616524
40
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
40
www.magix.com
the right (6). You can monitor the recording level on the LED display during
recording. If the display reaches the upper LEDs, clipping occurred at some
point. In this case, you should definitely check the recording for clipping and, if
necessary, repeat the recording using a lower recording level.
7. At the end of the recording you will be asked if you want to use the recording.
The newly-recorded material will be placed at the current position of the
playback marker in the project.
Note: If there is no level displayed, chances are the wrong input has been selected.
Open the record settings dialog using the "Settings..." button and click on "Audio
input" to correct the error with Automatic input and level (view page 43).
Basic knowledge about recording with the PC
The record function converts analog audio signals – records, tapes, sounds, speech –
into digital data, which can be saved on the PC and edited with MAGIX Audio &
Music Lab 2014 Premium.
The device which is used to digitalize the audio signals is already built into most
sound cards and aptly called an analog-digital converter, often abbreviated with A-to-
D, ATD or A/D. In order to record sounds, the A/D converter takes samples of the
sound to be digitalized at fixed intervals by measuring the voltage level of the signal.
The frequency of the sampling is called the sample rate and naturally lies within the
kHz frequency range; several thousand times per second. The higher the sample rate,
the more samples are recorded by the A/D converter, thus making the sound
conversion closer to the original.
The precision with which the A/D converter measures the voltage level of the analog
signal is determined by the sample resolution. The same principle applies here: The
finer the resolution, the better and more natural the digital conversion.
Audio recordings in CD quality are recorded with a sample rate of 44.1 kHz and a
resolution of 16 bits.
Connecting the source for recording
First of all, the source of the audio material must be connected to the sound card
input. Again, there are several possibilities which primarily depend on the type of
equipment you have.
If you are recording from a microphone, then please connect the microphone to the
microphone jack on your sound card (usually red).
If you want to record material from a stereo system, then you can use the line-out or
AUX out jacks on the back of your amplifier or tape deck. This involves connecting
them to the sound card input (usually red).
If your amplifier has no separate output (other than for the speakers), then you can
use the connection intended for headphones for your recordings. In most cases, you
40

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Magix Audio cleaning lab 2014 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Magix Audio cleaning lab 2014 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info