Before you begin … The most important thing is to UNPLUG the
Power Base!
Then … Use a damp rag to wipe down the inside and outside of the
Power Base.
Sometimes the base gets so dirty … that the little white sliders
that activate the Magic Bullet get sticky. This can cause the motor to
continue to spin even after you’ve released the cup. When this
happens, start by UNPLUGGING the Power Base.
Then … Double-check that you’ve UNPLUGGED the Power Base,
and use a damp rag to soften up the gunk around the activators as
you work the activator buttons up and down until they move freely
again.
NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE
IT IN DISHWASHER
Never put your hands or utensils near the moving
blade and never use your hands or utensils to press
the activator buttons down while the Power Base is
plugged in.
Cleaning the Magic Bullet
Everyone hates cleaning up, which is just one more reason the
Magic Bullet is so great. You can make and cook fresh homemade
spaghetti meat sauce (see recipe on Page 69) from scratch and only
use one tall Bullet cup! Imagine delicious, piping hot pasta sauces,
salsa, fresh soups and more, all prepared with no cutting boards, no
pots and pans, just a single cup and blade to put in the dishwasher.
It doesn’t get any easier than that.
Always unplug the Magic Bullet when cleaning or assembling.
Washing Magic Bullet Attachments
It is so easy … Just place any of the pieces (except for the Power
Base) on top shelf of the dishwasher, or hand wash with warm soapy
water and rinse.
Always make sure the gaskets are still inside after cleaning.
The heat from some dishwashers can cause them to become
loose and pop out.
Stubborn cleanup When you let ingredients dry in the Magic
Bullet, or when you’ve melted cheese in the cups, make your
cleanup a snap by filling the cup with soapy water and
microwaving it for one minute. That will loosen the stuck
ingredients and with a light scrub, you’ll be all done.
Cleaning the Magic Bullet Power Base
For the most part the Power Base doesn’t really get dirty, but if
you neglect to twist the blade onto the cup tightly, liquids can leak
out and get into the base and activator buttons. Here’s how to clean
it up.
28 29
Easy Clean UpEasy Clean Up
Easy Clean UpEasy Clean Up