522567
240
Verklein
Vergroot
Pagina terug
1/248
Pagina verder
The group of attachments (fig. 9.4) is
made up of:
• 1 nut A ( external cylindrical thread
ISO 228-1)
• 1 sealing washer “D
1 conical connection B (internal
cylindrical thread ISO 228-1, external
conical thread ISO 7-1)
• 1 Butane/Propane Gas connector “C”.
Exception for single unit cookers
that are not built-in.
These cookers must be connected by a
flexible elastomer hose with a built–in
undetachable mechanical nozzle. Only
use those hoses that are authorised with
the label “AGB/BGV”.
Two types of flexible elastomer hoses:
until April 2005, there were 2 types of
flexible elastomer hoses on the market:
- the old assymetrical model, including
an end with a fixed nozzle at the side
of the cooker, and a nozzle with a
loose nut and a built-in flat sealed joint
at the side of the inside fitting (stop
cock) .
- the new symmetrical model, including
a nozzle with a loose nut at both
sides, with a built-in flat sealed joint.
This symmetrical model is the only
one that will be available after the time
limit.
When installing a new cooker, or replacing
an existing one, the symmetrical model
must always be used.
Assembly
The gas inlet on the old cookers is equip-
ped with a conical thread ISO 7-1 and
the hose is assembled as follows:
1. apply a sealing product to the thread
on the appliance: a strip of teflon or
sealing paste for threads (colmat) plus
some acrylic wool;
2. tighten up the linking component (the
cylindrical inside thread ISO 7-1 to the
cylindrical ouside thread ISO 228-1)
with the two keys on the cooker;
3. check that the sealed joint is firmly
inserted inside the moveable connec-
tion on the elastomer hose (new
model);
4. tighten up by hand the elastomer hose
on both sides;
5. tighten up with a spanner;
6. open the stop cock and check that
there are no leaks (soap bubbles) by
smearing on a frothing product ).
Cookers must be connected using R
HT
materials downstream from the
AGB/BGV certificated gas stop-cock,
except for single unit cookers that are
not built-in.
As a general rule, cookers are connec-
ted downstream from the gas stop-
cock, by:
• copper pipes having an appropriate
wall thickness, or;
• steel pipes, or;
flexible R
HT
metal pipes with AGB cer-
tification, fitted in such a way that they
will not be crushed or pulled during
use. Their bending radius must not be
less than that specified by the manu-
facturer.
D
D
B
C
Fig. 9.4
A
BE
240
240

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw M-System MFTD-106 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van M-System MFTD-106 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 10,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info