• Functioning (fig.5)
A= ON/OFF button
B= Key button
C= Timer Button +
D= Timer Button -
E= Key button ON/OFF warning light
F= Cooking zone selection button
G= Double cooking zone ON/OFF warning light
L= Double zone selection button
Q= Cooking zone display
R= Display Timer
Based on the model owned, the first time the stove top is
turned on it may be in the safety position, with the LED of
the ” Key button warning light ” (E) on.
In order to use the stove top it is necessary to press sensor E
for 3 seconds until the warning light turns off.
If the appliance is not used for at least a minute, the key func-
tion activates automatically.
- The appliance may be turned on by selecting start-up
sensor A. A zero appears on all displays for 10 seconds. If no
operation is carried out within the next 10 seconds the stove
top turns off.
- It is possible to turn a stove top element on by selecting
the “F+” or “F-” sensors within 10 seconds. If the “F+” sensor is
used, the display shows selection 1, if the “F-” sensor is used,
the display shows selection 9.
- Once this operation has been completed it is possible to
choose temperature adjustments using the “+” or “-” but-
tons.
- The stove top element may be turned off by selecting “0” with
the F sensor, after 3 seconds the cooking area turns off.
It is also possible to turn a stove top element off by selecting
the “F+” and “F-” sensors at the same time.
- The stove top may be turned off by selecting the main start-
up sensor A. If all stove top elements are on “0”, the stove top
turns off after 10 seconds.
- If the stove top is equipped with elements with an extension,
the second zone will start-up after it verifies that:
- the LED of the B key button is turned off, otherwise it will
disengage it.
- Press button A to turn the stove top on.
- Select the desired element and adjust the power using the
“F+” or “F-” buttons.
- Once the power is adjusted select the L button to activate the
double zone. Press the L button a second time to deactivate
the double zone.
- If an object is placed above the controls, the stove top will
automatically change to the OFF position.
When an element is brought to the OFF position and the glass
surface temperature is above 50°, the cooking area involved
will show an illuminated “H“ on its display.
- the B function blocks stove top functioning at the moment
of selection. Ex: if the function is activated while the stove top
already has two zones turned on, the program is blocked, even
if trying to turn on another zone. The same thing happens if
the appliance is turned off and the function is activated, the
stove top does not turn on.
In order to activate or deactivate it keep a finger above sensor
B for about two seconds. The function is active when the E
warning light is turned on.
Even with the key button is active, the A button works the
same.
Heat up (Rapid heating)
The Heat up function can be used to set the cooking zone
to its maximum temperature for a specified period of time,
after which the temperature will return to a lower value
selected previously.
To activate the Heat up function, select the hotplate by press-
ing the + button until setting 9 is displayed; if the button is
pressed again a decimal point "•" or the letter "A" will appear
on the display (next to the digit 9) for 5 seconds. This means
the Heat up function is active.
The desired power level (between 1 and 8) should be selected
within 5 seconds. If power level 9 is selected, the function is
disabled. To deactivate the Heat up function, simply select the
+ button and hold it down until setting 9 is reached and the
decimal point disappears from the display. When the “Heat
up” function is active, the previously selected temperature
level may be increased by pressing the (+) button. Once the
cooking zone has reached the selected temperature, the “Heat
up” function is automatically deactivated and the hob emits
a BEEP. The cooking zone will operate in a constant manner,
at the set power level.
Timer
This function makes it possible to set the cooking time after
which the zone will turn off.
Complete the following steps to activate it:
- Press the "C" button (00 will appear on the display), or press
the "D" button (99 will appear on the display)
- All cooking zone displays will show a lower case "t"
- Select the cooking zone that the timer will be used on using
the "F" button
- Set cooking level using the "F+" and "F-" buttons
- Set cooking time using the "C" and "D" buttons
- The end of the established cooking time will be signaled by
an acoustic BEEP (that can be deactivated by pressing "C" or
"D" or "F+" and "F-" on that specific cooking zone)
The display of the zone with an active TIMER will alternately
display a lower case "t" and the temperature level that has
been set.
In order to deactivate the function, before the set time ends,
press "D" and bring the time down to zero.
The Timer may only be activated on one cooking zone at
a time.
Minute Minder
This function makes it possible to set and acoustic reminder
during the cooking time that will not turn off the cooking
zone.
Complete the following steps to activate it:
- Press the "C" button (00 will appear on the display), or press
the "D" button (99 will appear on the display)
- Set cooking time using the "C" and "D" buttons
- At the end of the established timeframe there will be an
acoustic BEEP (it can be deactivated by pressing "C" or "D")
In order to deactivate the function, before the set time ends,
press "D" and change the time to zero.
The Minute Minder can be activated even while all cooking
zones are on.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE
ABOVE WARNINGS.
- 9 -
