643528
30
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
Chapter 5
INSTALLATION AND USE MANUAL
page 30
Comfort air kit Technical service – MCZ Group S.p.A. all rights reserved - Reproduction prohibited
MANUAL mode (MAN LED on 4b)
The fan runs at the selected speed independently of the
temperature measured by the sensor. When the stove unit is
turned on, on the control unit place selector 4 in manual 4b.
The speed of the fan is set using the knob (3).
With the knob turned completely to the left, the fan is off as is
the indicator light (1). Turn the knob to the right to change
from “OFF” to “ON” (indicator light 1 on). If you continue
turning the knob to the right, the speed of the fan will gradually
increase (indicator light 2 on).
In manual mode, the fan will operate in a mode regardless of
the probe, and will therefore be controlled by the knob (3)
5.5.3. Safety function
When knob 3 is in the off position, the safety function is active.
If the temperature probe reaches the safety threshold, the
fans come on at minimum speed to prevent overheating of the
structure.
If the safety function trips frequently, contact the technical service
department of MCZ.
5.5.4. Light on (if present)
Press button 5 to turn the light on or off.
The LED 5a indicates the status of the light.
5.5.5. Replacing the fuse of the control unit
The control unit is equipped with a fuse that protects the system
against voltage overloads.
When mains power is provided at 230V-50Hz, if none of the indicator
lights of the control unit come on, the fuse is probably faulty.
To replace it, proceed as follows:
remove the plate that covers the control unit
unscrew the two screws that hold the control unit to the wall
box
carefully extract the body of the control unit
open the plug and replace the faulty fuse with a working one
(about 1 A)
IMPORTANT!
All electrical connections must be performed by
qualified personnel in accordance with current laws in
each nation, using suitable equipment and in
compliance with the diagram indicated in this booklet.
All operations must be performed with the 230V 50 Hz
mains power cord disconnected.
Mcz shall not be held liable for damage to persons or
things due to incorrect connections or improper use of
the device.
ON
OFF
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MCZ Vivo 70 Wood bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MCZ Vivo 70 Wood in de taal/talen: Engels als bijlage per email.

De handleiding is 2,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info