581720
54
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
6
5.5 FILTERWAHLSCHALTER KANAL 3 UND 4 (9), FILTERPOSITION DUPE
In Stellung DUPE bekommt Kanal 3/4 das Eingangssignal vom Vorverstärker der Kanäle 1/2 und übernimmt die Filtereinstellungen von
Kanal 1/2 (Bandpass, Bass Boost). Die Lautstärke von Kanal 3/4 ist unabhängig von Kanalpaar 1/2 einstellbar.
5.6 WAHLSCHALTER FÜR DEN KANALMODUS 2CH/4CH (11)
Im 2-Kanal-Modus (Schalterstellung „CH2“) bekommt Kanal 3/4 des Verstärkers das Eingangssignal von den Cinchbuchsen der Kanäle
1/2. Der Wahlschalter erübrigt so die Verwendung von zusätzlichen T-Steckern.
5.7 AUSGÄNGE ZUM ANSCHLUSS WEITERER VERSTÄRKER
Das Eingangssignal der LINE INPUT Anschlüsse CH1, CH2, CH3, CH4 (1 und 2, s. Bild 7) wird summiert und an die Ausgangsbuchsen
OUTPUT (3) weitergeleitet. Die OUTPUT Anschlüsse ermöglichen den Anschluss eines Subwooferverstärkers ohne zusätzliche T-Stecker
und Kabel.
BILD 1 STROMVERSORGUNGS- / FERNEINSCHALTUNGSANSCHLÜSSE
(1) Anschlussklemme GND für die Masse, zum Minuspol der Batterie
(2) Anschlussklemme REM für die Ferneinschaltung
(3) Anschlussklemme für +12 V Batteriespannung
(4) Batterie
(5) Kabelsicherung
(6) Zum Automatikantennenanschluss Ihres Autoradios
Wenn Ihr Autoradio nicht mit einem Automatikantennenanschluss ausgestattet ist, ist dieses Kabel mit dem Pluspol (+) am
Zündschloss zu verbinden. In diesem Fall sollte ein Ein-/Ausschalter zwischengeschaltet werden. Achten Sie darauf, dass dieser
Schalter ausgeschaltet wird, wenn der Verstärker nicht benutzt wird.
BILD 2 4-KANAL-BETRIEB
Soll der Verstärker von einem Autoradio mit 4 Ausgangskanälen angesteuert werden und 4 Lautsprecher betreiben, dann sind die
Anschlüsse und Einstellungen wie in Bild 2 gezeigt vorzunehmen:
(1) Zum Autoradio, Ausgang links vorn
(2) Zum Autoradio, Ausgang rechts vorn
(3) Zum Autoradio, Ausgang links hinten
(4) Zum Autoradio, Ausgang rechts hinten
(5) Lautsprecher links vorn
(6) Lautsprecher rechts vorn
(7) Lautsprecher links hinten
(8) Lautsprecher rechts hinten
BILD 3/4 3-KANAL-BETRIEB
Im 3-Kanal-Betrieb wird das Hochpassfilter für die Kanäle 1/2 sowie das Tiefpass-Filter für die Kanäle 3/4 eingesetzt. Ihre Verwendung
wird im Absatz 5 erklärt.
BILD 3
Soll der Verstärker von einem Autoradio mit Stereoausgang angesteuert werden und Stereo-Satellitenlautsprecher und einen Subwoofer
betreiben, dann sind die Anschlüsse und Einstellungen wie in Bild 3 gezeigt vorzunehmen.
(1) Zum Autoradio, Ausgang links
(2) Zum Autoradio, Ausgang rechts
(3) Satellitenlautsprecher links
(4) Satellitenlautsprecher rechts
(5) Subwoofer
BILD 4
Soll der Verstärker von einem Autoradio mit Stereoausgang und separatem Subwooferausgang angesteuert werden und Stereo-
Satellitenlautsprecher und einen Subwoofer betreiben, dann sind die Anschlüsse und Einstellungen wie in Bild 4 gezeigt vorzunehmen.
(1) Zum Autoradio, Ausgang links
(2) Zum Autoradio, Ausgang rechts
(3) Zum Autoradio, Subwooferausgang
(4) Satellitenlautsprecher links
(5) Satellitenlautsprecher rechts
(6) Subwoofer
7
BILD 5 2-KANAL-BETRIEB
Soll der Verstärker eine höhere Leistung erzielen zum Betrieb zweier Subwoofer, dann sind die Anschlüsse und Einstellungen wie in Bild
5 gezeigt vorzunehmen. Der Einsatz des verwendeten Bandpassfilters wird in Kapitel 5 beschrieben.
(1) Zum Autoradio, Ausgang links
(2) Zum Autoradio, Ausgang rechts
(3) Subwoofer
(4) Subwoofer
BILD 6 BETRIEB ALS VERSTÄRKER FÜR 4 SATELLITENLAUTSPRECHER UND EINES SUBWOOFERS UNTER VERWENDUNG
EINES ZUSÄTZLICHEN 1-KANAL-VERSTÄRKERS (POWER CORE ONE)
(1) Zum Autoradio, Ausgang links vorn
(2) Zum Autoradio, Ausgang rechts vorn
(3) Zum Autoradio, Ausgang links hinten
(4) Zum Autoradio, Ausgang rechts hinten
(5) Lautsprecher links vorn
(6) Lautsprecher rechts vorn
(7) Lautsprecher links hinten
(8) Lautsprecher rechts hinten
(9) Subwoofer
BILD 7 BEDIENUNGSELEMENTE UND EIN-/AUSGÄNGE
(1) Niederpegeleingänge (Kanal 3/4)
(2) Niederpegeleingänge (Kanal 1/2)
(3) Niederpegelausgänge (Summensignal aus CH1, CH2, CH3, CH4)
(4) Eingangspegelregler Kanal 1/2
(5) Eingangspegelregler Kanal 3/4
(6) Übergangsfrequenzregler für den Hochpass (Kanal 1/2)
(7) Übergangsfrequenzregler für den Hochpass (Kanal 3/4)
(8) Wahlschalter FULL / HP (Hochpassfilter) / LP/BP (Bandpass) für Kanal 1/2
(9) Wahlschalter FULL / HP (Hochpassfilter) / DUPE für Kanal 3/4
(10) Übergangsfrequenzregler für den Tiefpass (Kanal 1/2)
(11) Kanalmodus-Wahlschalter
(12) Bass-Boost-Regler (Kanal 1/2)
8
Dear MAGNAT Customer,
The POWER CORE FOUR car hi-fi power amplifier will enable you to satisfy your high demands on sound reproduction in your car. With
its impressive deep-bass power reserves, low harmonic content and neutral reproduction, the POWER CORE FOUR takes car hi-fi to new
heights. The amplifier is characterized by low operating current, rapid switching capabilities and excellent temperature stability. Increased
output power can be achieved by switching two amplifier channels in an amplifier together in bridging mode. Experience and enjoy how
this high-tech machine perfectly reproduces magnificent sound.
Please read all of the owner’s manual before installing and using the amplifier.
1. TECHNICAL DATA
Stereo / Bridged
Max. output power (1 kHz sinus burst 2:8, B+=14.4V) 4 x 250 W / 2 x 700 W on 4 Ohm
Nominal output power (DIN 45 324, B+=14.4V) 4 x 100 W / 2 x 280 W on 4 Ohm
Max. output power (1 kHz sinus burst 2:8, B+=14.4V) 4 x 350 W on 2 Ohm
Nominal output power (DIN 45 324, B+=14.4V) 4 x 140 W on 2 Ohm
Loudspeaker impedance (stereo) 2 – 8 Ohm
Frequency response 5 – 50 000 Hz (-3 dB)
Total harmonic content (DIN 45 403) < 0.05% (1 kHz)
Stereo separation (IEC 581 ) > 60 dB (1 kHz)
Weighted noise distance (IEC A) > 100 dB
Input sensitivity LOW LEVEL INPUT 200 mV – 6 V
Input impedance LOW LEVEL INPUT 20 kOhm
Low-pass filter (channel 1 and 2) 30 – 150 Hz, 12 dB per octave
High-pass filter 10 – 200 Hz, 12 dB per octave
Bass boost (channel 1 and 2) 0…12 dB at 45 Hz
Supply +12 V (10 – 14.4 V), minus to ground
Fuse 2 x 40 A
Sizes (W x H x D) 382 x 41 x 198 mm
Weight 3.6 kg
SUBJECT TO TECHNICAL CHANGE
2. FEATURES
· Complementary push-pull final stage
· Automatic switching on/off via car radio
· Channel 1 and 2:
· High-pass and low-pass filters (band-pass) with continuously adjustable crossover frequency
· Infinitely variable bass equalisation
· Channel 3 and 4:
· Infinitely adjustable high pass filters
· DUPE circuit for duplicating the output signal of the channel 1 and 2 filters (bandpass and bass boost) at channel 3 and 4.
· Adjustable input sensitivity
· Bridgeable 4-/2-channel mode
· Tri-mode
· Electronic protective circuit against short circuiting, DC offset and excess temperature
· Mute switch for suppressing switch-on crackle interference
· Low-level outputs (cinch jacks) for connecting a subwoofer amplifier
· Status indicator (green LED) and overload indicator (red LED)
3. IMPORTANT INSTALLATION INFORMATION
· This appliance may only be connected to a 12 volt system with negative ground.
· The heat radiated when the amplifier is used means that sufficient air circulation is required at the place of installation. It is very
important that the cooler’s cooler ribs do not contact any metal plating or any surfaces which could impair air circulation. The
amplifier may not be installed in small confined spaces or spaces without air circulation (e.g. spare wheel recess or under the vehicle
carpeting). Installation in the boot is recommended.
· Install the amplifier in such a way that it is protected as far as possible against vibrations and dust and dirt.
· Make sure that the input/output cables are sufficiently distant from the power supply cables as otherwise interference may occur.
· Make sure that the fuse and operating elements are accessible after installation.
· The appliance’s reliability and performance depend on the quality of installation. Preferably get an expert to install the system,
particularly if you want to install several loudspeakers or a complex multi-way system.
4. CONNECTIONS
4.1 POWER SUPPLY AND AUTOMATIC SWITCHING ON
Important notice: Before commencing the installation, disconnect the plus terminals from the car battery in order to prevent
short circuits.
The power cabling usually installed in on-board car networks is not sufficient for a power amplifier’s demands. Make sure that the power
lines to GND and to the +12 V terminal have been sufficiently specified. A cable cross-section of at least 25 mm² must be used to connect
the battery to the amplifier’s terminals.
Wir gratulieren Ihnen! Durch Ihre kluge Wahl sind Sie Besitzer eines MAGNAT HiFi-Produktes geworden. MAGNAT
HiFi-Produkte erfreuen sich aufgrund der hohen Qualität eines ausgezeichneten Rufes weltweit. Dieser hohe Qualitätsstandard
ermöglicht es für MAGNAT HiFi-Elektronik 2 Jahre Garantie zu gewähren.
Die Produkte werden während des gesamten Fertigungsvorganges laufend kontrolliert und geprüft. Im Servicefall beachten Sie
bitte folgendes:
1. Die Garantiezeit beginnt mit dem Kauf des Produktes und gilt nur für den Erstbesitzer.
2. Während der Garantiezeit beseitigen wir etwaige Mängel, die nachweislich auf Material- oder Fabrikationsfehler beruhen, nach
unserer Wahl durch Austausch oder Nachbesserung der defekten Teile. Weitergehende Ansprüche, insbesondere auf Minderung,
Wandlung, Schadenersatz oder Folgeschäden sind ausgeschlossen. Die Garantiezeit wird von einer Garantieleistung durch uns
nicht berührt.
3. Am Produkt dürfen keine unsachgemäßen Eingriffe vorgenommen worden sein.
4. Bei Inanspruchnahme der Garantie wenden Sie sich bitte zunächst an Ihren Fachhändler. Sollte es sich als notwendig erweisen,
das Produkt an uns einzuschicken, so sorgen Sie bitte dafür, dass • das Produkt in einwandfreier Originalverpackung verschickt
wird, • die Kontrollkarte ausgefüllt dem Produkt beiliegt, • die Kaufquittung beigefügt ist.
5. Von der Garantie ausgenommen sind: • Leuchtmittel • Verschleißteile •Transportschäden, sichtbar oder unsichtbar (Reklama-
tionen für solche Schäden müssen umgehend bei der Transportfirma, Bahn oder Post eingereicht werden.) Kratzer in Metall-
teilen, Frontabdeckungen u.s.w. (Diese Defekte müssen innerhalb von 5 Tagen nach Kauf direkt bei Ihrem Händler reklamiert
werden.) Fehler, die durch fehlerhafte Aufstellung, falschen Anschluss, unsachgemäße Bedienung (siehe Bedienungsanleitung),
Beanspruchung oder äußere gewaltsame Einwirkung entstanden sind. Unsachgemäß reparierte oder geänderte Geräte, die
von anderer Seite als von uns geöffnet wurden. • Folgeschäden an fremden Geräten • Kostenerstattung bei Schadensbehebung
durch Dritte ohne unser vorheriges Einverständnis.
Congratulations! You have made a wise selection in becoming the owner of a MAGNAT HiFi equipment. Due to high
quality MAGNAT products have earned an excellent reputation through the western world. And this high quality standard enables
us to grant a 2-years warranty for MAGNAT HiFi-electronic components.
The equipments are checked and tested continously during the entire production process. In case you have problems with your
MAGNAT HiFi equipment, kindly observe the following:
1. The guarantee period commences with the purchase of the component and is applicable only to the original owner.
2. During the guarantee period we will rectify any defects due to faulty material or workmanship by replacing or repairing the
defective part at our discretion. Further claims, and in particular those for price reduction, cancellation of sale, compensation
for damages or subsequential damages, are excluded. The guarantee period is not altered by the fact that we have carried out
guarantee work.
3. Unauthorized tampering with the equipment will invalidate this guarantee.
4. Consult your authorized dealer first, if guarantee service is needed. Should it prove necessary to return the component to the
factory, please insure that the component is packed in original factory packing in good condition the quality control card has
been filled out and enclosed with the component, • your enclose your receipt as proof of purchase.
5. Excluded from the guarantee are: • Illuminates • Wear parts • Shipping damages, either readily apparent or concealed (claims
for such damages must be lodged immediately with forwarding agent, the railway express office or post office). Scratches in
cases, metal components, front panels, etc. (You must notify your dealer directly of such defects within three days of purchase.)
Defects caused by incorrect installation or connection, by operation errors (see operating instructions), by overloading or by
external force. Equipments which have been repaired incorrectly or modified or where the case has been opened by persons
other than us. Consoquential damages to other equipments. • Reimbursement of cools, without our prior consent, when repairing
damages by third parties.
Toutes nos félicitations!
Vouz avez bien choisi et êtes le propriétaire heureux d’un produit MAGNAT. Les produits MAGNAT ont une excellente réputation
pour leur bonne qualité. Pour cette raison, nous accordons 2 ans de garantie sur les amplificateurs MAGNAT.
Les appareils sont soumis pendant toutes les opérations de fabrications à des contrôles et vérifications constants. Si, pourtant,
vous rencontrez des difficulés avec votre appareil MAGNAT veuillez tenir compte de ce qui suit:
1. La garantie débute avec l’achat de l’appareil et est valable uniquement pour le premier propriétaire.
2. Pendant la période de garantie nous réparons les dommages provenant des défauts de matériel ou de fabrication et nous
procédons, à notre guise, à l’échange ou à la réparation des pièces défectueuses.
3. Aucune réparation impropre ne doit avoir été effectuée à l’appareil.
4. Lors d’une demande de garantie, veuillez vous adresser en premier lieu à votre distributeur. Si ce dernier décide que l’appareil
doit nous être retourné, veuillez tenir compte que: l’appareil soit expédié dans son ermballage d’origine, la carte de contrôle
dûment remplie soit jointe, • le bon d’achat soit joint.
5. Ne sont pas compris dans la garantie: • Matériel d’eclairage • Pièces d’usure • Avaries de transport, visibles ou non (de telles
réclamations doivent être faites immédiatement auprès du transporteur, du chermin de fer ou de la poste). • Des rayures sur le
boîtier, pièces métalliques, couvercles etc. (ces dommages doivent être signalés directement à votre distributeur dans les trois
jours suivant l’achat). Dommages résultant d’un raccordement incorrect, maniement incorrect (voir instructions de service),
surcharge ou application de force extérieure. Appareils réparés non conformément ou modifiés et qui ont été ouverts par une
personne autre que nous. • Dommages ultérieurs à d’autres appareils. • Remboursement des frais à des tiers ayant effectué les
réparations sans notre accord préalable.
54

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Magnat Power Core Four bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Magnat Power Core Four in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Zweeds als bijlage per email.

De handleiding is 1,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info