494089
8
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
MACROM INGLESE 44.05/07 14 OTTOBRE 1992 10
CONNECTIONS
CONNECTIONS (Fig. 2, page 3)
13 Positive output terminal, speaker A, or positive output speaker E
14 Negative output terminal, speaker A
15 Positive output terminal, speaker B
16 Negative output terminal, speaker B, or negative output speaker E
17 Positive output terminal, speaker C, or positive output speaker F
18 Negative output terminal, speaker C
19 Positive output terminal, speaker D
20 Negative output terminal, speaker D, or negative output speaker F
21 2x20/2x25 A fuses
22 Power supply terminal +12 V to the battery (BATT)
23 Terminal for connection of the negative ground lead (GND)
24 Terminal for remote switch-on (REMOTE)
25 Check control status indicator
CONNECTIONS:
Battery lead: Connect the terminal BATT 22 to the battery cable of the car by means of a
(yellow) cable of adequate section.
Do not connect this lead to circuits existing within the electric system of the car. In order to avoid
damage to the car it is imperative that this lead be fitted with a fuse (not provided) as near as
possible to the battery. This connection is the to be carried out last.
Remote switch-on lead: Connect the remote switch-on lead (REMOTE) or the control lead of
the power antenna coming from the head unit (blue) to the REMOTE 24 terminal of the amplifier.
NOTE: In case this lead is not connected, the amplifier will not be switched on when the head
unit is switched on. If your head unit is not fitted with an outlet for a power antenna, a quick-break
lever switch (SPST) shall be installed between the power source (+12 V) and the remote switch-
on lead and connected to the REMOTE 24 terminal so as to provide for manual switch-on of
the amplifier.
Ground lead: Secure the ground lead (black) to a clean spot on the car chassis and to the GND
terminal 23 . Make sure that there is electric continuity between this spot and the negative
terminal of the battery. The ground cable should be as short as possible; in case more than one
amps are used, connect all the ground connectors to one spot.
Fuse: In case of fuse replacement make sure to replace it with a fuse of the same amperage.
The use of fuses with the wrong amperage may seriously damage the components of the unit.
Speaker outlet terminals: Make sure to keep the right polarity and phase on connecting the
speakers. This includes the control of the right polarity, positive (+) and negative (-).
NOTE: The negatives of the speakers should NEVER be connected witch each other and no
common ground lead must be used.Non adequately isolated wires should never come into
contact with each other, with metallic parts of the car or with the ground lead.
RCA input connectors: Connect the Pre output leads of your head unit to the RCA input
connectors by means of RCA extension cables (90.05-90.10-90.25-90.50 by MACROM).
Make sure to observe the right channel designation: left L (white) and right R (red).
1.
2.
3.
4.
5.
6.
10
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Macrom 44.05 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Macrom 44.05 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info