A A
B
E
TEMPERATURE
INFORMAZIONI
PROGRAMMI
IMPOSTAZIONI
ESCI
OK
C
D
B
E
AUTOECO
ESCI
OK
C
D
CARICO COCLEA
RICETTA ARIA
HYDRO-AIR
RICETTA PLT
CICLO PULIZIA
IMPOSTAZIONI
66
16 - CLEANING AND MAINTENANCE
CLEAN THE EXCHANGER AND THE COMPARTMENT BENEATH THE BRAZIER EVERY 2/3 DAYS
Cleaning the exchanger and the compartment beneath the brazier is a simple operation but very important if the boiler is to maintain
optimal performance.
We therefore recommend cleaning the internal exchanger every 2-3 days, performing these simple operations in sequence:
• Activate the “PULIZIA” (CLEANING) function – with the stove on press - menu (“E” key), select “IMPOSTAZIONI” (SETTINGS) using
the “C” and “D” key and press OK (“E” key), scroll using the “C” and “D” keys and select “CICLO PULIZIA” (CLEANING CYCLE), conrm
pressing “OK” (“E” key), activate the “ATTIVA CICLO DI PULIZIA” (ACTIVATE CLEANING CYCLE) function, conrm by pressing OK (“E” key).
This procedure starts the smoke extractor on the maximum setting to expel the soot that becomes dislodged when the exchanger
is cleaned.
• Clean the pipe unit - Using the provided hook ”A”, shake the rods located beneath the top rmly 5-6 times. This will remove any
soot that has deposited on the exchanger's smoke ducts during normal stove operation.
• Deactivate the “CICLO PULIZIA” (CLEANING CYCLE) function – this function is deactivated by pressing the “DISATTIVA CICLO
PULIZIA” (DEACTIVATE CLEANING CYCLE).
• Clean the smoke conveyor compartment (g. in following page) - The stove is equipped with a removable ash tray “G” which
collects any accumulations of soot and ash.
• Once cleaning is nished reposition the top and the ash tray“G”.
If such cleaning is not done every 2-3 days the stove could go into alarm caused by ash clogging after several hours
of operation.
