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER 08
What’s in The Box 10
MakerBot Replicator 2 Diagram 11
Unpacking Your MakerBot Replicator 2 12
Installing Build Plate 14
Installing Filament Guide Tube and Spool Holder 15
Mounting Filament Spool and Attaching USB Cable 16
Attaching Power Supply and Powering On 17
C STA RT UP PROCESS: LEVELING, LOADING, TESTING 18
Leveling the Build Plate 20
Loading MakerBot PLA Filament 23
Unloading MakerBot PLA Filament 27
Making a Test Object from the SD Card 28
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE 30
E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE 42
Troubleshooting 44
Diagnostics 46
LCD Panel | Top-Level Menu 46
LCD Panel | Utilities Menu 47
LCD Panel | Info and Settings Menu 48
Maintenance 49
Lubricating the Threaded Rod and the X-Axis Idler Pulley 49
Cleaning the Drive Gear 51
Glossary of Terms 54
Contact Us 56
Safety and Compliance 57
Warranty, Returns, and Replacement Policy 58
F TERMS OF SERVICE 58
TABLE OF CONTENTSV4
TABLE OF CONTENTS
MB2020_REP2_UserManual_V4.indd 3 7/22/13 5:32 PM
Welcome.
Let’s get started.
A
MB2020_REP2_UserManual_V4.indd 4 7/22/13 5:32 PM
5
WARNING: The MakerBot Replicator 2 generates high temperatures and includes moving parts that
can cause injury. Never reach inside the MakerBot Replicator 2 while it is in operation. Always allow the
MakerBot Replicator 2 to cool down before reaching inside.
WARNING: Do not leave the MakerBot Replicator 2 unattended during operation.
CAUTION: If opening the MakerBot Replicator 2 for service, ensure that the power supply is turned o
and the cord is disconnected.
This User Guide is designed to start your journey
with the MakerBot
®
Replicator
®
2 Desktop 3D Printer
in the right direction. Even if you are familiar with
earlier MakerBot machines, it is essential that
you read through this guide, as there are several
important and exciting updates with the MakerBot
Replicator 2.
In chapters A and B, you will learn the basics
of the MakerBot Replicator 2, how to unbox safely,
and how to get set up. Chapters C–E will take
you through leveling, printing, maintenance,
and troubleshooting.
MakerBot is excited to welcome you to the world
of the MakerBot Replicator 2. Following this guide
will help ensure that you are getting the most out
of your machine, and that you continue to make
amazing things.
A WELCOME, LET’S GET STARTED
MB2020_REP2_UserManual_V4.indd 5 7/22/13 5:32 PM
6 A WELCOME, LET’S GET STARTED
PRINTING
Print Technology: Fused Filament Fabrication
Build Volume: 11.2 L x 6.0 W x 6.1 H in
[28.5 x 15.3 x 15.5 cm]
High 100 microns [0.0039 in]
Standard 200 microns [0.0078 in]
Low 300 microns [0.0118 in]
Positioning Precision: XY: 11 microns [0.0004 in];
Z: 2.5 microns [0.0001 in]
Filament Diameter: 1.75 mm [0.069 in]
Nozzle Diameter: 0.4 mm [0.015 in]
SOFTWARE
Soware Bundle: MakerBot MakerWare
™
File Types: .stl, .obj, .thing
Supports: Windows (XP 32 bit/7+)
Ubuntu Linux (12.04+)
Mac OS X (10.6 64 bit/10.7+)
PHYSICAL DIMENSIONS
Without Spool: 19.1 x 12.8 x 14.7 in [49 x 32 x 38 cm]
With Spool: 19.1 x 16.5 x 14.7 in [49 x 42 x 38 cm]
Shipping Box: 23 x 21.5 x 17 in [59 x 55 x 43 cm]
Weight: 25.4 lbs [11.5 kg]
Shipping Weight: 37 lbs [16.8 kg]
TEMPERATURE
Ambient Operating 15° – 32° C [60° – 90° F]
Temperature:
Storage Temperature: 0° – 32° C [32° – 90° F]
ELECTRICAL
AC Input: 100 – 240 V,
~
2 amps, 50 – 60 Hz
Power Requirements: 24 V DC @ 6.25 amps
Connectivity: SD card [FAT 16, max. 2GB]
MECHANICAL
Chassis: Powder-coated steel
Body: PVC Panels
Build Platform: Acrylic
XYZ Bearings: Wear-resistant,
oil-infused bronze
Stepper Motors: 1.8° step angle with
1/16 micro-stepping
SPECIFICATIONS
Layer Resolution
Settings:
MB2020_REP2_UserManual_V4.indd 6 7/22/13 5:32 PM
7A WELCOME, LET’S GET STARTED
The MakerBot Replicator 2 makes solid, three-dimensional objects out of melted MakerBot
PLA Filament. Your 3D design files are translated into instructions for the MakerBot
Replicator 2 and sent to the machine via SD card. Then the MakerBot Replicator 2 heats
the MakerBot PLA Filament and squeezes it out through a nozzle to make a solid object
layer by layer. This method is called Fused Filament Fabrication [FFF].
HOW DOES IT WORK?
®
MB2020_REP2_UserManual_V4.indd 7 7/22/13 5:32 PM
Setting Up Your
MakerBot
®
Replicator
®
2
Desktop 3D Printer
B
MB2020_REP2_UserManual_V4.indd 8 7/22/13 5:32 PM
9
When you set up your MakerBot
®
Replicator
®
2
Desktop 3D Printer, remember that it was built and
packaged very carefully at the MakerBot factory.
We hope you’ll take your time and be just as careful
unpacking it and getting it set up.
NOTE: Do not force or tear anything during unpacking and setup.
This may damage the MakerBot Replicator 2 Desktop 3D Printer.
B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER
MB2020_REP2_UserManual_V4.indd 9 7/22/13 5:32 PM
10 B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER
Filament guide tube
Power supply
and cable
Hex wrenches PTFE-based grease
Spool holder
USB-A to
USB-B cable
Support card Blue tape sheets
SD card
1
1 1
1 1
4 1 1 3
WHAT’S IN THE BOX
MakerBot PLA Filament
[1lb Spool]
1
*
Build plate
1
*
*
More options available at makerbot.com/store
MB2020_REP2_UserManual_V4.indd 10 7/22/13 5:32 PM
11B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER
MAKERBOT REPLICATOR 2 DIAGRAM
8
10
2
11
3
7
5
6
4
9
1
[1] GANTRY SYSTEM
[2] LCD PANEL
[3] KEY PAD
[4] THREADED Z-AXIS ROD
[5] BUILD PLATE
[6] BUILD PLATFORM
[7] FILAMENT GUIDE TUBE
[8] EXTRUDER CABLE
[9] EXTRUDER
[10] FILAMENT SPOOL
[11] SPOOL HOLDER
®
MB2020_REP2_UserManual_V4.indd 11 7/22/13 5:32 PM
12
UNPACKING YOUR MAKERBOT REPLICATOR 2
1a. Place the MakerBot Replicator 2 box on
the ground. Open the box and remove the
top cardboard sheet.
1b. Remove the MakerBot Replicator 2 User
Manual. We recommend that you use the
manual to guide you through the setup
process and keep it at hand as you unpack
the contents of the box. If you find that
anything described in the manual is
missing, email us at support@makerbot.com.
1c. Remove the layer of foam and the sheet
of cardboard underneath.
1d. Remove the two protective foam pieces
from the sides of the Replicator 2.
NOTE: You can download a PDF copy of this manual
at makerbot.com/support/replicator2.
1
Opening the Box 1
B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER
MB2020_REP2_UserManual_V4.indd 12 7/22/13 5:32 PM
13
UNPACKING YOUR MAKERBOT REPLICATOR 2 CONTINUED
3a. Remove the two remaining protective
foam pieces from the bottom of the
Replicator 2’s box.
3b. Li out the accessory box. This box
contains the remaining items from the
“What’s in the Box” section.
NOTE: Your MakerBot Replicator 2 should now be
fully unpacked. We recommend that you keep the
box and foam inserts in case you need to transport
your MakerBot Replicator 2 in the future.
2a. Open the plastic covering and firmly grasp
the frame of the MakerBot Replicator 2 from
the outside. Li it out of the box and place it
on a stable surface.
NOTE: The black cable is not a handle. Do not pull
or twist the black cable at any time.
3
Removing the Accessory Box 1
2
Removing the MakerBot Replicator 2 from the Box
B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER
MB2020_REP2_UserManual_V4.indd 13 7/22/13 5:32 PM
14
INSTALLING BUILD PLATE
B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER
5a. Use strong scissors or a wire cutter to
cut the zip ties holding the gantry system
in place. Discard the zip ties and the plastic
pieces holding them in place.
NOTE: Operate scissors with care.
5b. A small plastic piece attached to the
X-axis belt and gantry rods prevents the
extruder from moving. Carefully snap the
piece o of the rods and tilt it to slide it o
of the belt.
5
Freeing the Extruder
4a. Locate and unwrap the build plate. Tilt
and fit the notch in the build plate onto the
tab at the back of the build platform. Fit the
tab in the build plate between the two pegs
at the front of the build platform.
4b. To remove the build plate, gently push
the tab on the front of the build plate
toward the back of the build platform
to release the tab from the pegs. Lift
the build plate from the build platform.
4
Installing the Build Plate
Plate-Locking Pegs
MB2020_REP2_UserManual_V4.indd 14 7/22/13 5:32 PM
15
INSTALLING FILAMENT GUIDE TUBE AND SPOOL HOLDER
B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER
6a. Locate the filament guide tube. Insert one
end into the hole at the top of the extruder
and push the tube in as far as it will go.
6b. Insert the other end of the filament guide
tube into the le guide tube holder [when
viewed from the back] on the back of the
MakerBot Replicator 2. Make sure that the
end of the filament guide tube is flush with
the bottom of the guide tube holder. The
filament guide tube should not hang down
past the bottom of the guide tube holder.
7a. Locate the spool holder. Tilt the spool
holder and insert the square end into
the le side opening on the back of the
MakerBot Replicator 2 [when viewed from
the back].
6
Installing the Filament Guide Tube
7
Installing the Spool Holder
MB2020_REP2_UserManual_V4.indd 15 7/22/13 5:32 PM
16
9a. Locate the power supply and cable.
Attach the cable to the power supply.
9b. Ensure that the power switch on
the MakerBot Replicator 2 is set to the
OFF position.
9c. Insert the power supply connector
into the power input on the back of the
Replicator 2. Ensure that the flat side of
the connector faces down.
9
Attaching the Power Supply
MOUNTING FILAMENT SPOOL AND ATTACHING USB CABLE
B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER
8a. Open the box containing the MakerBot
PLA Filament. Remove the spool from its bag.
8b. Fit the spool onto the spool holder.
Ensure that the MakerBot PLA Filament
unwinds counterclockwise [when viewed
from the back] . Squeeze the spool holder
and push the spool on until it locks.
8
Mounting the Filament Spool
Power Supply
Spool
Holder
MB2020_REP2_UserManual_V4.indd 16 7/22/13 5:32 PM
17
ATTACHING POWER SUPPLY AND POWERING ON
MOUNTING FILAMENT SPOOL AND ATTACHING USB CABLE
10a. Plug the AC power cord into an
electrical outlet.
10b. Set the power switch to the ON position.
10c. The MakerBot Replicator 2 will display
welcome text on the LCD panel. This is the
beginning of the startup script that will
guide you through initial calibration and
your first build.
10
Powering On the MakerBot Replicator 2
B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER
CAUTION: Do not use an extension cord or power
supply other than the ones shipped with your MakerBot
Replicator 2. Ensure that the plug is easily accessible in
case the Replicator 2 needs to be disconnected.
MB2020_REP2_UserManual_V4.indd 17 7/22/13 5:32 PM
Startup Process:
Leveling,
Loading,
Testing
C
MB2020_REP2_UserManual_V4.indd 18 7/22/13 5:32 PM
19
THE LCD KEYPAD
• Four arrow buttons surround a central M
button. Use the arrows to navigate through
the LCD menus and make selections.
• The le arrow usually allows you to go
back or cancel an action.
• A solid red M means the MakerBot
Replicator 2 is working.
• A blinking red M means the MakerBot
Replicator 2 is waiting for user input.
NOTE: If you don’t see the Startup Script, use the up and down arrow buttons to scroll through the
top-level menu on the LCD panel, and use the M button to select Utlities. Scroll to Run Startup Script and
select it. You can use these menus to return to the Startup Script at any time. You can also find a video of
this process at makerbot.com/support/replicator2/videos. If you have problems or questions, refer to the
troubleshooting chapter in this manual or contact MakerBot Support at support@makerbot.com.
Aer you power on the MakerBot
®
Replicator
®
2
Desktop 3D Printer, the LCD panel will light up and
display text. The LCD panel will now run the Startup
Script. The Startup Script will guide you through
leveling the build plate, loading MakerBot PLA
Filament, and creating your first build.
C STARTUP PROCESS: LEVELING, LOADING, TESTING
MB2020_REP2_UserManual_V4.indd 19 7/22/13 5:32 PM
20
Aer the initial welcome message, the Startup Script will display the following:
• If the build platform is too far from the extruder nozzle, or if one part of the plate is farther
away from the nozzle than another part, your builds might not stick to the build plate.
• If the build platform is too close to the extruder nozzle, the build plate can block the MakerBot
PLA Filament from extruding from the nozzle. This can also scratch the build plate.
• Leveling your build plate oen will help ensure that objects adhere well to the plate.
To level the build plate, you must adjust the three knobs under the build platform. These
three knobs lower and raise the build plate.
• Tightening the knobs [turning them to the right] moves the build plate away from the
extruder nozzle.
• Loosening the knobs [turning them to the le] moves the build plate closer to the
extruder nozzle.
• The distance between the extruder nozzle and the build plate should be about the
thickness of the MakerBot Support card included with your MakerBot Replicator 2.
LEVELING THE BUILD PLATE
!
Why Leveling Is Important
How to Level the Build Plate
C STARTUP PROCESS: LEVELING, LOADING, TESTING
MB2020_REP2_UserManual_V4.indd 20 7/22/13 5:32 PM
21
LEVELING THE BUILD PLATE CONTINUED
C STARTUP PROCESS: LEVELING, LOADING, TESTING
Leveling
Knobs
Support
Card
When directed by the LCD screen, tighten
each of the three knobs under the build
platform about four turns.
1
Make Some Room Between the Build Plate and the Nozzle
®
MB2020_REP2_UserManual_V4.indd 21 7/22/13 5:32 PM
22
LEVELING THE BUILD PLATE CONTINUED
C STARTUP PROCESS: LEVELING, LOADING, TESTING
The script will prompt you to adjust the
knobs individually. As you adjust each
knob, make sure the MakerBot Support
card just slides between the nozzle and
build plate. You should feel some friction
on the support card but still be able to
easily pass the card between the plate
and the extruder nozzle without tearing or
damaging the card.
2
Adjust the Knobs as Directed
The script will prompt you to adjust each
knob again. This allows for fine tuning.
This time, the MakerBot Support card
should slide between the build plate and
nozzle with more friction.
3
Adjust Each Knob Again
Aer the second set of adjustments, the
nozzle will move to the center of the build
plate. Confirm that the MakerBot Support
card slides between the nozzle and plate
with a moderate amount of friction.
4
Confirm your Adjustment
NOTE: If you have problems, or if you need to level your build plate again, you can use the up and down arrows
to scroll through the top-level menu on the LCD panel and use the M button to select Utilities. Scroll to Level
Build Plate and select it. You can use these menus to return to the leveling script at any time. For a demonstration
of this process, see the MakerBot Replicator 2 video page at makerbot.com/support/replicator2/videos.
MB2020_REP2_UserManual_V4.indd 22 7/22/13 5:32 PM
23
LOADING MAKERBOT PLA FILAMENT
C STARTUP PROCESS: LEVELING, LOADING, TESTING
When you have completed the initial leveling tasks, the LCD menu will display the following
text: “Aaah, that feels much better. Let’s go on and load some plastic!” Before building,
you must load the MakerBot PLA Filament into the extruder. The extruder will heat the
MakerBot PLA Filament and use the melted material to build things.
What You Will Do
• Remove the end of the
filament guide tube from
the hole in the top of
the extruder.
• Feed the free end of the
MakerBot PLA Filament
from the spool into the
end of the filament guide
tube where it attaches to
the back of the MakerBot
Replicator 2.
• Push the MakerBot
PLA Filament all the
way through the
filament guide tube.
• Insert the free end of the
MakerBot PLA Filament
into the hole in the top of
the extruder.
• Wait for the MakerBot
PLA Filament to heat
and extrude.
• Return the lament guide
tube to the hole in the top
of the extruder.
Filament
Guide Tube
Extruder
Filament
Spool
MB2020_REP2_UserManual_V4.indd 23 7/22/13 5:32 PM
24
LOADING MAKERBOT PLA FILAMENT CONTINUED
Free the end of the MakerBot PLA Filament
from the filament spool. With a pair of
scissors, cut a clean edge. Feed the end of
the MakerBot PLA Filament into the end
of the guide tube where it attaches to the
back of the MakerBot Replicator 2. Feed the
MakerBot PLA Filament through the guide
tube until it emerges from the other end of
the tube.
NOTE: To avoid filament jams, ensure that the
MakerBot PLA Filament feeds from the bottom of
the spool toward the top of the spool. Ensure that
the MakerBot PLA Filament is mounted on the le
spool holder when viewed from the back and that
it unspools counter-clockwise.
2
Feed the Filament Through the Filament Guide Tube
C STARTUP PROCESS: LEVELING, LOADING, TESTING
Locate where the filament guide tube
attaches to the top of the extruder. You
must remove the filament guide tube from
the extruder. To remove the tube, gently pull
it out of the hole in the top of the extruder.
1
Detach the Filament Guide Tube
Pull here
Filament
MB2020_REP2_UserManual_V4.indd 24 7/22/13 5:32 PM
25C STARTUP PROCESS: LEVELING, LOADING, TESTING
Aer you’ve fed the MakerBot PLA Filament
all the way through the guide tube, press
the M button on the LCD menu. The
MakerBot Replicator 2 will start to heat
your extruder.
WARNING: Do not touch the extruder while it is
heating — it heats to 230° C.
Aer the extruder reaches 230° C, the LCD
panel will prompt you to load the MakerBot
PLA Filament into the extruder. Click
through the message until your MakerBot
Replicator 2 asks you to press the M when
you see plastic extruding.
3
4
Press the M to Begin Heating the Extruder
Press the M to Continue
LOADING MAKERBOT PLA FILAMENT CONTINUED
Press the M
MB2020_REP2_UserManual_V4.indd 25 7/22/13 5:32 PM
26
Push down on the Extruder Arm.
Continue to hold it down as you insert the
free end of the filament into the hole in the
top of the extruder. Push the filament in as
far as it will go. You will see plastic start to
emerge from the extruder nozzle.
Release the extruder arm.
5
Push the Filament into the Extruder
LOADING MAKERBOT PLA FILAMENT CONTINUED
C STARTUP PROCESS: LEVELING, LOADING, TESTING
The extruder motor will grab onto the
filament and continue to draw it in. Watch to
make sure plastic is still extruding from the
nozzle aer you release the extruder arm.
Then press the M button to stop extrusion.
NOTE: Don’t be surprised if the filament that
initially comes out of the nozzle is not the color
you expected. There’s probably some filament
inside the extruder le over from our testing
process at the MakerBot Factory. Wait until you
see the color that you loaded come out of the
nozzle before you press the M button.
6
Stop Extrusion
MB2020_REP2_UserManual_V4.indd 26 7/22/13 5:32 PM
27C STARTUP PROCESS: LEVELING, LOADING, TESTING
Push the guide tube back into the opening
on the top of the extruder.
NOTE: If you have problems or need to load the
MakerBot PLA Filament again, you can use the up
and down arrows to scroll through the top-level
menu on the LCD panel and use the M button to
select Utilities. Scroll to Change Filament and select
it. Then select Load. You can use these menus to
return to the load script at any time.
7
Return the Filament Guide Tube
LOADING MAKERBOT PLA FILAMENT CONTINUED
Wait a few minutes for the extruded PLA
to cool, then pull it o the nozzle. You can
discard this extra filament. Don’t touch the
nozzle; it may still be hot.
Don’t leave plastic clinging to the extruder
nozzle. This can cause newly extruded
plastic to stick to the nozzle instead of the
build platform.
8
Remove the Extruded PLA
Unloading MakerBot PLA Filament
To unload MakerBot PLA Filament, go to the LCD panel and select Preheat > Start Preheat.
Wait for the extruder to heat to the set temperature. Then push down on the Extruder
Arm and continue to hold it down as you gently pull the filament out of the extruder.
Release the extruder arm.
MB2020_REP2_UserManual_V4.indd 27 7/22/13 5:32 PM
28 C STARTUP PROCESS: LEVELING, LOADING, TESTING
Aer you have successfully leveled the build platform and loaded the MakerBot PLA Filament
into the extruder, the LCD panel will ask you: “How’d it go? Ready to make something?”
Select “Yes” and the LCD panel will display: “Awesome! We’ll go to the SD card menu and
you can select a model!”
2a. Use the up and down arrow buttons to navigate through the list of models on the SD card.
2b. To select a model, press M.
2c. The MakerBot Replicator 2 will begin to build your object. You can use the LCD panel to
monitor the temperature of the extruder and the status and progress of your object.
MAKING A TEST OBJECT FROM THE SD CARD
2
Select a Project from the SD Card
The MakerBot Replicator 2 package
includes an SD card pre-loaded with files
for making test objects. The SD Card is
located in the SD port directly behind the
LCD Panel.
1
Locate the SD Card
SD Card
MB2020_REP2_UserManual_V4.indd 28 7/22/13 5:32 PM
29C STARTUP PROCESS: LEVELING, LOADING, TESTING
MAKING A TEST OBJECT FROM THE SD CARD CONTINUED
Projects Available on the SD Card
CHAIN LINKS
File Name: Chain Links
Make Time: 15 Minutes
Design By: Sal
Thingiverse:28405
NUT AND BOLT SET
File Name: Nut and Bolt
Make Time: 30 minutes
Design By: aubenc
Thingiverse:9095
COMB
File Name: Comb
Make Time: 26 Minutes
Design By: repraprook
Thingiverse:1140
MR JAWS
File Name: Mr Jaws
Make Time: 18 minutes
Design By: Mahoney
Thingiverse:14702
STRETCHY BRACELET
File Name: Stretchlet
Make Time: 22 minutes
Design By: Emmett
Thingiverse:13505
NAME:
File Name:
Make Time:
Design By:
Thingiverse:
Space for
additional files
MB2020_REP2_UserManual_V4.indd 29 7/22/13 5:32 PM
Making an Object with
MakerBot MakerWare
D
MB2020_REP2_UserManual_V4.indd 30 7/22/13 5:32 PM
31
How to make an object using a computer and
MakerBot
®
MakerWare
™
.
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
™
MB2020_REP2_UserManual_V4.indd 31 7/22/13 5:32 PM
32
USING MAKERBOT MAKERWARE
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
1c. Open the installer and follow the
directions to install the soware.
NOTE: You can find a video of this tutorial at http://www.makerbot.com/support/replicator2/videos.
1a. Go to your computer and open a browser session.
1b. Enter the URL makerbot.com/makerware and download the correct MakerWare installer
for your operating system.
1
Download and Install MakerBot MakerWare
MakerBot MakerWare is soware that prepares 3D models for printing and turns them
into instructions for your MakerBot Replicator 2X.
i
MB2020_REP2_UserManual_V4.indd 32 7/22/13 5:32 PM
33
Thingiverse is a website where MakerBot users and others can share design fi les.
2a. Open a browser session and go
to www.thingiverse.com. Use the
search fi eld at the upper right to
search for “Minimalist NYC buildings.”
Your search results should include
“Minimalist NYC buildings by
JonMonaghan.” Click on the link.
2b. At the right of the page you will
see a button that says “Download This
Thing!” Click this button to open the
Downloads window.
2c. For this example we chose the
Flatiron Building and the Woolworth
Building. Find “FlatIron.stl” and
“Woolworth.stl” in the list of available
downloads and click the fi le names to
save them to your computer.
USING MAKERBOT MAKERWARE CONTINUED
2
Download an Object From MakerBot Thingiverse
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
MB2020_REP2_UserManual_V4.indd 33 7/22/13 5:32 PM
34
USING MAKERBOT MAKERWARE CONTINUED
3
Open MakerBot MakerWare
[1] CAMERA HOME: Resets MakerWare to
the default view of the object.
[2] +/-: Zoom in and out. You can also use the
scroll wheel on your mouse to zoom in and out.
[3] LOOK: Click the Look button or hit the
L key to go into Look mode. In this mode,
click and drag with your mouse to rotate
the plate and the object. Use the arrow
at the side of the selected Look button to
open the Change View submenu for Top,
Side and Front views.
[4] MOVE: Click the Move button or hit the
M key to go into Move mode. In this mode,
click and drag with your mouse to move an
object around the plate. Use the arrow at
the side of the selected Move button to open
the Change Position submenu and move an
object by a specific distance and direction.
[5] TURN: Click the Turn button or hit the
T key to go into Turn mode. In this mode,
click and drag with your mouse to to rotate
the object. Use the arrow at the side of the
selected Turn button to open the Change
Rotation submenu and rotate an object by
a specified angle and direction.
[6] SCALE: Click the Scale button or hit
the S key to go into Scale mode. In this
mode, click and drag with your mouse to to
enlarge or shrink your object. Use the arrow
at the side of the selected Scale button to
open the Change Dimensions submenu
and scale by a percentage or to a specific
measurement.
[7] ADD: Click this button to add an object
to your build plate. You can add as many
objects as you can fit on the plate.
[8] MAKE IT: Click this button to open
the Make dialog, where you can specify
print resolution and other options and save
instructions for your MakerBot Replicator 2
to an SD card.
[9] SAVE: Allows you to save the current
plate as a file for later use.
[10] HELP: Opens a guide to MakerWare’s
basic functions.
[11] STATUS BAR: Displays the status
of your connection to your MakerBot
Replicator 2.
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
MB2020_REP2_UserManual_V4.indd 34 7/22/13 5:32 PM
35
USING MAKERBOT MAKERWARE CONTINUED
3
Open MakerBot MakerWare | Continued
1 2 7 8 9 10
11
3
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
NUT AND BOLT
Design By: aubenc
Thingiverse: 9095
4
6 5
MB2020_REP2_UserManual_V4.indd 35 7/22/13 5:32 PM
36
Minimalist NYC buildings
Design By: JonMonaghan
Thingiverse: 12762
4a. Click on the Add button.
Navigate to the location of the file
FlatIron.stl and select it. The file will
open at the center of the build plate.
4b. Select the Move button and
click and drag the Flatiron Building
to the le.
4c. Click on the Add button again.
Navigate to the location of the file
Woolworth.stl and select it. Now you
should see both the Flatiron Building
and the Woolworth Building models
in your virtual build space.
4d. With both models open, you
can manipulate them separately or
together. Select one of the models,
then click the Turn button or use the
T key and rotate it.
4
Open the .stl files in MakerBot MakerWare
USING MAKERBOT MAKERWARE CONTINUED
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
TIP: You can also duplicate objects by using the Add button. Select the object and use Ctrl/Command+C
to copy and Ctrl/Command+V to paste.
MB2020_REP2_UserManual_V4.indd 36 7/22/13 5:32 PM
37
4e. Click on the Flatiron Building to
select it. Hold down the shi key and
click on the Woolworth Building. Then
release the shi key. Both models
should be selected.
4f. Select the Scale button. Click and
drag to change the size of both
models together.
4
Open the .stl files in MakerBot MakerWare | Continued
5a. Select the Save button. The save
dialog gives you the option to save
your plate as an STL or a .thing file.
STLs can be opened by a wide range
of programs, but .thing files allow you
to continue to edit the components of
a plate separately.
Specify a name and location for the
file. For example, you could name the
file flatiron_woolworth.thing.
5
Save your model and toolpath files
USING MAKERBOT MAKERWARE CONTINUED
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
MB2020_REP2_UserManual_V4.indd 37 7/22/13 5:32 PM
38
5
Save your model and toolpath files | Continued
USING MAKERBOT MAKERWARE CONTINUED
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
[1] MAKE WITH: Select The
Replicator 2, if not already selected.
[2] MATERIAL: Choose the type of
plastic your are building with.
[3] QUALITY: Specify the quality
of your build. Smaller layer heights
result in more detailed models and
longer build times.
[4] RAFT: Select this to have your
object built on a ra. Ras provide
a base for supports and help your
object stick to the build plate.
[5] SUPPORTS: Select this to have
your object include easily removable
support structures under overhanging
parts of the object.
[6] ADVANCED OPTIONS: Click
here to open a menu with more
options. For information on how to
use these options, go to http://www.
makerbot.com/support/makerware/
documentation/advanced.
[7] CANCEL: Click here to cancel
this process.
[8] EXPORT!: Save the toolpath to
an SD card so that you can print it on
your MakerBot Replicator 2.
5b. Select the Make It button. The Make dialog appears, with the following options:
MB2020_REP2_UserManual_V4.indd 38 7/22/13 5:32 PM
39
5c. Insert your SD card into an SD card reader attached to your computer.
5d. Accept the default settings and click the Export! Button. MakerWare will open the
Export dialog.
5e. Set the following options in the Export dialog:
• Navigate to the location of your SD card and select it.
• Enter “atiron_woolworth” as the le name.
• Ensure that X3G is selected from the le type dropdown menu.
Then click the Save button. MakerWare will slice your file and save the toolpath to your SD card.
TIP: You can cancel a slice or build by clicking the X at the corner of the slicing progress bar or the cancel
button in the Status submenu.
6a. Eject your SD card from your computer’s SD card reader and insert it into
the SD card port behind the MakerBot Replicator 2’s LCD interface.
6b. Use the arrow buttons on the LCD interface’s keypad to navigate to “Build from SD”.
Press the M button to view the list of files available on your SD card.
6c. Use the arrow buttons to navigate to the file “flatiron_woolworth.x3g”.
Press the M button to build the selected file.
Your MakerBot Replicator 2 will use the toolpath you created to build your model.
5
6
Save your model and toolpath files | Continued
Print your file
USING MAKERBOT MAKERWARE CONTINUED
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
MB2020_REP2_UserManual_V4.indd 39 7/22/13 5:32 PM
40 D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
USING MAKERBOT MAKERWARE CONTINUED
Updating MakerBot MakerWare
We are always improving our products – including MakerWare. Be sure to update your copy
of MakerWare to the latest version so that you always have access to the newest features.
A pop up will appear in MakerWare when a new version is available for download.
You can also use the open source ReplicatorG soware to view and manipulate files
from http://www.thingiverse.com and to send files to your MakerBot Replicator 2.
To download the ReplicatorG soware, go to http://www.replicat.org/download.
To configure the ReplicatorG soware to work with your MakerBot Replicator 2,
go to http://www.makerbot.com/support/replicatorg/documentation/usage.
USING REPLICATORG
MB2020_REP2_UserManual_V4.indd 40 7/22/13 5:32 PM
41
NOTES
MB2020_REP2_UserManual_V4.indd 41 7/22/13 5:32 PM
E
Troubleshooting,
Diagnostics, and
Maintenance
MB2020_REP2_UserManual_V4.indd 42 7/22/13 5:32 PM
43
This chapter describes basic troubleshooting and
maintenance tasks for your MakerBot
®
Replicator
®
2
Desktop 3D Printer. For details on more advanced
troubleshooting and maintenance tasks, go to
makerbot.com/support.
E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
®
MB2020_REP2_UserManual_V4.indd 43 7/22/13 5:32 PM
44
Can’t load MakerBot
PLA Filament
into the extruder
Make a fresh cut at the end of the MakerBot PLA Filament.
Cut the filament at an angle—a narrow tipwill help with
loading. It is also important that the filament have no
bends in it.
If you are still having trouble, remove the fan assembly
as described in the “Cleaning the Drive Gear” section
beginning on Page 49. Load the filament again, watching
to see that it goes straight down through the extruder.
Extruder makes a clicking
noise when loading
MakerBot PLA Filament
This may mean a piece of filament is stuck in your extruder.
Use the “Cleaning the Drive Gear” section beginning on
Page 49 to remove the fan assembly and motor assembly.
Any filament stuck in the lower portion of the extruder can
be pulled from the heated extruder using a pair of pliers.
PROBLEM SOLUTION
Object is stuck to
build plate
Wait for the object to cool down. Objects will detach more
easily aer they have cooled.
If the object is still stuck, take a thin metal cra spatula and
carefully work the blade under the edge of the object. When
the blade is most of the way under the object, twist the handle
slightly. The object should come free.
E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
TROUBLESHOOTING Common Problems and How To Fix Them
MB2020_REP2_UserManual_V4.indd 44 7/22/13 5:32 PM
45
PROBLEM SOLUTION
E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
TROUBLESHOOTING CONTINUED
Can’t Remove MakerBot
PLA Filament
from the Extruder
Object won’t stick
to build plate
Object is stuck to build
plate (Continued)
Press down on the extruder arm and push a short length of the
filament through the heated extruder. Then, continuing to hold
down the extruder arm, try pulling the filament free again.
Relevel your build plate. Inconsistent plate height will lead
to inconsistent adhesion. If any one part of your object
does not adhere well to the build plate, the whole object
might peel o of the plate.
Ensure that the plate is clean. Tears, dust and oil from your
hands can prevent objects from sticking to the plate. Wipe
down the build plate with a clean, lint-free cloth.
If you are building on blue tape, consider building on the bare
acrylic plate instead. Objects will adhere better to the acrylic.
If you continue to have adhesion problems, loosen each of
the plate-leveling knobs about a quarter of a turn to bring
the plate slightly closer to the nozzle.
In the future, you can cover your build plate with blue tape.
This allows your objects to stick to the build plate but be
removed more easily.
MB2020_REP2_UserManual_V4.indd 45 7/22/13 5:32 PM
46 E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
DIAGNOSTICS LCD PANEL | TOP-LEVEL MENU
BUILD FROM SD Displays the list of models on the SD card. Select one to start a build
PREHEAT Allows you to preheat the extruder.
UTILITIES Tools that allow you to configure and maintain your
MakerBot Replicator 2.
INFO AND SETTINGS Optional settings and information about the MakerBot Replicator 2.
LCD: The Top-Level Menus
PROBLEM SOLUTION
TROUBLESHOOTING CONTINUED
Extrusion stops during
a build
Your build plate might be so close to the extruder that it is
preventing plastic from coming out of the nozzle. Tighten
each knob on the bottom of the build plate by a quarter
turn to move the platform farther from the extruder nozzle.
Extrusion could also stop if your MakerBot PLA filament has
been kept heated for too long. Unload the filament, cut a
fresh edge, and load the filament again.
NOTE: For more detailed troubleshooting information, see the MakerBot Replicator 2 Troubleshooting
page makerbot.com/support/replicator2/troubleshooting. For video walkthroughs of troubleshooting
issues, see the MakerBot Replicator 2 video collection makerbot.com/support/replicator2/videos.
MB2020_REP2_UserManual_V4.indd 46 7/22/13 5:32 PM
47E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
UTILITIES
Monitor Mode
Displays the current temperature of the extruder. When
making an object, displays the percent completed.
Level Build Plate
Script that walks you through the process of leveling
the build plate.
Home Axes
Moves the build plate and the extruder to the default
“home” positions.
Jog Mode
Allows you to control the movements of the extruder
and platform via the LCD panel.
Run Startup Script
Script that walks you through initial tasks to configure
the MakerBot Replicator 2 for your first build.
Enable Steppers
Engages the stepper motors. You cannot manually
move the build platform or the extruder when the
stepper motors are engaged. This option appears only
when the stepper motors are disengaged.
Disable Steppers
Disengages the stepper motors. You can manually
move the build platform or the extruder only when the
stepper motors are disengaged. This option appears
only when the stepper motors are engaged.
Blink LEDs
Blinks the LED lights on the MakerBot Replicator 2 at
about 4 blinks per second. When the LED lights are
blinking, this option is replaced by Stop Blinking.
Change Filament
Scripts that walk you through tasks associated with
the MakerBot PLA Filament.
LOAD: Script that walks you through the process of
loading the MakerBot PLA Filament.
UNLOAD: Script that walks you through the process
of unloading the MakerBot PLA Filament.
DIAGNOSTICS LCD PANEL | UTILITIES MENU
MB2020_REP2_UserManual_V4.indd 47 7/22/13 5:32 PM
48 E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
INFO AND SETTINGS
Bot Statistics
Displays the estimated total hours and minutes of
building in the lifetime of your Makerbot Replicator 2 and
the duration in hours and minutes of the last build.
Preheat Settings
Allows you to change the temperature setting for the extruder.
Use the up and down arrows to change the temperature, and
press the M button to save your setting. The preheat settings
also set Load and Unload temperatures.
General Settings
Optional settings and information.
SOUND: Turns the MakerBot Replicator 2’s indicator sounds
on or o.
LED COLOR: Allows you to turn o the LED lights or select
a color. Choices are Blue, Green, Pink, Orange, Purple, White,
and O.
ACCELERATE: Allows you to turn acceleration o.
Acceleration allows your MakerBot Replicator 2 to operate
more smoothly, and is turned on by default.
HEAT HOLD: Specifies a time period for your extruder to
continue heating when a 3D print is canceled.
HELP TEXT. Specifies whether you want verbose help text
[On] or abbreviated help text [O].
HEAT LEDs. Changes LED colors when the MakerBot
Replicator 2 is heating. When this option is set to On, the
LED color will change from blue to red during the heating
process and will return to the default color when the
process is complete.
TOOL COUNT: Specifies how many extruders your MakerBot
has. The MakerBot Replicator 2 has a single extruder.
HEATED PLATE: Specifies whether your MakerBot has a
heated build plate. The MakerBot Replicator 2 does not
have a heated build plate.
DIAGNOSTICS LCD PANEL | INFO AND SETTINGS MENU
MB2020_REP2_UserManual_V4.indd 48 7/22/13 5:32 PM
49E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
MAINTENANCE
Aer approximately 50 hours of build time, you should lubricate the threaded rod on your
Z-axis and the X-axis idler pulley. To lubricate the threaded rod and the idler pulley:
1. Find the tube of PTFE-based grease
included with your MakerBot Replicator 2.
2. Grasp both sides of the build platform
and push it gently to the bottom of the
MakerBot Replicator 2.
3. Use a clean, lint-free rag [or your finger]
to spread the PTFE-based grease onto the
top section of the threaded rod.
4. Make sure you get the grease inside of
the threads themselves.
5. Grasp both sides of the build platform and move it to the top of the MakerBot Replicator 2.
6. Use a clean, lint-free rag [or your finger] to spread the PTFE-based grease onto
the bottom section of the threaded rod. Make sure you get the grease inside of the
threads themselves.
Lubricating the Threaded Rod and the X-Axis Idler Pulley
INFO AND SETTINGS
Version Number
Displays the version number of the firmware.
Restore Defaults
Returns all the settings on the MakerBot Replicator 2 to
factory settings. When you select this option, a new menu
appears. Choose Yes or No.
DIAGNOSTICS LCD PANEL | INFO AND SETTINGS MENU
MB2020_REP2_UserManual_V4.indd 49 7/22/13 5:32 PM
50 E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
Lubricating the Threaded Rod and the X-Axis Idler Pulley | Continued
7. Locate the X-axis idler pulley. If you are
facing the front of the MakerBot Replicator 2,
the idler pulley is at the top le side. The idler
pulley is one of the pulleys that allow the
rubber belt to move the extruder from le to
right, or along the X-axis. The pulley at the
other side of the gantry is called the timing
pulley and does not require lubrication.
8. Squeeze a small amount of the PTFE-
based grease directly onto the exposed
area of the dowel inside the idler pulley and
manually move the pulley back and forth to
spread the grease.
MAINTENANCE CONTINUED
MB2020_REP2_UserManual_V4.indd 50 7/22/13 5:32 PM
51E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
MAINTENANCE CONTINUED
Cleaning the Drive Gear
The drive gear is the part of the extruder that pushes filament through the extruder. When you
make things with your MakerBot Replicator 2, small pieces of hardened PLA can stick to the
drive gear. If you are having problems with your extruder, cleaning the drive gear might help.
1. Unload the MakerBot PLA Filament
from the extruder. To start the script for
unloading the MakerBot PLA Filament,
go to the LCD panel and select
Utilities > Filament Options > Unload.
2. Unscrew the two bolts at the lower corners
of the fan guard using the 2.5 mm hex key
included with your MakerBot Replicator 2.
As one piece, remove the fan guard, the fan,
the heat sink, and spacers. Keep these pieces
together and set them aside.
3. Unclip the motor wires.
4. Pull the motor assembly out.
5. Find the drive gear on the motor sha.
Using a small instrument like a makeup
brush, toothbrush or toothpick, remove all
the pieces of filament stuck to the drive gear.
MB2020_REP2_UserManual_V4.indd 51 7/22/13 5:32 PM
52 E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
MAINTENANCE CONTINUED
Cleaning the Drive Gear | Continued
6. Reseat the motor assembly.
7. Plug in the motor wires.
8. Add the fan guard, the fan, the heat sink,
and spacers to the front of the extruder and
bolt them on.
9. Reload the MakerBot PLA Filament. To
do this, go to the LCD panel and select
Utilities > Filament Options > Load.
MB2020_REP2_UserManual_V4.indd 52 7/22/13 5:32 PM
53
MAINTENANCE CONTINUED
Updating Your Firmware
Keeping your firmware up to date will ensure that your MakerBot Replicator 2 always
operates at its best. When a new version of your bot’s firmware is available, MakerWare
will display a message letting you know that it’s time to update. To update your firmware,
follow these steps:
1. Locate the USB-A to USB-B cable that came with your MakerBot Replicator 2 and use
it to connect your Replicator 2 to your computer.
2. Choose “Upload Firmware” from the MakerBots menu. MakerWare will walk you through
the rest of the steps necessary to upload new firmware.000
E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
MB2020_REP2_UserManual_V4.indd 53 7/22/13 5:32 PM
54
E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
ACTIVE COOLING FAN: The fan that
cools the MakerBot PLA Filament as
it extrudes.
BLUE TAPE: Blue masking tape that
makes a great build surface for objects
printed with MakerBot PLA Filament. You
can find blue tape at any hardware store.
BUILD PLATE: The acrylic surface on
which the MakerBot Replicator 2 builds
an object.
BUILD PLATFORM: The support for the
build plate. The build platform includes
knobs for manual leveling.
DRIVE GEAR: The gear that drives the
MakerBot PLA Filament into the heater.
EXTRUDER: The assembly that draws
the filament from the spool, melts it,
and pushes it through the nozzle onto
the build plate.
EXTRUDER FAN: The fan that keeps the
MakerBot Replicator 2 motor cool and
disperses heat from the heat sink.
FAN GUARD: The grill that protects the
extruder fan and protects the user
from the fan.
FILAMENT GUIDE TUBE: The plastic tube
that guides the MakerBot PLA Filament
from the filament spool to the extruder.
FIRMWARE: The soware that runs on
your MakerBot Replicator 2.
GANTRY: The metal rods that allows the
MakerBot Replicator 2’s extruder to move
on the X and Y axes.
GCODE: The computer language used
to describe the toolpath your MakerBot
Replicator 2 will use to build an object.
GCode is converted to X3G before being
saved to your SD card.
HEAT SINK: The component that
dissipates heat from the cartridge heater.
It looks like an aluminum plate with fins.
LCD CONTROL PANEL: The liquid-
crystal display at the front lower right
corner of the MakerBot Replicator 2. This
control panel provides status information
about the MakerBot Replicator 2 and
includes control menus and diagnostics.
MAKERBOT PLA FILAMENT: Polylactic
acid filament. PLA is a renewable
bioplastic. MakerBot PLA Filament is the
source material from which you make
objects on the MakerBot Replicator 2.
MAKERWARE: Free software created
by MakerBot that allows you to load,
rotate, scale and move 3D models and
create the toolpaths the MakerBot
Replicator 2 uses to build objects.
GLOSSARY OF TERMS
MB2020_REP2_UserManual_V4.indd 54 7/22/13 5:32 PM
55
MOTOR ASSEMBLY: The stepper motor
and the drive block that push filament
into the extruder.
MOTOR WIRES: The bundle of electrical
wires that provide power to the motor.
NOZZLE: The opening on the end of the
extruder from which heated MakerBot
PLA Filament emerges to be spread onto
the build plate.
POWER SUPPLY: The A/C power supply
for the MakerBot Replicator 2. It includes
a block and two plugs.
REPLICATO RG: Free, open source
soware that allows you to manipulate
.stl files and GCode files and save them to
be printed on the MakerBot Replicator 2.
SD CARD: Secure Digital memory card
that can store digital data and be read
by the MakerBot Replicator 2. The SD
card used with your MakerBot Replicator
2 must be formatted FAT16 with a
maximum capacity of 2GB.
SLICING: The process of turning a 3D
model into instructions for your MakerBot.
Slicing results in a GCode or .x3g file.
SPACERS: The plastic pieces that keep
the extruder fan and heat sink secure
and in place.
SPOOL HOLDER: The plastic piece that
attaches to the back of the MakerBot
Replicator 2 and holds the spool of
MakerBot PLA Filament. The spool holder
ensures that the MakerBot PLA Filament
is fed evenly to the extruder.
.THING: A file format used by MakerWare
that allows you to print multiple 3D
models on the same build plate.
THINGIVERSE: A website for uploading
and downloading 3D model files for use
with the MakerBot Replicator 2.
THREADED ROD: The long rod behind
the build platform that is threaded
along its entire length. This rod allows
the build platform to move up and
down, or along the Z-axis.
TOOLPATH: The set of instructions your
MakerBot will use to build an object.
Toolpaths for the MakerBot Replicator 2
must be saved as an X3G file.
.STL: A widely used file format for
3D models.
USB CABLE: A cable that allows your
computer to communicate with the
MakerBot Replicator 2 in order to
update firmware.
.X3G: A compact format for describing
the toolpath your MakerBot Replicator 2
will use to build an object.
GLOSSARY OF TERMS CONTINUED
E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
MB2020_REP2_UserManual_V4.indd 55 7/22/13 5:32 PM
56 E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
CONTACT US
SUPPORT
SALES
FEEDBACK
makerbot.com/support
Our website has extensive documentation and troubleshooting
information about your MakerBot Replicator 2 Desktop 3D
Printer. It’s a great resource when you want to try to solve issues
quickly on your own.
support@makerbot.com
If you ever need help resolving an issue with your MakerBot
Replicator 2, send an email to the address above to open a ticket
with the MakerBot Support Team. To help us understand your
problem from the start, it is very helpful to include pictures or a
video as attachments with your email.
store.makerbot.com
To learn about other MakerBot products, including MakerBot PLA
Filament, please visit our online store.
sales@makerbot.com
If you have additional questions about any MakerBot product,
please email our Sales Team at the address above or call us at
(347) 334-6800.
thoughts@makerbot.com
For general questions, or to tell us what’s on your mind, send an
email to the address above. We love to hear from you, and using
this email address helps keep our Sales and Support lines free
for customers in need.
MB2020_REP2_UserManual_V4.indd 56 7/22/13 5:32 PM
57
SAFETY AND COMPLIANCE
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: “How to Identify
and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S.
Government Printing Oce, Washington D.C. 20402.
Changes and Modifications not expressly approved by the manufacturer or registrant of this
equipment can void your authority to operate this equipment under Federal Communications
Commissions rules.
F TERMS OF SERVICE
I. T. E.
MB2020_REP2_UserManual_V4.indd 57 7/22/13 5:32 PM
58 F TERMS OF SERVICE
WARRANTY, RETURNS, AND REPLACEMENT POLICY
MakerBot products do not carry a long-term warranty. Returns are possible only on
unaected items, within 14 days of receipt. Aer such time, all sales are considered final.
“Unaected” means a device has never been assembled, powered up, programmed, or
otherwise changed. MakerBot cannot accept returns on purchased items that have had
electrical power applied to them, or been otherwise programmed, changed, or aected.
However, we will provide parts or service on items that prove to be defective from the time of
manufacture, and we’ll always work with you to get your bot running again.
TERMS OF SERVICE
Please be advised of the following terms (the “Terms”) regarding this User Manual (the “Manual”):
All information in this Manual is subject to change at any time without notice and is
provided for convenience purposes only. MakerBot reserves the right to modify or revise the
Manual in its sole discretion and at any time. You agree to be bound by any modifications
and/or revisions. Contact the MakerBot Support Team for up-to-date information.
The design of this Manual and all text, graphics, information, content, and other material
are protected by copyright and other laws. The contents are Copyright (c) 2009, 2010,
2011, 2012, 2013 MakerBot Industries, or our respective aliates and suppliers. All rights
reserved. Certain trademarks, trade names, service marks and logos (the “Marks”) used are
registered and unregistered trademarks, trade names and service marks of MakerBot and
its aliates. Nothing contained in this Manual grants or should be construed as granting,
by implication, estoppel, or otherwise, any license or right to use any Marks without the
written permission of MakerBot. Any unauthorized use of any information, materials or
Marks may violate copyright laws, trademark laws, laws of privacy and publicity, and/or
other laws and regulations.
MB2020_REP2_UserManual_V4.indd 58 7/22/13 5:32 PM
59F TERMS OF SERVICE
TERMS OF SERVICE CONTINUED
DISCLAIMERS. Neither MakerBot nor any of our aliates warrant the accuracy or
completeness of the information, products or services provided by or through this Manual,
which are provided “as is” and without any express or implied warranties of any kind,
including warranties of merchantability, fitness for a particular purpose, or non-infringement
of intellectual property. To the fullest extent permissible by the applicable law, we hereby
disclaim all liability for product defect or failure, claims that are due to normal wear, product
misuse, abuse, product modification, improper product selection, non-compliance with
any codes, or misappropriation. To the fullest extent permissible by the applicable law, we
hereby disclaim any and all responsibility, risk, liability and damages arising out of death or
personal injury resulting from assembly or operation of our products. MakerBot assumes
no responsibility, nor will be liable, for any damages to, or any viruses or malware that may
infect your computer, telecommunication equipment, or other property caused by or arising
from your downloading of any information or materials related to MakerBot products. The
foregoing exclusions do not apply to the extent prohibited by law; please refer to your local
laws for any such prohibitions. We make no warranties to those defined as “consumers” in
the Magnuson-Moss Warranty-Federal Trade Commission Improvements Act.
LIMITATIONS OF LIABILITY. In no event will MakerBot or any of our respective ocers,
directors, employees, shareholders, aliates, agents, successors or assigns, nor any party
involved in the creation or production of our products be liable to you or anyone else for
any indirect, special, punitive, incidental or consequential damages (including, without
limitation, those resulting from lost profits, lost data or business interruption) arising out
of the use, inability to use, or the results of use of this Manual, whether based on warranty,
contract, tort or any other legal theory and whether or not advised of the possibility of such
damages. The foregoing limitations of liability do not apply to the extent prohibited by law;
please refer to your local laws for any such prohibitions.
CHOICE OF LAW; JURISDICTION. These Terms will be governed by and construed in
accordance with the laws of the State of New York, without giving eect to any principles
of conflicts of laws. Any action seeking legal or equitable relief arising out of or relating to
these Terms or the Manual will be brought only in the courts of the State of New York or the
United States District Court for the District of New York.
MB2020_REP2_UserManual_V4.indd 59 7/22/13 5:32 PM
MakerBot One MetroTech Center, 21st Floor, Brooklyn, NY support@makerbot.com makerbot.com
MB2020_REP2_UserManual_V4.indd 60 7/22/13 5:32 PM
… 59

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MakerBot Replicator 2 - MB1036 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MakerBot Replicator 2 - MB1036 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van MakerBot Replicator 2 - MB1036

MakerBot Replicator 2 - MB1036 Gebruiksaanwijzing - Deutsch - 45 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info