643531
53
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
51
11-ALARMS
Technical Dept. - All rights reserved - Reproduction is prohibited
Exiting the alarm conditions
To reset the alarm, hold the ON/OFF button down for a while: the stove will check to see whether the cause of the alarm is still present or
not. In the rst case, the alarm displays again, in the second case it turns OFF.
The product can be switched on again only after the cause of the fault has been denitively eliminated.
Normal shut down (panel display: shutdown)
When the shutdown key is pressed, or when there is an alarm signal, the stove enters the thermal extinguishing phase which involves
automatic execution of the following phases.
pellet loading stops
the room fan keeps running at the set speed so that the fumes temperature reaches 100°C, then runs at minimum speed until the
shut down temperature is reached.
The smoke extractor fan is is activated at maximum speed and remains on for a xed period of 10 minutes, at the end of which if
the smoke T has dropped below 45°C (displayed in the INFO menu), the fan stops, otherwise it will continue to operate at minimum
speed until the temperature drops below the threshold, and then stops.
POWER FAILURE WITH STOVE ON (panel display: ACCENSIONE DOPO BLACKOUT (STARTUP AFTER POWER FAILURE)
for 10’, then ACCENSIONE (STARTUP))
In the event of a power failure, the stove does the following:
Power failure of less than 10”: continues the work in progress;
After a loss of power of more than 10’’ which occurred when the stove was on, or during ignition, you can restore the stove to its
previous operating condition when power returns as follows:
1 - Cool the system by activating the smoke extractor at minimum speed for 10’ then proceed to the next step;
2 - Restore the stove to the operating condition prior to the power failure.
During phase 1, the panel shows ACCENSIONE DOPO BLACKOUT (STARTUP AFTER POWER FAILURE).
During phase 2, the panel shows ACCENSIONE (STARTUP).
If during phase 1-2 the stove receives manual user commands from the control panel or remote control, it stops the blackout restoration
sequence and begins the start-up or shutdown commanded by the user.
If the stove experiences a loss of power greater than 10’ while it is shutting down, when power is restored to the stove, it will automatically
turn on in shutdown mode, even if the smoke temperature has fallen below 45°C in the meantime. This phase can be skipped by pressing
key 0/1 (skips to start-up) and pressing it again (recognises that the stove is o).
SAFETY ALARM A05
The safety alarm includes operation of the smoke pressure switch, of the open fuel loading door and stove door.
The time between the fumes pressure switch tripping and the alarm signal is 30 seconds, after which the stove is stopped (e.g. after 30
seconds with the pellet loading hatch open, alarm A05 is tripped).
53

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MCZ AMY Air bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MCZ AMY Air in de taal/talen: Engels als bijlage per email.

De handleiding is 5,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van MCZ AMY Air

MCZ AMY Air Gebruiksaanwijzing en installatiehandleiding - Nederlands - 64 pagina's

MCZ AMY Air Gebruiksaanwijzing en installatiehandleiding - Français - 68 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info