PROGRAMMER
MESSAGE
MESSAGE MEANING WHAT TO DO
During the Pyrolysis cycle
There has been a power cut.
Turn the function selector knob to
0 and wait for the flashing 12.00
to appear. Then start the program-
mer, set the time and start the
pyrolysis cycle again.
If the display goes out see the
specific chapter.
During the Pyrolysis cycle
The oven function selector knob
has been moved from the
Pyrolysis function to a cooking
function.
The oven cavity temperature is
higher than 300°C.
Wait for the door to unlock. This
happens automatically when the
temperature inside the oven has
dropped below 300°C (key LED
goes out); P0.00. will appear with
P flashing. Turn the oven selector
knob to 0 and repeat the opera-
tions to start the Pyrolysis cycle.
During a cooking function
Oven operation fault.
Turn the function selector knob to
0 and wait for the oven to cool
down so that the door unlocks.
Then unplug the oven and call the
After-Sales Service.
Close the oven door.
door locked
During the Pyrolysis cycle
The oven function selector knob
has been moved to 0 to cancel the
Pyrolysis cycle.
The oven cavity temperature is
higher than 300°C.
When the door unlocks, which
happens automatically when the
temperature inside the oven has
dropped below 300°C (key LED
goes out), the time will appear on
the display again.
After the Pyrolysis cycle
AUTO and P flashing.
The door is unlocked and can be
opened.
Turn the oven function selector
knob to 0.
During the Pyrolysis cycle
AUTO and P flashing.
The door has been opened and clo-
sed again.
The Pyrolysis cycle is cancelled.
Turn the oven selector knob to 0
and repeat the operations to start
the Pyrolysis cycle.