PELLET STOVES Chapter 3
INSTALLATION AND USE MANUAL
page 29
Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited
C
D
C
C
D
D
C
3.4.5. Assembly of ceramic side tiles onto NIMA stove
The eight ceramic tiles are delivered in a box. There shall be four
rectangles D which go in the middle part of the side panel and two
profiles C which go under and over the side panel.
Remove the top and slide in the first tile C with the rounded part
pointing downwards, making sure it is inserted adherently to the profile
and inside the brackets located on the structure.
These brackets B are already in place so that the ceramics C-D are
held in the best position of adherence on the stove; they have screws
with a slot for eventual adjustment (for example if the tile moves too
much or is hard to insert).
The lower tile C rests on two screws A which can be adjusted in height
so as to compensate eventual differences in size of the tiles; it is
possible to apply felt pads between one tile and another where
necessary.
When all 8 ceramics have been positioned (4 per side) reposition the
top by simply resting in on the rubber supports on the upper part of the
stove.
