578638
9
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
22
23
UK
Start
Start
IRL
UK IRL
Installation using the WPS key (repeater mode)
The quickest, easiest and reliable way to establish a wi-
reless connection between the repeater and the WLAN
router, is the WPS button.
NOTE!
This connection method requires both devices
to contain a WPS button. As factory setting, the
WPS button is set to 2.4G radio mode. To log-in
as a dual band router, whose WPS function is
activated in the 5G radio mode, the WPS button
of the Web Interface must first be set to the 5G
radio mode.
1. Hold down the WPS button on the repeater for at least
5 seconds.
2. After 5 seconds the Power/WPS LED flashes three
times.
3. The WPS function is now active and waits for the WPS
connection.
4. Next press the WPS button of your router to be
connected to the repeater. This step must be carried
out within two minutes. The connection is set up and
the network information is exchanged.
5. When the connection has been established, the Pow-
er/WPS LED is lit permanently.
6. If the Power/WPS LED flashes, a connection fault has
occurred. Wait two minutes until the LED is switched
off and restart the connection.
7. The 5G and 2.4G signal LEDs show whether or not the
connection is fully set up.
8. Use the Web interface in order to call up the extended
settings after successful WPS connection or to ma-
nually establish the connection in case of a failed WPS
connection.
After having restarted the repeater you can log into
the access point with your computer through the
repeater. The network detection is the same as the
SSID of the access point.
The network key and the encoding are handled by
the router.
Manual installation through WEB interface
1. Connect the LAN connection of your computer to the
LAN socket of the repeater using the LAN cable. When
logging in as “Wi-Fi repeater” you can alternatively
use the WLAN interface of your computer. Search
amongst the available wireless networks for the
network “Wi-Fi repeater” and connect to the network.
Dismiss the Windows suggestion of setting up the
network through Windows Setup and select the opti-
on “Connect to network without setup”.
2. Open your Web browser and enter IP address
192.168.10.1.
3. The log-in window of the repeater appears. Enter the
default user name “admin” and the default password
“admin”. Click on “Ok”.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Maginon-WLR-510

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Maginon WLR-510 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Maginon WLR-510 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Maginon WLR-510

Maginon WLR-510 Gebruiksaanwijzing - Deutsch - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info