PELLET STOVES Chapter 5
INSTALLATION AND USE MANUAL
page 51
Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited
8.2. PERIODIC CLEANING BY A SPECIALISED
TECHNICIAN
8.2.1. Cleaning of the heat exchanger
After the winter you will need to clean the compartment where
discharge smoke passes.
This cleaning must
be done in order to remove all combustion residues
before time and humidity let them harden and make them difficult to
remove.
ATTENTION!
You are advised to contact an authorised MCZ centre
for the cleaning of the upper exchanger.
CLEANING THE UPPER EXCHANGER
When the stove is cold, carry out the following operations to clean the
upper exchanger.
8.2.1.1.
Musa stove (steel sides) COMFORT AIR version
1. Remove the cast iron top.
2. Remove the steel sides A (see par. 3.4.4.)
3. Remove the upper plug L (4 screws)
4. Loosen the front screw of the bracket H; lift the bracket H in a
way to remove the front profile B.
5. Remove the front cast iron grid N with the two brackets M
6. Remove the fan group Q by unscrewing the 7 screws. To easily
remove the screw placed behind the left fan, it is advisable to
loosen the two screws of the fan and move it slightly.
7. To draw the fan group, remove the two front screws of the
cover P, lift it slightly and extract the fans.
8. Remove the exchanger O by unscrewing the 4 screws that
secure it
Clean and refit all the components by using a new front gasket.
